Error locking object in SPAU after 3.5 upgrade

Hi,
When I try to change the status of the object either "Reset to Original" or "Adopt Modifications" I get the message saying that "Error Locking the Objects".  What does that mean?  Does it mean that I dont have auth to modify the objects?
Also I would like to know what does the STOP sign mean when I complete adjusting the object mean?
Thanks

Hi,
This looks like the object referred is still locked in the transport system, which means it's contained in a change request, for which you don't have a task opened, and thus, you're not allowed to acquire the lock for yourself.
My suggestion is that you find the change request, create a task for yourself, and then try to adjust the object.
BTW, this is a general Netweaver question, unrelated to BW, so you'd get many more responses on those forums.
Best regards,
Daniel

Similar Messages

  • "Object reference not set to an instance of an object" error while accessing document libraries after in place upgrade to SP 2010

    I performed an inplace upgrade on my sharepoint 2007 installation and post the upgrade while trying to browse the document libraries on the site i get the following Error. HAs anyone encountered a similair error?? What could be the cause and resolution
    for this
    Any pointers/solution appreciated.
    Description: An
    unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
    Exception
    Details: System.NullReferenceException: Object reference not set to an instance of an object.
    Source
    Error: 
    An unhandled exception was generated during the execution of the
    current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack
    Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +682
    Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
    Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
    Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
    System.Web.UI.Control.PreRenderRecursiveInternal() +11032094
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
    Version
    Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955
    My SharePoint Blog
    http://dhireny.blogspot.com

    How to be in my case??
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +694
    Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
    Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
    Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
    System.Web.UI.Control.PreRenderRecursiveInternal() +11141054
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Control.PreRenderRecursiveInternal() +223
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393

  • HT1414 my password lock is not working after my last upgrade

    I just upgraded my iPad and now my password lock is not working.

    Hi krburke,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    I hope this information helps ....
    - Judy

  • Special Character Error in Message in PI after PI-PRD Upgrade

    Dear Experts,
    We had a PI PRD upgrade 3 days back  from (PI NW 7.3 ) from SP-07 to SP-11.
    After this upgrade we ar facing one peculiar issue which was not there before upgrade.
    The messages containing special character like '&', ", etc is not getting parsed and throwing error.
    The messages having no such characters are passing smoothly.
    Is it upgrade related issue??
    Thanks
    Sumit

    Hi Sumit,
    There is not a problem to introduce a java mapping in a response of a ECC system, at least if you are not using a standard PI software component. You can set in the response Operation Mapping, two mappings, the first one the java mapping and the second one your current mapping.
    Java Mapping example: Java Mapping: To change the encoding type or replacing special characters.
    Regards.

  • Error Code 2300 on Restore after failed Os4 upgrade.

    Pretty simple. Attempted to upgrade to the new Os4 with a 2nd gen iPod touch. For whatever reason, iTunes recognizes it, but the update failed which sent it into recovery mode. After 6 attempts at a restore, error code 2300 doesn't fail to pop up while preparing the iPod for restore. I've also tried 3 different USB ports- aiming for different computers later in the day. I don't want to have to invest money into a newer iPod - even though this one is 1 1/2-2 years old just about. Thankfully music is on the computer happily waiting to be loaded back in - so the only issue is getting the iPod itself to restore or SOMETHING. Paper weight - no thanks.
    Any help is appreciated.
    -Mare.

    I have the same issue. from what i've gathered the issue is with the data transfer via usb
    try a different computer

  • Error deploying to iPod touch after 2.0 upgrade

    Been in the developer program a while and haven't had any problems with putting apps to my iPod touch until now. Downloaded the release version of the SDK, then I started having problems. Also have purchased release 2.0 software for the Touch and have it installed. When I try to Build | Go from Xcode, I get the following error:
    Your mobile device has encountered an unexpected error (0xE8000001) during the install phase: Verifying application.
    Anyone know what this might mean? First suspected the 2.0 software, now I'm starting to think more about certificates/profiles. XCode lists the device just fine as 5A347. Also has my provisioning profile checked.
    One other thing that is strange is in the Apple docs on Multiple Applications they just released, it mentions checking in Key Chain under the Keys category. I don't see anything related to this in that category. But I do still have certificates listed in the System keychain.
    I guess it is time to wipe out all the profiles again and start over. Any other ideas? Really what I'd like to see is a log file or something that gives me the real error, or at least the thing its trying to verify when it errors out.

    I had forgotten about that in my new App. Changing it didn't help though. Also, the app that I have successfully deployed to the device before (and is on the AppStore now) has the same error. And it's identifier was already set.
    Just for reference though, I'm setting my Identifier to the same thing that is listed in XCode under Organizer | Provisioning. And that is the same as listed under Name in the AppIDs section of the Program Portal. I also had used a * for the Bundle ID when I setup that AppID.
    Thanks for the thought. Don't think that is the problem though. At least changing it to the above didn't seem to have any affect.

  • Error 1604 - Can't restore after 2.0 upgrade

    I have already reported this problem to Itunes and made a visit to the "Genius Bar". It was bricked during the firmware upgrade to 2.0 and all the Genius bar could do is restore it to the previous firmware even though I have a receipt showing I purchased 2.0. Ugh!!
    Anyway, in searching my hard drive, I cannot find the 2.0 firmware and it looks like it never downloaded in the first place. I have searched for files with ipsw extension and there's nothing, anywhere. Are you allowed to download again for free? Maybe this is why it bricked trying to load a file that wasn't even there? Any insight and/or help greatly appreciated!

    People who have still not solved error 1604 and had a bricked iPhone no matter what they tried, might manage to revive it by following these instructions (on how to downgrade from 2.0 to 1.1.4).
    You will need the following:
    - iTunes 7.5 (NOT 7.7)
    - iPhone firmware iPhone1,11.1.4_4A102Restore.ipsw
    Step 1:
    Uninstall iTunes 7.7 completely if you have it and restart your computer.
    Step 2:
    Install iTunes 7.5
    Step 3:
    Your iPhone should be in 2 states, either stuck on the "Slide to make emergency calls" screen, or you tried to restore before and it's stuck on the new look "connect to iTunes" screen. Either way you're ok.
    Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). To do this, hold the power & the home button down for about 9 seconds.
    Why 9s? Well people say 10s, but it depends how slow you are at counting. Too short and it doesn't work, too long and the apple logo appears.
    When you hit about 6-7s the screen should turn off, leave it for 2 more seconds and release the power button, STILL holding the home button. If all went well, you should NOT see an apple logo, the screen should be dead.
    Keep holding home until windows/Mac informs you that it's found new hardware, OR iTunes tells you that your iPhone is in recovery mode. Remember, screen should be blank.
    If you see an apple logo, repeat the process for less time until you get it right. Took me a little time.
    Step 4:
    Shift/Option click the restore button in iTunes and select the iPhone1,1_1.1.4 firmware you downloaded.
    Fingers crossed it should restore back to 1.1.4.

  • Error installing or removing Itunes after trying to upgrade to 7.6

    Hi There,
    I recently tried to upgrade to 7.6 from 7.5 and this has caused me some issues.
    Firstly when upgrading a dialog box opens stating that itunes.msi cannot be found in local settings - however it was there. I manually moved to the path still to no avail.
    I followed all steps to remove itunes and do a clean install - as stated in the support site "how to uninstall section". This failed at the add remove stage. Stating "The older version of itunes cannot be removed. Please contact your technical support group".
    As there was no add remove option I removed all references to itunes in my local settings folder, program files and registry and went to reinstall, however I am still getting the same message above when tryin to install.
    Now I am stuck with no version of itunes at all on my PC. If anyone could help I would greatly appreciate it.
    Do Apple have a default "scrubber" that will remove all reference/instances of itunes?
    Many Thanks,
    Martin

    I'm having the same exact problem! The only diffrerence is that I haven't unistalled my current version and it still works. But I REALLY want those new iPod Touch Apps! But they require 7.6! Why is it when ever Apple does something great for us they some how find a way to screw us at the same time.
    I don't want a scrubber however cause that migth wipe my settings and or library. Instead I want a magic file that fixes what ever apple screwed up and intalls 7.6!
    ....Or I suppose a copy of iTunes.msi for my version would do to....
    My iTunes version is 7.4.3.1

  • I keep getting this error message on my Mac after my Mavrick upgrade: This web page is being redirected to a new location. Would you like to resend the form dat

    how do I turn off this notification. I build web stores and this pops up when I access my store now. The stores have a redirect with masking through godaddy.com to hide the source of the store. I have reset fire fox, turned off most of the settings and still having issues. most of the forms on line are outdated.
    Thanks

    There is a way to turn off the warning for a 307 "temporary" redirect. However, bear in mind that customers will still see it, so you may want to reconsider the design for business reasons.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box that appears above the list, type or paste '''redi''' and pause while the list is filtered
    (3) Double-click '''network.http.prompt-temp-redirect''' to switch its value from true (the default) to false.
    References:
    * [https://support.mozilla.org/en-US/questions/779492 I receive this usually in facebook only. " This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" How can I stop this?] - related to filtering/protection service
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=818850 818850 – The dialog "...new location..." is too annoying and is misleading about the page it comes from] - information about the bug tracking system:
    ** [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette]
    ** [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting]

  • Error trying to sync iPhone after IOS 7 upgrade

    Since upgrading to IOS 7 I can no longer sync my iPhone I get this message:
    I've tried rebooting both my MacBook Pro and my iPhone and still get the same message.
    Has anyone else run into this?  Is there a workaround?

    An iPhone can be synced with a single iTunes library only.
    When syncing an iPhone with a different iTunes library on the same computer, or with an iTunes library on a different computer, all iTunes content on the iPhone will be erased and replaced with the chosen content from the new or different iTunes library.
    http://support.apple.com/kb/HT1296
    This is why maintaining a backup of all your important data - including your iTunes library stored on a external drive used for backup purposes only, or stored on some other media is so important.
    iTunes includes an option to transfer content purchased from the iTunes Store from an iPod or iPhone, but this is for content that was purchased from the iTunes Store only.
    Without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.

  • Ipad locks up after iOS 8 upgrade

    WWhy does ipad lock up in safari after iOS 8 upgrade

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • JDAPI Error: ORA-04020: deadlock detected while trying to lock object

    I have written a JDAPI program to perform read-only impact analysis and report any problems.
    The following error is occurring:
    "A deadlock among DDL and parse locks is detected.
    This deadlock is usually due to user errors in the design of an application or from issuing a set of concurrent statements which can cause a deadlock.
    ORA-04020: deadlock detected while trying to lock object /NSPC6/CHECK_FOR_FORM_CHANGE"
    The error refers to a procedure in a PL/SQL library.
    In one case the error occurred after my final "end of processing" message, which is followed only by a call to "Jdapi.shutdown()".
    Any ideas?
    Thanks,
    Neville Sweet.

    I have written a JDAPI program to perform read-only impact analysis and report any problems.
    The following error is occurring:
    "A deadlock among DDL and parse locks is detected.
    This deadlock is usually due to user errors in the design of an application or from issuing a set of concurrent statements which can cause a deadlock.
    ORA-04020: deadlock detected while trying to lock object /NSPC6/CHECK_FOR_FORM_CHANGE"
    The error refers to a procedure in a PL/SQL library.
    In one case the error occurred after my final "end of processing" message, which is followed only by a call to "Jdapi.shutdown()".
    Any ideas?
    Thanks,
    Neville Sweet.

  • Error while lock object creation

    Hi
    When I tried to create a lock object, I get the following error.
    Error: "Total length of lock argument for table XXXXXXXXX longer than 150"
    I have 3 tables in which Table1 is the check table for the value tables (Table2 & Table3). During the process of deletion of a record from Table1 (CT) I need the lock tobe established on value tables and then I delete all the corresponding entries in value tables are also deleted.
    Would like to know If there is any other std ways of doing this ? and
    Solution to overcome the error.
    Regards
    Karthick

    Hi,
    I think the error is becoz you have given too many LOCK parameters in the lock object. the total length of the PARAMTERS of lock object should not exceed 150.
    By default all the KEY fields will be taken as Lock paramters, so your table key's length is more than 150.
    Also why dont you create 3 lock objects for each table and then use only KEY's of each table as LOCK PARAMETERS.
    Then Lock T1 record first then lock T2 and T3 records, then delete records from T2 and T3.
    Then you delete T1 record.
    The execute DEQUEUE_ALL.
    Regards,
    Sesh

  • I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    i am trying to generate purchase order and i create a BAPI also which is active.
    But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    Hi,
    Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
    This is my CODE-
    FUNCTION ZBAPIPOTV2.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(POHD) TYPE  ZPOHD OPTIONAL
    *"     VALUE(POITEM) TYPE  ZPOITEM OPTIONAL
    *"  TABLES
    *"      RETURN STRUCTURE  BAPIRET1 OPTIONAL
    data: ls_pohd type bapimepoheader,
             ls_pohdx TYPE bapimepoheaderx,
             lt_poit TYPE TABLE OF bapimepoitem,
             lt_poitx TYPE TABLE OF bapimepoitemx,
             ls_poit TYPE bapimepoitem,
             ls_poitx TYPE bapimepoitemx.
       MOVE-CORRESPONDING pohd to ls_pohd.
       MOVE-CORRESPONDING poitem to ls_poit.
       ls_pohdx-comp_code = 'x'.
       ls_pohdx-doc_type = 'x'.
       ls_pohdx-vendor = 'x'.
       ls_pohdx-purch_org = 'x'.
       ls_pohdx-pur_group = 'x'.
       ls_poit-po_item = '00010'.
       APPEND ls_poit to lt_poit.
       ls_poitx-po_item = '00010'.
       ls_poitx-po_itemx = 'x'.
       ls_poitx-material = 'x'.
       ls_poitx-plant = 'x'.
       ls_poitx-quantity = 'x'.
       APPEND ls_poitx to lt_poitx.
    CALL FUNCTION 'BAPI_PO_CREATE1'
       EXPORTING
         POHEADER                     = ls_pohd
        POHEADERX                    =  ls_pohdx
    *   POADDRVENDOR                 =
    *   TESTRUN                      =
    *   MEMORY_UNCOMPLETE            =
    *   MEMORY_COMPLETE              =
    *   POEXPIMPHEADER               =
    *   POEXPIMPHEADERX              =
    *   VERSIONS                     =
    *   NO_MESSAGING                 =
    *   NO_MESSAGE_REQ               =
    *   NO_AUTHORITY                 =
    *   NO_PRICE_FROM_PO             =
    *   PARK_COMPLETE                =
    *   PARK_UNCOMPLETE              =
    * IMPORTING
    *   EXPPURCHASEORDER             =
    *   EXPHEADER                    =
    *   EXPPOEXPIMPHEADER            =
      TABLES
        RETURN                       = return
        POITEM                       = lt_poit
        POITEMX                      = lt_poitx
    *   POADDRDELIVERY               =
    *   POSCHEDULE                   =
    *   POSCHEDULEX                  =
    *   POACCOUNT                    =
    *   POACCOUNTPROFITSEGMENT       =
    *   POACCOUNTX                   =
    *   POCONDHEADER                 =
    *   POCONDHEADERX                =
    *   POCOND                       =
    *   POCONDX                      =
    *   POLIMITS                     =
    *   POCONTRACTLIMITS             =
    *   POSERVICES                   =
    *   POSRVACCESSVALUES            =
    *   POSERVICESTEXT               =
    *   EXTENSIONIN                  =
    *   EXTENSIONOUT                 =
    *   POEXPIMPITEM                 =
    *   POEXPIMPITEMX                =
    *   POTEXTHEADER                 =
    *   POTEXTITEM                   =
    *   ALLVERSIONS                  =
    *   POPARTNER                    =
    *   POCOMPONENTS                 =
    *   POCOMPONENTSX                =
    *   POSHIPPING                   =
    *   POSHIPPINGX                  =
    *   POSHIPPINGEXP                =
    *   SERIALNUMBER                 =
    *   SERIALNUMBERX                =
    *   INVPLANHEADER                =
    *   INVPLANHEADERX               =
    *   INVPLANITEM                  =
    *   INVPLANITEMX                 =
    ENDFUNCTION.
    i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". 

  • Lock Object error during batch load

    Batch load was delayed about an hour. First error message in the Server Log said "Object is already locked by user""Error 1053010 processing request [Lock Object]-Disconnecting"Then it went through a series of "Object locked by user admin" and "received client request: create Temporary Object(from user admin)"It did this several times until connection.Although from time to time we have had problems with Objects getting locked and preventing maintenance in the Application Manager. This is the first time that is has prevented a batch load. Does anyone know what could have triggered this during the load process?

    This happened to us a lot, I think it's due to people opening objects, then letting their session time out, leaving a phantom lock.We solved the problem by calling the UNLOCKOBJECT function before any dimbuilds. 99.9% of the time this raises an error, "..object x is not locked..", but the rare time that the otl is inadvertently locked, it prevents the script from failing.<br><br>HTH,<br><br>Jeff McAhren<br>Dallas, Texas<br><br>ex to unlock the outline for app/db flash:<br><br>UNLOCKOBJECT 1, "FLASH" "FLASH" "FLASH"

Maybe you are looking for

  • I tried purchasing songs and it keeps saying my session has timed out

    I am trying to download songs and it keeps saying my session has timed out...how do i get aroudn this

  • Adobe Photoshop Elements serial number

    I bought Adobe Photoshop Elements from Amazon, but can't find the serial number. I have literally looked everywhere, and on the Adobe help pages. Please help!

  • No bookmarks in Reader 7

    We have a 250+ page document that was originally created with InDesign (CS2). I used Acrobat 8 (CS3) to add links and create bookmarks. The pdf was saved with the property to open with bookmarks and pages. Then, security was added. We would like the

  • Best way to handle scrolling on iphone?

    What's the best way to handle scrolling? The ios has a specific style of scrolling, click and drag, with a sort of elastic effect at the limits. What's the best way to appraoch this? Create a script that mimics this same behavior? In a related questi

  • PF Status and At line Selection

    Hi All, I need your help! I have used PF Status for my first screen display. Now I need to display a 2nd screen, new classical report which a line can  be selected  ( Double-Clicked ) and then a transaction can be displayed. How should I do this? Tha