Error Log: The Billing Type Could Not Be Determined
Hi Experts
I have to produce the credit note sebsequent to the return. But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined". Kindly help me with the solutions
Thanks and Regards
M.Dheerendar Jain
Hi,
Please check copy control VTFL for delivery and billing type
go through the routine 350 (VAT Determination) whteher it is applied in ite category.
if yes, then you have to configure the VAT Invoice type determination.
also maintain the entries in below tables:-
J_1IDCLSDET & J_1IBILDET
Even if the above entries are already maintained then check the supplying and receiving plant entries
for the billing.
To maintain entries in table go to t-code SM30.
and put the above table in the "Table/View" it helps to determine FVAT Invoice types
Invoice types determined based on supplying and receiving plant.
Kinldy check and confirm.
Thanks & Regards,
Rahul Verulkar
Similar Messages
-
The billing type could not be determined" .
Hi All,
When i am excuting bap BAPI_BILLINGDOC_CREATEMULTIPLE i by passing ref_doc its giving error that "The billing type could not be determined" .
Is i have to pass something else.
Regards,Can you tell how did you resolve this?
I'm getting the same situation and have no idea
Thanks in advance. -
IDoc type could not be determined for the IDoc
I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
NarayananHi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra -
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
Hi I cant install the Management Console.
I keep getting
Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
Has someone come across this problem before?
I am using
MS Server 2008 Std x86
SQL Server 2005 SP2 Std x86
MDOP 2008 R2
APP-V 4.5
Please can someone help.
ThanksI'm running into the same problem myself, I have an almost identical setup.
Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
1
[2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''.
2
[2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033. Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''.
3
[2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''.
4
[2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff.
5
[2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\
6
Copyright (c) Microsoft Corporation. All rights reserved.
7
8
Description:
9
This script creates all user-defined messages.
10
11
The types of messages allowed (and their severities) are:
12
FATAL - SQL Server Severity = 17; ours = 1
13
ERROR - SQL Server Severity = 16; ours = 2
14
WARNING - SQL Server Severity = N/A; ours = 3
Can anyone help me shed some light on what's going on here? -
IDoc type could not be determined for the IDoc in F110
Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
RegardsIf you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition. -
Error: "Transaction type could not be determined" during PO Creation fromSC
Hi all,
I'm working on SRM 5.5 with ECS.
During the creation of a PO I want to add a SC as an item of PO.
But when I chose the SC and click on the button Add to PO I recive the error:
Transaction type could not be determined
In the organizational unit I set the attribute BSA and DP_PROCT_TY.
there are other steps I have to do to join the transaction type of SC and PO?
rgs
enzoHi Enzo,
First check if the attribute BSA and DP_PROC_TY have the same value.
Then in the attribute value for BSA, change the source system for the document type to your SRM system.
Create a new PO and a shopping cart.
Try changing the PO by adding the shopping cart
Hopefully your problem may get resolved.
Thanks
Sanjeev -
I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.
Error (10698)
The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.
Recommended Action
Check the cluster configuration and then try the operation again.
Information (11037)
There currently are no network adapters with network optimization available on host.
The host properties indicate network optimization is available as indicated in the screen shot below.
Any guidance on things to check is appreciated.
Thanks,
GlennHere is a snippet of the cluster log when from the current VM owner node of the failed migration:
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine Configuration VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine Configuration VMNameHere', gen(0) result 0/0.
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.000020ec::2014/02/03-13:16:07.495 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: Current state 'MigrationSrcWaitForOffline', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: State change 'MigrationSrcWaitForOffline' -> 'Online'
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: Current state 'MigrationSrcOfflinePending', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: State change 'MigrationSrcOfflinePending' -> 'Online'
00000e50.00002080::2014/02/03-13:16:07.510 ERR [RES] Virtual Machine <Virtual Machine VMNameHere>: Live migration of 'Virtual Machine VMNameHere' failed.
Virtual machine migration operation for 'VMNameHere' failed at migration source 'SourceHostNameHere'. (Virtual machine ID 6901D5F8-B759-4557-8A28-E36173A14443)
The Virtual Machine Management Service failed to establish a connection for a Virtual Machine migration with host 'DestinationHostNameHere': No connection could be made because the tar
00000e50.00002080::2014/02/03-13:16:07.510 ERR [RHS] Resource Virtual Machine VMNameHere has cancelled offline with error code 10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] HandleMonitorReply: OFFLINERESOURCE for 'Virtual Machine VMNameHere', gen(0) result 0/10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] Res Virtual Machine VMNameHere: OfflinePending -> Online( StateUnknown )
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] TransitionToState(Virtual Machine VMNameHere) OfflinePending-->Online.
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::VetoOffline: (VMNameHere with flags 0)
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::RemoveGroup: (VMNameHere) GroupBeingMoved: false AllowMoveCancel: true NotifyMoveFailure: true
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] VMNameHere: Removed Flags 4 from StatusInformation. New StatusInformation 0
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmGroup::CancelClusterGroupOperation: (VMNameHere)
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GUM] Node 3: executing request locally, gumId:3951, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] moved 0 tasks from staging set to task set. TaskSetSize=0
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmPriorityManager::StartGroups: [RCM] done, executed 0 tasks
00000b6c.00000dd8::2014/02/03-13:16:07.510 INFO [RCM] ignored non-local state Online for group VMNameHere
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GUM] Node 3: executing request locally, gumId:3952, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000018e4::2014/02/03-13:16:07.526 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
No entry is made on the cluster log of the destination node.
To me this means the nodes cannot talk to each other, but I don’t know why.
They are on the same domain. Their server names resolve properly and they can ping eachother both by name and IP. -
I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
ThanQ SO very much!
[email protected] or [email protected] or [email protected] .
You can also find me on Facebook, my given name is Tiffinie Trimmer, &
that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
as marking this page in my FAVORITES so I can find it fast! Take Care!!!I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
Error:The grouping element could not be determined for project
Hi,
When I am trying to issue goods for a project,I am getting the following error
"The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
what may be the reason for this reason.
Regards,
RajuHi,
You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
Muzamil -
I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix it?
Have you moved or deleted those tracks on your computer (the gift card has got nothing to do with it) ?
You might be able to re-download them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes (re-downloading isn't possible in all countries) - if those songs appear there then delete the entries from your iTunes library (where you are clicking on them to play them and gettinf the 'original file' error), and they should then get a cloud symbol against them for re-downloading.
If they don't appear in that link then have you got them on, for example, an external drive ? -
Top Link error 17002 The Network Adapter could not establish the connection
I have installed an application developped in an another environnement.
I have created the database schema in my own database.
I have created a database connection to this schema.
I have reconciled the schema using this connection (so the database and the connection are available and correct from jdeveloper)
I have updated the Mapping to use the new connection and new generated the mapping status report without any errors
and i still have this error ! The Network Adapter could not establish the connection when i access any jsp document containing data from the database.
I check and recheck everything and all is correct ... sure something is wrong somewhere ... where is the question ...Sorry I think you didn't read the thread or you read it too fast !
I'm not a beginner and I know what the problem is but all the settings are correct in jdev and the database and the listener are running ... i'm able to browse the tables, seeing data reconciling objects with the database connection referenced in the top link descriptor
It seem that top link is using something else and i don't understand from where it took the connection description. -
Boot camp 4, When download win7 support software problem " The operation couldn't be completed.(kSMErrorDomainLaunchd error 6 -The specified job could
not be found.) And unable to download "Can'tinstall Windows Support Software because it is not current available from the Software Update server.First try changing your network settings for the interface it uses and disable auto proxy setting.
It is a configuration issue. And yes it could all be "solved" with a simple 600MB direct download link in under 10 minutes. -
SAPMMC -Error 126 = "The specified module could not be found."
Hi,
Finally i could install SAP Netweaver 2004s ABAP Trial version. But when i get started SAP Systems at SAPMMC, process List , the dispatcher does not work properly:
Thu Mar 22 08:19:14 2007
ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 1468
Does anybody know this problem?
Thx!!Hello,
could it be that the disp+work.exe starts and then ends after a few seconds? I've had the same problem some days ago. Finally after 5 reinstallations and one new Windows installation, all works fine.
So maybe you could answer some questions
<b>Have you installed the MS Loopbackadapter or are you connected to a network?</b>
You need the MS Loopback if you aren't connected to a network.
<b>How is the size of your virtual memory?</b>
Should be great enough: 4096MB works fine.
<b>What's the name of your computer?</b>
Shouldn't be more than 13 characters.
Maybe this will help.
Michael
Maybe you are looking for
-
No longer connect to my network automatically
I've always been automatically connected to my AE network when logging on to my acount or waking up from sleep while logged on but that's no longer true anymore. I now have to select the network from the airport icon in the menu bar. I'm not prompted
-
When I'm signing up for my ID number is it for a new business or for banking purposes
I'm in the process of signing up for a federal ID number and it is asking me if I am getting the number for "starting a new business" or "banking purposes". Since it's a requirement to sell an Ibook in itunes, which is it? Banking or starting a busin
-
How to give ( u00F7 ) symbol in content conversion.
Hi Experts, I need to use division symbol as field separator/delimiter in XI content conversion. Could nay one help me to find an option to do this? I need the ( ÷ ) symbol in the target side payload, can any one suggest how to do it..? Heres how yo
-
Rounding to the nearest thousand
hi does anybody know how to ceil and floor an integer to the nearest thousand? thanks in advance?
-
EJB(Entity -BMP) - casting error, lost for a solution
Evening all. I am currently working with EJB's. I am having difficulty with casting to my entity beans' home interface and can see not reason for the casting exception. I have spent the best part of two days trying to get these dam beans working and