Error Log showing Line Items missing in APP Cheque Printing

Hi
Am working on APP Cheque Printing... i hav run here the F110 Steps ..Spool is also generated ...everything is cuming correct...but in spool one error log is also generated as below :
Error log
F0251 In form YCHEQUE_NEW1 / window MAIN , the element 525 (Line items) is missing
F0253 Output of the relevant forms is defective
YCHEQUE_NEW1 -> The Cheque Print Script . In my Cheque Output i dont want to display the Line Items ..That's why in Script i hav deleted all the coding under the element 525 which displays Line Items data....
then am getting this error log ..
Please let me know how to solve this problem..
Thanks in Advance
SATYA

Hi,
Just comment the code which is present in that text element or remove the code.
Do not comment text element(i.e Empty text element).
/E 525 "Do not remove or comment this line
*Comment all code
Edited by: Anil Mane on Sep 12, 2008 8:41 AM

Similar Messages

Error: FF805 Tax statement item missing for tax code

Hi all,
We are getting an error when releasing billing document to accounting in 4.7system.
Error: FF805 Tax statement item missing for tax code O0
No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
parameters by the application to the Accounting interface.
Please give your inputs and will be rewared.
Quick reponse will be appreciated.
Thanks & Regards.

Dear Mehak,
I am sorry for the late reply, but I started (in fact) to work in SDN Forum this year, even I entered earlier.
We have many FF805 errors reported by customers and the same solution has resolved the problem. Please note that the SD-FI interface changed from earlier releases. The note 400766 eplxains the checks made.
So it is possible that now you get error message FF805, when in an earlier release you didn't get it, eventhough no customizing change.
Please review note -> 392696   R/3 Tax Interface Configuration Guide
However please note => In the vast majority of cases, error FF805 occurs because of an error in your pricing procedure. The attached note 112609 explains in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no tax line with tax indicator XX, then the error FF805 issues, and it is justified. => Please check these informations.
-> EXAMPLE
   If tax condition MWST has base amount zero and value zero; for this reason it is not passed to accounting. But, according to the criteria reported by note 112609, its tax indicator EG: A7
   has been assigned to the condition EG: ZBR1.
   So in accounting there would be a revenue line with tax indicator A7, but there isn't any tax line with indicator A7 (because MWST doesn't pass to FI). The note 400766 states situation is unallowed, and error FF805 is justified.
IMPORTANT: Just a hint, any issue with FI, kindly report in the forum:
Expert Forums - SAP Solutions - ERP Financials
There you will find a lot of people that works with FI and can help you with future issues, including me
I hope I could help you
Kind Regards,
Vanessa Barth.

Remittance challan creating-error no tax line item

hi
while creating remitance challan it showing error '' no tax line item exist''
tax line item showing open item that too i have posted in last month first1.8.2008.to day i am creating challan but it is showing that error
thank you
sowmya

Hi
I hope you've checked the business place entered in J1INCHLN. If yes, then check what is the recepient type filled in your Vendor masters ? May be the recepient type you are typing in J1INCHLN is different from that of the vendor master
regards
Parag Bhargava

FI Archiving - System error: Customer/vendor line item not on OI basis

While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
Shailesh

Hi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi

Error: FF805 Tax statement item missing for tax code O0

Hi Gurus
We are working in Upgrade Project 4.6C to ECC 6
We are getting an error when releasing billing document to accounting in ECC 6 System.
    Error: FF805 Tax statement item missing for tax code O0
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of
    parameters by the application to the Accounting interface.
This issue occurs in both DEV and QA2.
Please give your iputs and will be rewared
Thanks and Regards,
Sateesh.K

hi,
The problem may be due to missing authorizations.
Please looking into the note 780589 and 188200.
Hope this might be of some help.
Regards,
Imran

New error message :duplicate line item

Hi,
We have to add a new error message so that when we try to add a duplicate line item in our qty contract
1. we should not be allowed
2. we should get a error message u201Cduplicate line item not allowedu2019
How to achieve this
Thanks
Arun

Search this forum for "USEREXIT_SAVE_DOCUMENT" and "USEREXIT_SAVE_PREPARE".

Sap standard report for showing line items of any GL with its offsettinga/c

Dear all,
Is there any standard report in SAP to show line items of GL with its offsetting accounts. in short i want to see all journal entries of one specific GL account.could any of you help me in this?
points will be rewarded for the relevant answer.
thanks,
hemanth

Hi Dave,
I have gone through the note 112312.But there it is mentioned that it relates to 4.6x versions.We are in ECC 6.0.and we have not implemented new GL accounting concept.Is there any other alternative functionality or any other OSS note which meets my requirements.Can you please suggest me on this ?
Thanks,
Hemanth

What are criteria of F-44 to show line item or not show?

Hello all,
I had reversed mm doc (from migo) with mr8m then I used f-44 for clear vendor account.
The fi doc that occured had no line item, please tell me how to know what criteria of situation that show or not show line item in fi document.
Thanks for advance,
Fon

Hi,
I have the similar case but opposite of that. When I use F-44 to clear vendor line items, it generates line itmes but I dont want system to generate it.
Kindly let me know the setting or criteria for the same.
Regards,
Niraj

Error: No Actual Line item were selected (Message No. KB420)

Hi All,
I have created order in KO01 and posted the transaction in F-02. And assigned the same order in KH01.
And, now i am trying to Actual cost of line items for order in KOB1, i am getting below error
"Error: No Actual Line item were selected (Message No. KB420)"

HI,
Thank you for the reply.
Madce necessary changes internal order and assigned the correct cost element.
issue got resolved. Thank you

One line item missing from PO created using Shopping cart

Hello Team, we have raised a shopping cart with 6 line items, having the same vendor and account assignment details. Once the shopping cart was approved the PO was created but the 3rd line item was missing in the PO. When we checked in BBP_PD, the 3rd line item is still showing as item in transfer process. Can anyone please throw some light to this issue. All the line items were approved.
Thanks.
Richa

Hi Richa,
Is there any error in RZ20 for that shopping cart?
Best Regards,
Bharathi

FS10N GL Balances not showing line item details

Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledger

Big hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards!

TDS Line Item missing in J1INCHLN

Dear All,
Tds line item (194C) in some cases of MIRO invoice like asset PO or in service PO , getting missed in J1INCHLN. What may be the reasons because this is statutory requirement. We are not able to find out the actual tds amount which we have to submit.
Pl any body help me
Thanks,
Dharmveer

Dear Alok,
You are right. This is standard requirement of business place and recipient type in vendor master data for tds line items to be appeared in J1INCHLN.
My issue is so specific , here we have already business place and recipient type maintained.
However is missing in J1INCHLN.
It happens specially in MIRO Invoive of asset PO and service PO.
Here for 194C , base line item not coming in J1INMIS and Surcharge line item not showing in J1INCHLN
i.e
tds Base:Coming in J1INCHLN but not in J1INMIS
tds ecess: Showing in both report, J1INMIS & J1INCHLN
tds hecc: Showing in both report, J1INMIS & J1INCHLN
tds surcherge: Coming in J1INMIS but not in J1INCHLN
May be some problem when we make miro of asset PO , system is not able to transfer in different tds table..
Pl give some specific answer.
Thanks in Advance
Dharmveer

ICR Process 2 - Line Item Missing from Reconciliation Step FBICR2

Dear Experts,
I am very close to process 002 working well. I have a scenario I am hoping you can help with:
1. I posted two intercompany documents
(Screenshot of Both Documents Here: http://img139.imageshack.us/img139/7264/documentsposted1of2.png)
2. Data Assignment and Reconcilation is run and three of the line items are automatically assigned, the forth is missing
(See screenshot here: http://img412.imageshack.us/img412/7334/missing4thlineitem2of2.png)
Note: The missing item appears in List of Total Documents and List of Records in the auxilary programs
Where is the $14USD debit to G/L Account 'IC Rev'? Any insight would be greatly appreciated.
Thanks,
John Scime
+1-716-803-4920

If I unassign the line it only appears in the hierarchy tree undor Company 10 /TP 20 and on the Company 10 unassign box in the dashboard.
If I go to the hieracy tree under Company 20/TP10 the other half of the document is there under Company 10 unassign box in the dashboard.
This is strange because both records will not show up on a single screen and therefore (ie. one record on the Company unassigned box and the other in the TP unassign box), they cannot be manually assigned.
Any ideas how I can bring there screens together (Ideally Auto-matching, but Ill take anything at this point)
Thanks

Error in ABUMN: Line Item Schema SAP_RET_XX0 is not defined

Hello Guru,
I have one problem when doing asset transfer (ABUMN) within same company code, because we want to drop some of depreciation areas. And in the new asset those depreciation areas are not existing. When I was trying to run ABUMN and simulate, the error came. Message no AC598 "Line Item Schema SAP_RET_XX0 is not defined". I tried to look in OSS Note, I found that error but the solution is for 4.0 while we are using 4.7 already but still the error is happening.
Please share whether you ever faces the error like this before.
Thanks in advance.
Kind regards,
Dodi

Hi,
Please refer to Note 703302 - Error AC 598 SAP_RET_RU0 is missing if it helps.
Summary
Symptom
Message AC 598 "Line item schemes are not found." is issued when trying to create assets postings with activity types 230, 300.
Other terms
SAP_RET_RU0 SAP_RET_RU1
Reason and Prerequisites
Line items schemes SAP_RET_RU1, SAP_RET_RU0 are incorrect. This is an error in the standard delivery for Russia.
Solution
Delete two records in the table T093H using transaction SE16 with the following data: LAND1 GLAFABER BWASL BUZSM
RU * 230 SAP_RET_RU1
RU * 300 SAP_RET_RU0
Header Data
Release Status: Released for Customer
Released on: 03.02.2004 14:58:55
Priority: Recommendations/additional info
Category: Customizing
Primary Component: XX-CSC-RU-FI Financial Accounting
Secondary Components: XX-CSC-RU Russia
Releases
Release Independant

Posted Accounting documents not showing line items

Hi!
I facing a problem that has been created during the posting of accounting documents.
The Problem:
A Number of accounting documents were posted but there are no entries for them in BSIS, where as the header exists in BKPF and the detail exists in BSEG. So although it is showing the document as posted. It is not reporting it against the relevant G/L Account. Since cheques have already been issued against these documents, we are trying to avoid a reversal of these documents.
Our Analysis of the problem
We think that the problem has arose due to an error in the master data of G/L Account.
Some new G/L Accounts were created and the person creating it forgot to check the 'Line Item Display' Check in fs00->Control Data Tab.
New Documents were meanwhile created with line items using these G/L Accounts and were then posted.
When the mistake was realized the 'Line item Display' was checked for these Accounts. This however occured after the documents were posted.

Ashan,
1) entries come only in BSIS/BSAS when Field "Indicator: Open Item Management" = X (SKB1-XOPVW)
2) For line item display, the system stores an entry per line item in an index table which contains the link between line item and account.
-> I think you've to run a "correction-program" but
plz only in agreement with SAP (OSS)
Andreas

Error Log showing Line Items missing in APP Cheque Printing

Similar Messages

Maybe you are looking for