Error log. Can anyone help me with time capsule??
Ok my problems started when I upgraded to Snow Leopard.
So today I tried again using an ethernet connection. Took ages to verify back up and then prepared for back up and then failed. Here is my log
Starting standard backup
Attempting to mount network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Mounted network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Running backup verification
QUICKCHECK ONLY; FILESYSTEM CLEAN
Backup verification passed!
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/TC01 MJM/Martin Murray’s MacBook Pro_0023df87b79e.sparsebundle mounted at: /Volumes/Backup of Martin Murray’s MacBook Pro
Backing up to: /Volumes/Backup of Martin Murray’s MacBook Pro/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
No pre-backup thinning needed: 59.50 GB requested (including padding), 349.98 GB available
Indexing a file failed. Returned 200 for: /Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin, /Volumes/Backup of Martin Murray’s MacBook Pro/Backups.backupdb/Martin Murray’s MacBook Pro/2010-07-25-152744.inProgress/7DAFB63C-32BA-4824-9546-AEFA2F7CC9E9/Macintosh HD/Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin
Aborting backup because indexing a file failed.
Stopping backup.
Copied 15 files (3.1 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Attempting to mount network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Mounted network destination using URL: afp://Martin%[email protected]/TC01%20MJM
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/TC01 MJM/Martin Murray’s MacBook Pro_0023df87b79e.sparsebundle mounted at: /Volumes/Backup of Martin Murray’s MacBook Pro
Can anyone help me please???
Thanks,
Martin
mjm81 wrote:
Indexing a file failed. Returned 200 for: /Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin
Time Machine is having a problem with that file. See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Similar Messages
-
TS3694 error 21 can anyone help me with this?
Can anyone help me with an error message i get with my iphone, it say error 21 after trying to restore the phone though itunes.
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time. -
hey i have ios 4.3.5 on my ipad and i wanna update it to ios 5.1.1 and ive downloaded the file made by apple but every time i try to update it to ios 5.1.1 it allways says error 3194. can anyone help?
alanangert1 wrote:
... every time i try to update it to ios 5.1.1 it allways says error 3194. ...
3194 = http://support.apple.com/kb/ts4451
If the above Support Article does not resolve it... then you have a problem.
Perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
Be sure to make an appointment first...
Note:
That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
Unauthorized modification of iOS...
http://support.apple.com/kb/HT3743 -
I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?
Run Disk Utility located in /Applications/Utilities before trying to upgrade to Lion in case the startup disk needs repairing.
Using Disk Utility to verify or repair disks -
Can anyone Help me with this message? We could not complete your itunes store request an uknown error occurred (-1201)?
You have to unplug your ipod and reload the page.
-
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
Can anyone help please with my Time Machine, I have been getting the following message The backup disk image “/Volumes/Mac Backup/Stephen Smith’s iMac.sparsebundle” is already in use.
See > http://pondini.org/TM/C12.html
-
i tried to resore my iphone 3GS with itunes but it is showing an error 29 , can anyone help me to sort out this problem
Try to restore get a error 29 - iPhone 3GS - iFixit
See if this helps. -
I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?
This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates -
I Want to buy diamonds for my tos game but it come out a message ask me to contact itune support. Can anyone help me with this? What should I do so that I can buy my diamonds?
You can contact iTunes support via this page and ask them why the message is appearing (on these forums we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption
-
Can anyone help me with process of moving only my pics and music (purchased and imported cds) from a old G5 to a new iMac. Thanks Dan
The easiest way is to connect the G5 and your new iMac together via Firewire. Then you can use what is called "Target Disk Mode" which basically makes the G5 look like an external hard drive to your iMac. The potential gotcha is if your new iMac does not have a Firewire port. In that case, you need to get the Apple Thunderbolt-Firewire adapter in order to connect the two machines (as far as I know, all G5's had one or more Firewire ports). I have done this many times, it's easy and works perfectly.
Alternatively, you could connect both Macs to the same network and log into the G5 from your iMac. This involves going into System Preferences > Sharing on the G5 and turning on File Sharing and then logging in from your iMac to the G5 as if it were a server. (Logging in through the Finder or via Go > Connect to Server). This also works fine but it's a little more involved than using Target Disk Mode. I do this all the time and it too works fine.
Either way, once the two Macs are connected, you will use the Finder on your iMac to copy files/folders from your G5 the same as you would from any external hard drive. Regarding iTunes, you could just copy your entire iTunes library over to your iMac being careful to put it in the same relative folder location: /users/yourusername/Music/iTunes This method will preserve your playlists and album art. Alternatively you could go into iTunes and do Add to Library but I'm not completely sure doing it that way will bring over your album art and it certainly won't bring over your playlists.
I see no reason to use a separate external hard drive. It will just double the time it takes to transfer your files because you would first have to copy everything to the hard drive, then in a second step copy everything from the hard drive to your iMac.
Note: In all cases there is the possibility that you may need to change file & folder permissions on the things you copy over so you can access (read & write) to these folders & files once copied to your new iMac. This is not a difficult process.
Maybe you are looking for
-
Upgrade of CR 2008 to CR for MS VS is possible
Using license of "Crystal Reports 2008", can we upgrade "SAP Crystal Reports, Developer Version for Microsoft Visual Studio"? Or do we have to purchase "SAP Crystal Reports, Developer Version for Microsoft Visual Studio" separately even though we hav
-
Firefox opens on a tab closed several days ago, which I cannot seem to delete
I searched for and opened a tab from Skype on Saturday, 1/15/11 and now whenever I open Firefox, the tab magically reappears. I keep closing it, but it keeps reopening with that specific date on other tabs which were open when I closed Firefox. How t
-
All DMG files "device not configured"??
Alright, this just did start happening. All the dmg files that i try to open, i get the same error. A warning box comes up, and it says, "The following disk images failed to mount" Then it lists the name of the device, example..."vlc-0.8.5.dmg"...and
-
5500 Series WLC internal DHCP Server - Exclusion?
Hi there, We're using the internal DHCP server on our 5500 Series WLC which works fine. However on one WLAN we ran out of addresses so changed the subnet from a /25 to a /24. The problem is that the router/gateway is still in the middle (124/125/126)
-
How could I start a portal application within a DynPage ? Thanks for any feedback or/and help Regards. Altafin