Error Loading Text  for an Infoobject

Hi all,
          I get the following error when loading a Text for a given Object, it is someting related to 0LANGUAGE , any inputs greatly accepted.
"The data record 1 & with the key '000000000012 &' for characteristic
ZMATERIAL" & has a blank language key.                       
Thank you.

Hi Murali thanks for the response but can you please be more detail , Should I have to manitain 0LANGU , currently it is not maintained in our system , and all the values I checked in PSA (ZMATERIAL_TEXT) for Language Key is "EN".
thank you.

Similar Messages

  • Change the SWF loading text for a single presentation

    This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html

    Hi,
      I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
    When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
    But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
    And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
    Is there any workaround to correct that error?
    Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)).

  • "Error loading BASIC for document" while saving (solved)

    In case someone else has this problem here's my solution.
    I have a network (Netware 6.5) installation of SO7 (WinXP and 98).
    My PC's have harddrives that are protected by Deep Freeze.
    I start the Quickstart from a Run entry in the registry.
    Starting with PU5, the first time I save a document I get 10-15 "Error loading BASIC for document...". After clicking OK on all those the document is saved and everything works fine. If I close SO and and reopen it everything works.
    Rebooting the PC and trying to save a document gives me the error again (since Deep Freeze reset whatever change was made when I clicked through the error messages).
    After some hours of debugging I noticed that when the quickstart icon pops up in the systray a new directory named __basic_60 is created in the user directory of the client installation. Removing that prior to starting Write or Calc made the saving error dissappear.
    My workaround solution is to remove the gid_Procedure_Rename_Basicdir procedure and it's reference in gid_Module_Root in instdb.inf that's located in the program directory of my network install.
    However it must be a bug that the __basic_60 directory isn't removed as default, right?
    - Peder

    Dusty wrote:I deleted ~/.openoffice2 and it fixed the issue on reconfiguring it.
    If deleting the .openoffice.org2 directory is a bit drastic for you, you can fix the problem by going into ~/.openoffice.org2/user/basic and editing the dialog.xlc and script.xlc files.  You need to remove the line at the end that says WebWizard in both these files. 
    That will get rid of the two error messages you are likely getting.
    Btw, anyone else miss the Projects functionality in Kate?   Darn stupid sessions.  Oh well...

  • Error loading metadata for MBO

    Hi,
    I´ve migrated MAM 3.0 from Mobile 7.0 to 7.1 and I´m facing a strange problem.
    I´m testing MAM 3.0 for Handheld version on mobile devices and laptop. When I create a notification in MAM testing in a laptop and synchronize MI Client, it works perfectly, while that, when i create a notification in MAM in a mobile device and sync, i get the error:
    "error loading metadata for MBO"
    Checking in jscpout, i can see:
    Sync.jsp -- sequence 27 -- syncReplyReceived -- error MAM30_010
    The scenario is the same for both tests. Has anyone idea to solve it?
    Thanks.
    Bruno

    Hi,
    We´ve solved the issue. We are using MI 7.1 SP08 and after apply the composite notes for SP08, the problem is solved.
    Thanks.

  • Internal program error at: Text for characteristic

    Hi Expert,
    Need assistance in what i have encountered when i am making a transfer posting for my material to have a stocks, i already used MIGO, MB1C, and MB1B. when doing those even i have a production or purchassed order in hands, i am encontering " Internal program error at: Text for characteristic "
    i am hoping for your urgent solutions on this and how this occured for my posting?
    Thanks and Regards,
    JJ

    You should contact your ABAPer,by debugging he will tell you the real problem.

  • How to load texts to the infoobject?

    I am having old material infoobject with 7 attributes and loaded the data using flat file for that. Now the thing is I have to load the texts to this infoobject from 0TXTMD infoobject help me out to do this guys..

    Have you enabled master data for 0txtmd?
    by default this infoobject dose not have any table and i think its not supposed to be used for extraction.
    with absence of txt table for this infoobject DTP is giving you error saying source is not active but it actually might not be existing.
    go to infoobjects in RSA1 and look for 0txtmd infoobject then double click on it and see if you have any tables mentioned in this tab.
    I think you are trying to extract it from wrong place.
    Regards
    Sudeep

  • How to load text for Z-objects?

    Hello Experts!!
    I am implementinh HR for BI reports.
    Now in some of the Zobjects created for details like bank details(for acoount number etc) i am getting only the key values from the attribute datasource.
    How to get the releated text values.
    do i need to create a text datasource? How to link the text and attributes , so that we can load text and see it in reporting as well
    Thanks
    Shilpa

    Generally, you dont always need to create a text datasource if it is not relevant. Just uncheck the checkbox "With text" in the InfoObject itself. Otherwise if you need a text datasource, you need to identify the text table in source system or identify the table where the key value (and maybe other attributs) is existing and you can read the text. Then create a generic text datasource (if no standard text datasource is available).
    But your question seems to be, how to get more attribute and text in the same ZObject? Just adding attribut objects you need and match them with the attribut datasource. You can also use a charateristic field here for the text field. The text field will be a attribut of that ZOBJECT and you dont need to create an extra text datasource.

  • Loading hierarchies for 0GL_ACCOUNT InfoObject

    Hi,
    I cannot load hierarchies into 0GL_ACCOUNT InfoObject. I have created InfoPackage and in Update Data options I can only choose 'Only PSA' option. I have loaded attributes and texts without any problems. What should I do?
    Regards,
    Maciek

    Hi Maciej,
    Hope you had customized your 0GL_ACCOUNT hierarchy on R/3. Refer the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/97a16a65fb11d3971c006094b969cf/frameset.htm
    Bye
    Dinesh

  • Purchased MLB via 1 of my 3 appletv's. My oldest 2nd gen 720P shows "error loading content" for all games. What's up?  Also I can't get MLB to work on my iPad2, iPhone 4S or iPod 5th gen. Arrhhgg

    Purchased MLB via iTunes on 1 of my 3 appletv's. My oldest 2nd gen 720p shows "unable to load content" for all games , but my other 2 appletv's work fine, restarted problem appletv to no luck.  Also can't watch games on my ipad2 "unable to restore from iTunes" , iPhone 4s " unable to connect to MLB.com" or iPod 5th gen.

    Purchased MLB via iTunes on 1 of my 3 appletv's. My oldest 2nd gen 720p shows "unable to load content" for all games , but my other 2 appletv's work fine, restarted problem appletv to no luck.  Also can't watch games on my ipad2 "unable to restore from iTunes" , iPhone 4s " unable to connect to MLB.com" or iPod 5th gen.

  • Key being displayed instead of text for an infoobject.

    Hi,
    I have an infoobject DWBSELEMT for which the medium text is loaded in the text table.
    e.g. 1  EN  XYZ
          2  EN  MNP
    This infoobeject is used in a cube and the cube is a part of the multiprovider.
    I have a BEx report on the multiprovider and DWBSELEMT is displayed in rows with option "display key and text"
    However, the o/p of the report shows 1  1      instead of     1 XYZ
                                                          2  2                         2 MNP
    I have changed the BEx options in the infoobject, display properties in query and also in the multiprovider level, but still there has been no change.
    What could be the reason?
    Please help.

    Hi Simon,
    The infoobject does have actual texts loaded into the T table.
    The text type and BEx descp. options in the BEx tab of the infoobject are set to medium and long text.
    I have ran the query in other desktops as well, but no change..
    Kindly let me know if you have any inputs.
    Regards,
    Vinod.

  • Attribute data load fails for 0RPA_MARM Infoobject

    Hi BW experts,
    Attribute data load to the infoobject 0RPA_MARM(not a infoprovider) is on yellow status for long time and after it is throwing the below error
    Runtime Errors :UNCAUGHT_EXCEPTION
    Except                 : CX_RSR_X_MESSAGE
    I checked the forums for this issue but got the solution for target as infoprovider.
    Please suggest.
    Regards,
    Leo.

    Hi Leo,
    Basically loading data into Master data Infoobject and making it InfoProvider are two different things. Loading data in Master data infoobject will be same for all the Infoobjects and when you make them as Infoprovider you will get an advantage of doing reporting directly on top of that Infoobject.
    Regards,
    Durgesh.

  • Large documents and contents-errors in text - for thesis

    Hi - i´ll try to make it short. (quite experinced user on Mac and Pages - but hates Word)
    Large document like master/PhD on Pages 09 Version 4.1 (923) (using EndNote X4 for bibliography - but EndNote is not the problem! I tried it without...) - more than a hundred pages. (now with Lion 10.7.2 it seems to be even worse than with SLep).
    Content is numbered with up to four "levels" (like: 2.3.1.2 Xxxxxx). I seem to make a lot of things right because the content at the beginning of the document is correct with all the points (just the content is 4 pages long - and everything including the page-numbers is correct) -
    BUT:
    In the text most "sub-/headlines" or new points are correct - but some are just very wrong like:
    it should be 8.3.2.1 - instead it is 8.3.6 or even 2.1 - and everytime i try to change it its just wrong in another or the same way... - but in any case (as long as i am doing it right with tabs and using the right level) the content at the beginning of the document is correct.
    That is exactly why i hate Word - it just did the same crap (but Word also mixed up the footnote-numbering - in Pages 09 at least all the foodnotes are right).
    Any idea? - the next thing i will try is just to copy every paragraph into a new document - but i doubt that it will help - is there anybody at apple who could help???
    Greetings
    simplex

    I didn't answer either because I found your writing impenetrable and without the file to work with improbable we could talk you through it.
    It sounds to me like you have simply skipped a sequence somewhere and it has lost track of the numbering, or you got it to restart somewhere in an attempt to 'fix' your error.
    Peter

  • Loading Texts for 0CALMONTH

    All,
    I have seen this come up as a question on the Forums before but I haven't been able to find any answers.
    My texts table (/BI0/TCALMONTH) for 0CALMONTH is empty.  I need to know how to fill it so that I can use month text variables in my queries.
    Table T247 is populated, which appears to contain the descriptions I need, but how do I load these entries over to the text table of 0CALMONTH?  Is there a standard extractor or function module I should be using?
    We are on BI 7.0, SP17.
    Thanks for your help!
    Mischa

    I wrote a little report, maybe this could be helpfull:
       DATA: lv_year TYPE int4,
          lv_yearc(4) TYPE c,
          lv_monthc(2) TYPE c,
          lv_langu TYPE sy-langu,
          ls_calmontht TYPE /bi0/tcalmonth,
          lt_calmontht TYPE TABLE OF /bi0/tcalmonth,
          lt_montht TYPE TABLE OF t247,
          ls_montht TYPE t247.
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
    PARAMETERS p_year type int4.
    PARAMETERS p_langu type sy-langu.
    SELECTION-SCREEN END OF BLOCK block1.
    START-OF-SELECTION.
      lv_year = p_year.
      lv_langu = p_langu.
    * get all month of current language
      SELECT * FROM t247 INTO CORRESPONDING FIELDS OF TABLE lt_montht WHERE spras EQ lv_langu.
    loop at lt_montht into ls_montht.
      CLEAR ls_calmontht.
      lv_yearc = lv_year.
      lv_monthc = ls_montht-mnr.
      CONCATENATE lv_yearc lv_monthc INTO ls_calmontht-calmonth.
      ls_calmontht-langu = lv_langu.
      CONCATENATE ls_montht-ktx lv_yearc INTO ls_calmontht-txtsh SEPARATED BY space.
      CONCATENATE ls_montht-ltx lv_yearc INTO ls_calmontht-txtmd SEPARATED BY space.
      CONCATENATE ls_montht-ltx lv_yearc INTO ls_calmontht-txtlg SEPARATED BY space.
      APPEND ls_calmontht to lt_calmontht.
    ENDLOOP.
    modify /bi0/tcalmonth FROM TABLE lt_calmontht.
    write: 'finished'.

  • Error loading file for Pro-53 plugin

    Greetings,
    I keep having to tell Logic 8 Pro where the file 'def.p5a' is located everytime I load the Pro-53 plugin.
    Any help?

    This is a Pro-53 default patch bank. Either it's not in the right place, or it's an issue with Pro-53 - in either case, this is an NI issue and nothing to do with Logic.

  • Texts for BRAN2-load into bi

    Hi
    i am loading keys for Bran2 using datasource 0customer sucessfully into BI
    now i want to load texts for it in bw
    what is the datasource for text for bran2???
    my understanding is using master data process chains all they keys will load everyday for bran2
    but i have to load texts using seperate infopackage for bran2
    funny i can find datasource for loading texts for bran3,4,5
    but not for bran1 and bran2

    Hi there:
    In case no Standard DataSources for loading Bran1 or Bran2 Texts exist, after identifying the fields on R/3 side that feed the InfoObjects on BW you need to create Generic Extractors from Domain.
    For the necessary steps refer to the blog provided by Yogesh Patil "Extracting data from Domain (Text Master data)".
    /people/yogesh.patil5/blog/2009/12/16/extracting-data-from-domain-text-master-data
    Regards,
    Francisco Milán.

Maybe you are looking for