Error loading web page

Not sure if this is the place for this, but I'll take whatever I can get
Am trying to open a web page that opens on a desktop unit
www.ngs.noaa.gov/UFCORS/UFCORS2.jsp
When I try to open in my laptop, I get:
Error page UFCORS2
An error occured in the bean. Error Message is: null
Stack Trace is :
java.lang.NullPointerException
     at java.util.StringTokenizer.(StringTokenizer.java:119)
     at java.util.StringTokenizer.(StringTokenizer.java:135)
     at org.apache.jsp.UFCORS2_jsp._jspService(UFCORS2_jsp.java:139)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:536)
Any Ideas?

Hello Wendi,
And welcome to Apple Discussions!
Have you had a chance to look at and work through the potential troubleshooting techniques described in this Apple support document? If not, it would be a good place to start.
[iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections|http://support.apple.com/kb/TS1398]
B-rock

Similar Messages

I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures. For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box.

I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures. For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box instead of pictures. If I restart the problem will go away temporarly. However, normally returnes in time.

HI,
From the Safari Menu Bar click Safari/Preferences then select the Appearance tab. Tick the box next to: Display images when the page opens.
If that box is already ticked, from the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still have problems loading images, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
Carolyn

Safari cannot load web pages, but still communicates with the www

I am using Safari 6.0.5 as my main web browser. Unexpectedly, a week ago it stopped loading web pages, though apparently the program somewhat still communicates with the world outside, since I can enter any text in the address bar and get responses in real time from Google.
Other programs using the internet work regularly. I have already tried the usual set of solutions proposed in the official documents.
Thanks in advance,
Valerio

16/07/13 08:32:44,048 SubmitDiagInfo[305]: Launched to submit Diagnostics and Usage
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,456 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,212 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,215 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,216 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,026 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,028 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,029 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,687 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,347 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,348 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,349 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,794 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,796 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,797 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:45:31,399 WindowServer[85]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSGetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSSetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,438 loginwindow[57]: ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
16/07/13 08:45:31,782 WindowServer[85]: Created shield window 0x5a for display 0x04280380
16/07/13 08:45:31,783 WindowServer[85]: device_generate_desktop_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,873 WindowServer[85]: device_generate_lock_screen_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,929 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:45:31,930 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:46:31,374 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,374 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,528 launchctl[319]: launchctl: Couldn't stat("/Library/LaunchAgents/com.oracle.java.Java-Updater.plist"): No such file or directory
16/07/13 08:46:31,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
16/07/13 08:46:34,000 kernel[0]: LE is supported - Disable LE meta event
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:34,000 kernel[0]: Wake reason: EHC1
16/07/13 08:46:58,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: Previous Sleep Cause: 5
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
16/07/13 08:46:58,000 kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
16/07/13 08:46:58,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
16/07/13 08:46:58,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:46:58,000 kernel[0]: en0: 802.11d country code set to 'X3'.
16/07/13 08:46:58,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: TBT W (2): 0x0100 [x]
16/07/13 08:46:58,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: HID tickle 175 ms
16/07/13 08:46:58,297 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:46:58,000 kernel[0]: NVRM: 0x702a called in D3
16/07/13 08:46:58,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2004), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5b for display 0x003f003d
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5c for display 0x003f003e
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,881 WindowServer[85]: Created shield window 0x5d for display 0x003f003f
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,923 loginwindow[57]: resume called when there was already a timer
16/07/13 08:46:59,000 kernel[0]: en0: 802.11d country code set to 'IT'.
16/07/13 08:46:59,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:59,061 configd[17]: network changed: v4(en0-:10.0.1.2) DNS- Proxy- SMB-
16/07/13 08:46:59,328 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:47:00,000 kernel[0]: MacAuthEvent en0 Auth result for: b8:c7:5d:05:67:5e MAC AUTH succeeded
16/07/13 08:47:00,000 kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
16/07/13 08:47:00,000 kernel[0]: AirPort: Link Up on en0
16/07/13 08:47:00,000 kernel[0]: en0: BSSID changed to b8:c7:5d:05:67:5e
16/07/13 08:47:00,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:47:00,000 kernel[0]: AirPort: RSN handshake complete on en0
16/07/13 08:47:00,651 configd[17]: network changed: v4(en0+:10.0.1.2) DNS+ Proxy+ SMB+
16/07/13 08:47:00,660 UserEventAgent[11]: Captive: en0: Not probing 'Ayn Rand 5 GHz' (protected network)
16/07/13 08:47:00,663 configd[17]: network changed: v4(en0!:10.0.1.2) DNS Proxy SMB
16/07/13 08:47:02,248 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:02,263 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:32,956 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,107 com.apple.backupd[330]: Backup failed with error: 19
16/07/13 08:47:33,107 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,552 com.apple.backupd[330]: Attempting to mount network destination URL: afp://***;[email protected]/Time%20Capsule%20di%20Valerio%20Fi l
16/07/13 08:47:34,000 kernel[0]: AppleSRP started.
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=339[ksadmin] clearing CS_VALID
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=343[ksadmin] clearing CS_VALID
16/07/13 08:47:42,707 com.apple.backupd[330]: Mounted network destination at mount point: /Volumes/Time Capsule di *** using URL: afp://***;[email protected]/***
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount: /Volumes/Time Capsule ***, pid 332
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80df13a008 /Volumes/Time Capsule di *** (error = 0, retval = 0)

Often unable to load web pages.

My MacBook har suddenly decided to not load web pages ...
I surf around, and maybe one fifth of all the web pages won't load in my browser (both Firefox and Safari). It isn't something about the web pages, because after some time I can get them to load perfectly. I contacted my ISP, and they couldn't find anything wrong. Besides, I can surf just fine from other computers (non-Macs).
I wondered if it was something about the port, since all other apps work perfectly (for example Google Notifier and Audium is always connected), but https doesn't any better. I've also pinged web sites for a long time, without any evidence of something being wrong. One strange thing is that traceroute sometimes gives me "no such host," and then a moment later, it works with the same address.
It's not Airport either, because I now use a network cable and have the same problems.

There are several possibilities that come to mind.
Since HTTP transfers often fail, but lightweight protocols such as AIM don't, my first thought is MTU (Maximum Transmission Unit).
The standard MTU for ethernet networks is 1500 bytes. This means that all transfers are broken into chunks of 1500 bytes each before being sent over the network. In some cases, certain network configurations (such as DSL links that use PPPoE) require a lower MTU such as 1492 or even 1460.
Normally this isn't a problem since the router tells the client what MTU to use but sometimes this doesn't work - especially if you're using a NAT device.
When there's a mismatch your Mac doesn't know that it needs to use a lower MTU so sends traffic upstream at 1500 bytes and the router chokes when it tries to cram that data into its 1492 link.
This is why lightweight protocols often work - the typical AIM packet is less than the MTU and therefore doesn't need to get truncated. However, large file downloads exceed the MTU and run into problems.
If this is the case you can force your MTU to be lower using the System Preferences -> Network -> <interface> -> Ethernet tab. Switch from Automatic to Manual and you'll see options for changing the MTU. Try lowering it to 1460 to see if it works. If it does you can try increasing it until you find the optimal value.
If it wasn't for your statement traceroute sometimes gives me "no such host" I'd be sure this was the problem. However, MTU doesn't usually cause DNS failures since most DNS requests are small.
If your DNS is failing and the ISP belives the DNS server is working correctly, that hints at a link-level problem. Packets are getting lost somewhere along the link between you and the server.
The first thing to check here would be speed and duplex. The fact that you've used both AirPort and wired connections hints that it's not a problem directly on your machine, but what about the rest of the links between you and the router? I'm guessing you have an ethernet cable between your base station and a switch, maybe another cable between that switch and the router? Either of these cables could have a mismatch.
Without knowing the switch it's impossible for me to tell how you check the switch port configuration - some switches have LEDs on each link that tell you the speed and duplex, others have a command line or web interface that will give you port status and statistics. If you have such a switch, check it. Also check the switch logs if you can - you'll often see error messages such as 'excessive CRC errors' which can indicate a duplex mismatch.
If you can't get the information from the switch, try manually configuring your devices. The same preferences tab where you set MTU can also be used to set speed and duplex. Just be aware that if you choose a combination that the switch doesn't support (e.g. you choose gigabit but you're connected to a 100mbps switch), then the link will go down.
Try different options to see if any of them work any better for you.

Why will safari not load web pages with the prefix "fhp"?

Why will safari not load web pages with the prefix "fhp"?

Because it doesn't recognise them as valid addresses - just as the error message says.
Firefox is similar : Firefox doesn't know how to open this address, because the protocol (fhp) isn't associated with any program.
Where are you seeing this problem ?.

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. I can ping external websites fine from the guest. No proxy. Any ideas?

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. Also tried the latest 3.6 version. I can ping external websites fine from the guest. No proxy. Any ideas?
== This happened ==
Every time Firefox opened
== I installed a guest OS

I'm using the same swear words as you. There are several threads about this problem - no answers.
I have a LaserJet 8100N and 8150DN, get the 79.01FE error on the 8150 from print outs from Safari, Firefox, and Preview, for only some sites/documents. CNN.com has become my test site, seems I can crash the printer 90% of the time with their home page at any given time in the day.
A summary of what I have tried:
- Upgraded the firmware to the latest for both the JetDirect card and the printer.
- Swapped the JetDirect cards between the 8100 and 8150.
- Swapped ram on the 8150 board.
- Disconnected external trays, bins, and removed extra RAM and hard drives from the 8150.
- Tried setting the JetDirect link and matching switch port link to 100FD, 10HD, 10FD, 100HD, as suggested by a poster.
- Tried having client's print to the printer through a XServer Print Server.
- Can consistently create the error from multiple systems running 10.3.9, 10.4.5, and 10.4.6 (didn't have an install base of 10.4 before 10.4.5).
Someone in the 'know' (which means they're likely not), said 10.4.7 will likely fix this. Being Apple has not even addressed that the problem exists (that I could find), I doubt the magic fix is a release away.
Apple's software is triggering something that Windows systems appears not to be, so one could say it's an Apple problem; but ulimately it's HP's software/hardware that is at fault in that it is allowing their system to crash from input alone.
G4/G5 XServes

I'm using Safari 5.0.5 on a 13" MacBook Pro and can't get Safari to fully load web pages or pictures on web pages. Any suggestions?

I bought a MacBook Pro in October of 2010 and it's been running greatly up to this month. Now I am experiencing problems with Safari loading web pages. Sometimes it will load web pages just fine and other times it doesn't load web pages at all. This only seems to happen with certain sites. Also, on some web pages Safari won't load pictures (only the blue "?" is visible). I've experienced the same problem when I use the Mac App Store. In addition to these problems, when I visit sites that have problems loading, sometimes I just get a notice saying "Not connected to the internet" or "Safari cannot find the server." I am beginning to wonder if the problem could be some setting with my wireless router. I'm really hoping my MacBook hasn't gotten a virus. Any help would be greatly appreciated.

Hi.
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply

Firefox will not load web page (I also have Internet Explorer 8 installed).

Fire Fox will not load web pages. It may have something to do with proxy settings but I have reset this to Auto-Detect which is where it has always been in the past but still nothing. Something has reset my proxy settings in the past which caused a similar problem but doesn't seem to be the issue this time. I have Internet Explorer 8.0 installed on computer right now and it seems to work.

After looking into this further I checked firewall settings in Panda A.V. For Firefox they were set to Custom settings which effectively disabled it. I changed setting to Outbound only like Internet Explorer and other programs and Firefox seems to work fine now. Hope this helps others who have experienced this problem. I have teenage children who use computer a lot (Face Book, etc.) so the root of the problem may have been Malware, Adware, or something else but hopefully Panda has taken care of this.

Help! Safari won't fully load web pages until I refresh! Why and any suggestions on how to retify this??

For several months now safari has not been loading web pages properly (not them all, it is a bit random, but maybe every 3rd or 4th page I open?). The blue loading bar gets to about 1.5 inches from the end and stops. I can then click on the bar and refresh and it loads no problems but this is highly inconvenient and I can't seem to fix it.
I have reset safari, updated all software, I am on a mac book pro, I have Version 5.1.5 safari.
Would this be an internet problem rather than a software problem? How would I check.
It's not very convenient when you're doing something important like trying to get tickets for an event and then it jams, and you know you need to refresh but if you refresh you've lost the tickets...
Any suggestions welcome

Hi Krisztina ..
Using OpenDNS can help when pages won't load properly.
Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, blocks the flashback trojan, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Apple suggests using OpenDNS here > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Having issues with loading web pages after using migration assistant

Last week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

If your still having problems, or anyone else......
For future info, your in the wrong forum, your need the MBP area, this is the MacPRO area, no big deal, I can barely keep up with the M & B & P, etc...
Sounds like when it migrated over your old settings it may have gotten corrupted? It has been known to work if you were to just make another "Location" and just re-enter the information again and sometimes that will help. You might take it back to the store and see if it does it on their connection also. The silly person should have tested it first before letting you go.
Hope you got it fixed...

Blue banner bar not loading web pages

I'm having or have had for some time a problem with pages fully loading on Safari 3.2.1. Even now as I write this the blue banner bar only loads to about 75% and stops. Other times is less than 50%.
I have 12.1 GB out of 40.0 GB free on my iBook. I run updates and do disk utility weekly or as needed when things get updated.
Not sure if it's something in the system that gets stuck trying to search and load RSS feeds, but it seems to start there. Especially starts up when I use Gmail. When using Gmail the banner never completes and when I sign off the banner bar just does not ever fully load. I have to close out Safari and start over.
I'm at a lose as to what is going on.
I can understand that when I'm at a hotel using a low speed Wi-Fi that things go slow or don't work the right. But, at home where I have high speed airport it doesn't make sense.
Any thoughts what I can do?

capt_smiley wrote:
Hope someone can help me on subject problem. My 5530XM suddenly cannot load web pages nor web feeds for some reason. WLAN connection is active and I'm able to browse the web using Opera but the default browser just cant open any web page.
Allow all content and enable javascript in the default browser settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Safari not loading web pages

My mom's Powerbook is no longer able to load web pages through Safari. Her email works, as does iChat, so it isn't her internet connection. Other users on the same network can load web pages, so it isn't the service provider. I have had her reset safari, as well as remove the preferences file, and the same thing happens (the 'loading' message appears but nothing ever loads).
Any suggestions what to try next?
Thanks!
Brian

HI Brian,
From the Safari Menu Bar, click Safari / Empty Cache.
If that doesn't help, go to ~/Library/Caches/com.apple.Safari/ Move the Cache.db file to the Trash
If that didn't help...
Go to ~/Library/Internet Plugins and /Library/Internet Plugins. If there are plugins in either of those folders, move them to a temporary location on the Desktop. With Safari open, from the Menu Bar, click Safari/Preferences and click the Security tab. Make sure Enable Plugins is selected. See if Safari can load web pages. If not, move those files back to the appropriate folder.
Go to /Library/Input Managers. Move any input managers from that folder to the Desktop and relaunch Safari.
Might be a web clip causing the problem. Open Dashboard and remove any web clips.
If she is running Tiger 10.4.11, open System Preferences/Software Updates - Installed Updat4es and make sure she has the 2009-002 Security update installed. If not, download and install it here.
http://support.apple.com/downloads/SecurityUpdate_2009_002__Tiger_PPC
If her PowerBookG4 has the original hard drive, 40 or 60GB?, it might be a lack of free disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Carolyn

Browsers not loading web pages.

Hi there I'm hoping someone can help me with this.
This evening I logged on to my mac to find that none of my browsers (Safari, Chrome and Firefox) could load web pages. My MacBook Pro connects to the Internet via wifi. All other devices (wired and wireless) connected to the router work and even when the mac is hard wired it works. I have a bootcamp install of windows that works fine.
I tried loading all 3 browsers on another users account to no avail as well as attempting it in a guest account. I also attempted to load pages whilst booted in safe mode again to no avail. The strange thing is, when I connect to my universities VPN the browsers all work fine.
I have also noticed that applications installed that show in the menu bar (weather, Dropbox etc) do not work unless the mac is hard wired (or connected to the VPN wirelessly).
Can anyone help with this problem please?

First contact your ISP. You need to confirm that the issue is not on their end.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Configuring 802.1X in Mac OS X Lion and Later
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
OS X Mountain Lion: Check the status of your network connections
OS X Mountain Lion: Requirements for wireless Internet access
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
If using one of Apple's Airport routers, read its user manual or post in its forum area. If using a 3rd party router, read its user manual, contact their tech support department/website or post in its forum area. Another possible solution - read mammothsuziq response https://discussions.apple.com/message/22082360#22082360

Web Browser 5530XM Not Loading Web Pages

Hope someone can help me on subject problem. My 5530XM suddenly cannot load web pages nor web feeds for some reason. WLAN connection is active and I'm able to browse the web using Opera but the default browser just cant open any web page.

capt_smiley wrote:
Hope someone can help me on subject problem. My 5530XM suddenly cannot load web pages nor web feeds for some reason. WLAN connection is active and I'm able to browse the web using Opera but the default browser just cant open any web page.
Allow all content and enable javascript in the default browser settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Issues loading web pages on brand new machi after using migration assistant

ast week my old macbook pro died and i purchased a new 13" mbp. I brought it home the first day i bought it and just turned it on and started playing with it and the internet was blazing fast, no issues at all. I then brought it back to the apple store where they peformed a migration from my old hdd to my new macbook pro. I then took it back to my dorm and connected to the same exact internet and now i am having problems loading web pages. Sometimes the page will load on the first try (click) and other times it will hang there loading but never fully load the page, and if it does load somewhat certain things are missing from the page. So i have to click the link again, and again, and sometimes again for it to finally load correctly. I dont know what is wrong but i have a feeling it is files from my old system conflicting with new ones when it comes to loading web pages. Everything is up to date the OS and firefox and i am having the same issues in safari. Also my ipad and blackberry have no problem connecting to the wifi so that is not the issue. I really hope someone can help me out because this is really starting to drive me crazy.

First place to look is your System Preferences/Network DNS Server Settings ...
If you haven't been provided with any by college IT then use the ones suggested here:
http://www.dnsserverlist.org/

Error loading web page

Similar Messages

Maybe you are looking for