Error logfile

dear all,
             i m a newbie i need your precious help.we have r12 apps last night  application server shutdown suddenly  but db was up and running.i want to find why applications server shutdown,where do i get  information regarding why applications shutdown suddenly and for what reason ? . we have alert logfile in db is there any logfile in r12 which records all applications activities? thanks in advance.
os:rhel6
ebs:r12(12.1.3)
thanks.

Hi Anand,
              Tried,as per the instructions you have given
"Have error in and error out in that module and inside use a case structure and pass the error wire to the case selector  and in the error case write all the error cluster."
please specify how the above can be done?Where should we write the error comments.Is the error code will appears automatically.What all will be the connectors in this subVI??
Thanks as kudos only
Attachments:
error logfile.vi ‏11 KB

Similar Messages

  • Can run no apps on 3G unit and see no media - error logfile linked - help

    After a crash in Mobile Safari, I my iPhone 3G saw no songs, videos, podcasts on the device any longer and no 3rd party apps would run.
    I restored several times (factory restore) to no avail. Went to Apple and they gave me a new phone. As soon as I synced it - in the same boat. No 3rd party apps run and I see no media on the device despite sync.
    See my error longs from OS X console:
    http://blakespot.com/iphonesyncerrors.txt
    The repeated error within is:
    8/19/08 8:02:01 AM [0x0-0x25025].com.apple.iTunes[280] MobileDevice: AMDeviceCopyValue: There was an error getting the value from lockdown
    8/19/08 8:03:59 AM [0x0-0x25025].com.apple.iTunes[280] MobileDevice: AMDeviceCopyValue: There was an error getting the value from lockdown
    8/19/08 8:04:50 AM [0x0-0x25025].com.apple.iTunes[280] MobileDevice: AMDeviceCopyValue: There was an error getting the value from lockdown
    What must I do to rectify this situation. Obviously somehing on the iTunes side is corrupted, I assume due to the first sync after that massive Safari crash on the device.
    I can't be the only one that's experienced this, right?
    blakespot
    Message was edited by: blakespot

    I've been having this problem for over a week, and I believe after much reading about it that the problem is iTunes 7.7.1. Last night I downgraded to iTunes 7.7 and so far so good. The issue seems to be with some bug in iTunes 7.7.1 DRM checking. Upgrading to FW 2.0.2 (which I have not done yet) seems to be a quick way to trigger that bug. There are tons of threads, but here's a summary thread:
    http://discussions.apple.com/thread.jspa?threadID=1660986

  • Error logfile in r12

    dear all,
                  i m a newbie i need your help,my r12 application server suddenly shutdown and i want to check the reason why it is shutdown suddenly but i dnt know where i should check  in which logfile and where it is located? .your help appreciated.thanks in advance.
    regards,

    Caused by: java.lang.Exception: RC-50007: Could not create cloning stage area at /protest/appluat/apps/apps_st/comn/clone/
    Raised by oracle.apps.ad.clone.util.CreateCloningStage
    at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:147)
    at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:108)
    at oracle.apps.ad.clone.util.CreateCloningStage.<init>(CreateCloningStage.java:93)
    at oracle.apps.ad.clone.StageAppsTechStack.doStage(StageAppsTechStack.java:266)
    at oracle.apps.ad.clone.StageAppsTechStack.<init>(StageAppsTechStack.java:252)
    at oracle.apps.ad.clone.StageAppsTier.<init>(StageAppsTier.java:206)Did you try to run the command as suggested by Helios?
    Do you meet all the software requirements as per the Rapid Clone doc?
    Please implement the steps under "Section 3: Before starting to clone" section in (Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]) and try then.
    Thanks,
    Hussein

  • Error while trying SSL on OHS

    I'm getting "Init: SSL call to NZ function nzos_OpenWallet failed with error 29248" error in log file HTTP_Server~1 while starting OHS (using opmnctl startall).
    I created a Wallet with auto login option checked. I was able to create certificate Request and got a certificate from verisign (14 days Validity). I imported Root certificate and intermediate certificate from verisign into the wallet and then successfully imported the trial certificate. After saving the wallet in default location I got 2 files (cwallet.sso and ewallet.p12) there.
    Configuration in opmn.xml is :
    <ias-component id="HTTP_Server">
    <process-type id="HTTP_Server" module-id="OHS">
    <environment>
    <variable id="PERL5LIB" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread;$ORACLE_HOME\perl\5.8.3\lib;$ORACLE_HOME\perl\site\5.8.3\lib"/>
    <variable id="PHPRC" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\conf"/>
    <variable id="PATH"
    value="$ORACLE_HOME\Perl\5.8.3\bin\MSWin32-x86-multi-thread" append="true"/>
    </environment>
    <module-data>
    <category id="start-parameters">
    <data id="start-mode" value="ssl-enabled"/>
    </category>
    </module-data>
    <process-set id="HTTP_Server" numprocs="1"/>
    </process-type>
    </ias-component>
    my httpd.conf file is as follows:
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/srm.conf and then D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "D:\product\10.1.3\OracleAS_1\Apache\Apache" will be interpreted by the
    # server as "D:\product\10.1.3\OracleAS_1\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module modules/ApacheModuleDigest.dll
    LoadModule expires_module modules/ApacheModuleExpires.dll
    LoadModule headers_module modules/ApacheModuleHeaders.dll
    LoadModule proxy_module modules/ApacheModuleProxy.dll
    LoadModule speling_module modules/ApacheModuleSpeling.dll
    LoadModule status_module modules/ApacheModuleStatus.dll
    LoadModule info_module modules/ApacheModuleInfo.dll
    LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
    LoadModule perl_module modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
    LoadModule php4_module modules/ApacheModulePHP4.dll
    LoadModule onsint_module modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    #AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_php4.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName IFLMUD5DLHY4G.i-flex.com
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks MultiViews
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
    UserDir "D:\product\10.1.3\OracleAS_1\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /icons/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\icons/"
    Alias /javacachedocs/ "D:\product\10.1.3\OracleAS_1\javacache\javadoc/"
    <IfModule mod_perl.c>
    Alias /perl/ "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin/"
    </IfModule>
    <Directory "icons">
    Options MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin/"
    # "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    AddType application/x-httpd-php .php .phtml
    AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost IFLMUD5DLHY4G.i-flex.com IFLMUD5DLHY4G
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    # Required for cgi perl scripts that are run from /cgi-bin/.
    SetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin/"
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    SetHandler fastcgi-script
    <IfModule mod_ossl.c>
    SSLOptions +StdEnvVars
    </IfModule>
    </Directory>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\oracle_apache.conf"
    my ssl.conf is as follows:
    <IfDefine SSL>
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First either `none'
    # or `dbm:/path/to/file' for the mechanism to use and
    # second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache dbm:logs\ssl_scache
    #SSLSessionCache shmht:logs\ssl_scache(512000)
    SSLSessionCache shmcb:logs\ssl_scache(512000)
    # SessionCache Timeout:
    # This directive sets the timeout in seconds for the information stored
    # in the global/inter-process SSL Session Cache. It can be set as low as
    # 15 for testing, but should be set to higher values like 300 in real life.
    SSLSessionCacheTimeout 300
    # Semaphore:
    # Configure the path to the mutual explusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex sem
    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog logs\ssl_engine_log
    SSLLogLevel warn
    ## SSL Virtual Host Context
    # NOTE: this value should match the SSL Listen directive set previously in this
    # file otherwise your virtual host will not respond to SSL requests.
    # Some MIME-types for downloading Certificates and CRLs
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    ## SSL Support
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    # NOTE: if virtual hosts are used and you change a port value below
    # from the original value, be sure to update the default port used
    # for your virtual hosts as well.
    Listen 443
    <VirtualHost IFLMUD5DLHY4G.i-flex.com:443>
    # General setup for the virtual host
    DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
    ServerName IFLMUD5DLHY4G.i-flex.com
    #ServerAdmin [email protected]
    ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    TransferLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200"
    Port 443
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
    # Server Wallet:
    # The server wallet contains the server's certificate, private key
    # and trusted certificates. Set SSLWallet at the wallet directory
    # using the syntax: file:<path-to-wallet-directory>
    SSLWallet D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.wlt\default\ewallet.p12
    #SSLWalletPassword iflex2007
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath conf\ssl.crl
    #SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional and require
    SSLVerifyClient optional
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
    <Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    SetEnvIf User-Agent "MSIE" nokeepalive ssl-unclean-shutdown
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/ssl_request_log 43200" \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    </IfDefine>
    Please help me rectifying this error.
    Thanks a lot in advance.

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Apache server + mod_python - Error 403

    Hi.
    I'm totally new in Apache server. As topic says, I have problems with permissions to my server directory. Here's my httpd.conf file:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd/"
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule python_module modules/mod_python.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    <Directory /home/developer/www/>
    AddHandler mod_python .py
    PythonHandler mptest
    PythonDebug On
    </Directory>
    httpd-userdir.conf file:
    # Settings for user home directories
    # Required module: mod_authz_core, mod_authz_host, mod_userdir
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received. Note that you must also set
    # the default access control for these directories, as in the example below.
    UserDir public_html
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    <Directory "/home/developer/www/">
    AllowOverride FileInfo AuthConfig Limit Indexes
    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    Require method GET POST OPTIONS
    </Directory>
    and path permissions
    drwxr-xr-x 4 root root 4096 03-16 12:24 home
    drwx-----x 11 developer users 4096 03-18 21:03 developer
    drwxr-xr-x 2 http http 4096 03-18 21:50 www
    -rwxrwxrwx 1 http http 137 03-18 21:08 mptest.py
    Do you have any suggestions? Thanks in advance

    Thanks for reply
    I've added read access to developer directory:
    drwxr--r-x 11 developer users 4096 03-18 21:03 developer
    Nothing changed.
    error_log
    [Tue Mar 18 22:42:47.462658 2014] [authz_core:error] [pid 2150:tid 2941197120] [client 192.168.1.100:56103] AH01630: client denied by server configuration: /home/developer/public_html
    No idea how "public_html" get there?!
    access_log
    192.168.1.100 - - [18/Mar/2014:22:38:34 +0100] "GET /~developer HTTP/1.1" 403 1081
    192.168.1.100 - - [18/Mar/2014:22:38:45 +0100] "GET /~developer/www HTTP/1.1" 403 1081
    192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /~developer/www HTTP/1.1" 403 1081
    192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /favicon.ico HTTP/1.1" 404 1099
    192.168.1.100 - - [18/Mar/2014:22:42:47 +0100] "GET /favicon.ico HTTP/1.1" 404 1099
    EDIT
    Ok, I've found the solution for that. In file httpd-userdir.conf UserDir was "public_html" instead of "www".
    Now I'm getting error 500
    error_log
    [Tue Mar 18 22:48:36.841443 2014] [mpm_event:notice] [pid 2803:tid 3074947456] AH00489: Apache/2.4.7 (Unix) mod_python/3.5.0- Python/3.3.5 configured -- resuming normal operations
    [Tue Mar 18 22:48:36.841528 2014] [core:notice] [pid 2803:tid 3074947456] AH00094: Command line: '/usr/bin/httpd'
    [Tue Mar 18 22:48:45.873329 2014] [:error] [pid 2805:tid 3033516864] make_obcallback: could not import mod_python.apache.\n
    [Tue Mar 18 22:48:45.874559 2014] [:error] [pid 2805:tid 3033516864] make_obcallback: Python path being used "['/usr/lib/python33.zip', '/usr/lib/python3.3', '/usr/lib/python3.3/plat-linux', '/usr/lib/python3.3/lib-dynload', '/usr/lib/python3.3/site-packages']".
    [Tue Mar 18 22:48:45.874589 2014] [:error] [pid 2805:tid 3033516864] get_interpreter: no interpreter callback found.
    [Tue Mar 18 22:48:45.874612 2014] [:error] [pid 2805:tid 3033516864] [client 192.168.1.100:56122] python_handler: Can't get/create interpreter., referer: http://192.168.1.108/~developer/
    Last edited by maci3k (2014-03-18 22:37:32)

  • 403 Forbidden Error on directory but not on index page.

    I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
    httpd.conf
    condensed:
    ServerRoot "/etc/httpd"
    Listen 80
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_core_module modules/mod_authz_core.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule env_module modules/mod_env.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
    LoadModule unixd_module modules/mod_unixd.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule php5_module modules/libphp5.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    <IfModule unixd_module>
    User http
    Group http
    </IfModule>
    ServerAdmin [email protected]
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    <Directory "/srv/http/owncloud">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    <Files ".ht*">
    Require all denied
    </Files>
    ErrorLog "/var/log/httpd/error_log"
    LogLevel warn
    <IfModule log_config_module>
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    CustomLog "/var/log/httpd/access_log" common
    </IfModule>
    <IfModule alias_module>
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    </IfModule>
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    TypesConfig conf/mime.types
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    </IfModule>
    Include conf/extra/httpd-mpm.conf
    Include conf/extra/httpd-multilang-errordoc.conf
    Include conf/extra/httpd-autoindex.conf
    Include conf/extra/httpd-languages.conf
    Include conf/extra/httpd-userdir.conf
    Include conf/extra/httpd-default.conf
    Include conf/vhosts/itiest.com
    Include conf/extra/php5_module.conf
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    Include conf/extra/httpd-ssl.conf
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    Include conf/extra/owncloud.conf
    With Comments:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd"
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
    #LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule php5_module modules/libphp5.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # AllowOverride FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Require all granted
    </Directory>
    <Directory "/srv/http/owncloud">
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    ## vhosts
    Include conf/vhosts/itiest.com
    Include conf/extra/php5_module.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    Include conf/extra/owncloud.conf
    ##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
    $  ls -al /srv/http/
    total 16876
    drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
    drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
    -rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
    drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
    -rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
    -rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
    -rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
    # groups http
    wheel http
    Last edited by johan1391 (2015-03-07 04:11:12)

    /var/log/httpd/owncloud-error.log
    192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
    192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
    192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
    $ ls -al /usr/share/webapps/
    drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
    drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
    drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
    drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
    drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
    Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
    Last edited by johan1391 (2015-03-07 19:03:19)

  • File does not exist: /java/classes message in Apache error log file

    I am getting several of these messages in the Apache error logfile.
    File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)
    Is it normal to see this messages or some configuration is wrong?
    thanks,
    Azodpe

    Please post the details of the application release, database version and OS.
    I am getting several of these messages in the Apache error logfile.
    File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)Is this the complete error message?
    Is it normal to see this messages or some configuration is wrong?If your application is functioning properly with no issues, then you can ignore those errors.
    Thanks,
    Hussein

  • 403 error after installing SuPHP

    Hi all,
    I've installed SuPHP on  my machine to develop website locally. However, When I visit either my localhost or a virtualhost on my machine I get a 403 forbidden error.
    I have checked my permissions and they are ok.
    However, I have PHP myadmin installed and the Alias for that (localhost/phpmyadmin) works with no issues.
    I have included the contents of my httpd.conf susphp.conf and virtualhosts files below.
    httpd.conf:
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned. 
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk.  If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule php5_module modules/libphp5.so
    LoadModule suphp_module modules/mod_suphp.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch. 
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features. 
    <Directory />
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.2/mod/core.html#options
        # for more information.
        Options Indexes FollowSymLinks
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        AllowOverride None
        # Controls who can get stuff from this server.
        Order allow,deny
        Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
        DirectoryIndex index.html index.php
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        CustomLog "/var/log/httpd/access_log" common
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
        # Redirect: Allows you to tell clients about documents that used to
        # exist in your server's namespace, but do not anymore. The client
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://www.example.com/bar
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
        # ScriptAlias: This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    <IfModule suphp_module>
        AddHandler application/x-httpd-php .php .php3 .php4 .php5 .phtml
        suPHP_AddHandler application/x-httpd-php
        suPHP_Engine on
    # # Use a specific php config file (a dir which contains a php.ini file)
        suPHP_ConfigPath /etc/php
    # # Tells mod_suphp NOT to handle requests with the type <mime-type>.
    #    suPHP_RemoveHandler <mime-type>
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        TypesConfig conf/mime.types
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #AddType application/x-gzip .tgz
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #AddHandler cgi-script .cgi
        # For type maps (negotiated resources):
        #AddHandler type-map var
        AddHandler php5-script php
        # Filters allow you to process content before it is sent to the client.
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # phpMyAdmin configuration
    Include conf/extra/httpd-phpmyadmin.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    # PHP settings
    Include conf/extra/php5_module.conf
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    suphp.conf:
    [global]
    ;Path to logfile
    logfile=/var/log/suphp.log
    ;Loglevel
    loglevel=info
    ;User Apache is running as
    webserver_user=http
    ;Path all scripts have to be in
    docroot=/var/www:${HOME}/public_html:/srv/http
    ;Path to chroot() to before executing script
    ;chroot=/mychroot
    ; Security options
    allow_file_group_writeable=false
    allow_file_others_writeable=false
    allow_directory_group_writeable=false
    allow_directory_others_writeable=false
    ;Check wheter script is within DOCUMENT_ROOT
    check_vhost_docroot=false
    ;Send minor error messages to browser
    errors_to_browser=true
    ;PATH environment variable
    env_path=/bin:/usr/bin
    ;Umask to set, specify in octal notation
    umask=0077
    ; Minimum UID
    min_uid=33
    ; Minimum GID
    min_gid=33
    [handlers]
    ;Handler for php-scripts
    application/x-httpd-php="php:/usr/bin/php-cgi"
    ;Handler for CGI-scripts
    application/x-suphp-cgi="execute:!self"
    httpd_vhosts.conf:
    # Virtual Hosts
    # If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at
    # <URL:http://httpd.apache.org/docs/2.2/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    NameVirtualHost *:80
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for all requests that do not
    # match a ServerName or ServerAlias in any <VirtualHost> block.
    <VirtualHost *:80>
        ServerAdmin [email protected]
        DocumentRoot "/home/alexie/websites/RapidFire/public_html"
        ServerName rapid.mouse
        ErrorLog "/var/log/httpd/rapid.mouse"
        CustomLog "/var/log/httpd/rapid.mouse" common
        Options FollowSymlinks
        suPHP_Engine on
        SuexecUserGroup alexie users
        SuPHP_UserGroup alexie users
    </VirtualHost>
    Any help would be appreciated as I've been googling this all morning with no joy.

    The problem is that you have DSO module (php5_module a.k.a. mod_php) and suphp_module running at the same time. You can do this as long as both modules have differents handlers.
    From Apache docs:
    A "handler" is an internal Apache representation of the action to be performed when a file is called. Generally, files have implicit handlers, based on the file type. Normally, all files are simply served by the server, but certain file types are "handled" separately.
    In your case, both php5_module and mod_php are interpreting "application/x-httpd-php".
    Another advice, while the virtual host approach is semantically correct, remember that you could delegate it over userdir module. In other words, use public_html folder in user home directory and put settings of suPHP on http-userdir.conf file.
    Please check the wiki page for more information: https://wiki.archlinux.org/index.php/suPHP

  • Error while installing NetWeaver CE 7.2 trial at step 21

    Dear SDN,
    I am trying to install the NetWeaver CE 7.2 trial version. A the step 21 (u201CInstall Instance basics of SCS01u201D) I get the following error:
    Message:
    u201CAn error occurred while processing option SAP NetWeaver Developer Edition > Server( Last error reported by the step :'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.).u201C
    Trace 1:
    An error occurred at step:
    ERROR 2010-08-13 19:10:32.227 [sixxcstepexecute.cpp:988]
    FCO-00011 The step createService with step key NW_Instance -> createService was executed with status ERROR
    Logfile location: C:\Programme\sapinst_instdir\NW72_DEV_ADA\SERVER\sapinst.log
    999  ERROR 2010-08-13 19:10:32.227 [sixxcstepexecute.cpp:988]
    FCO-00011 The step createService with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|12|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR ( Last error reported by the step :'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.).
    Trace sapinst and sapinst-dev:
    WARNING[E] 2010-08-13 19:10:03.556 [ianxbservi.hpp:244]
    CServiceHandle::Open(ClusSvc)
    FSL-06002  Error 1060 (Der angegebene Dienst ist kein installierter Dienst. ) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
    ERROR      2010-08-13 19:10:32.157
    CJSlibModule::writeError_impl()
    MOS-01011  'C:/usr/sap/CE1/SYS/exe/uc/NTI386/sapstartsrv.exe' returned with '-1'.
    My system configuration:
    OS: Windows XP Professional SP 2 (32 Bit)
    RAM: 1.5GB
    User: Administrator (local user Administrator)
    JAVA Engine: JDK/JRE 1.6 with Update 21
    Can someone please let me know how should I resolve this?
    Regards,
    Laszlo

    Hi Laszlo,
       The Java troubleshooting guide http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/dc49a7fb-0701-0010-88bf-f45221a97d15&overridelayout=true has some suggested solutions or trouble shooting steps for the MOS-01011 error - starting on page 19.
      I also noticed that you only have 1.5GB of RAM but minimum requirement states 2GB, could be related, could not. Have never tried to install CE with less than 2GB of RAM http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab ;-).
    HTH.
    O.

  • Error 500 with .htaccess and +FollowSymlinks

    Hi, I'm doing a website for a community of gamers and I have one .htaccess on the root folder of the website that cointains parameters to allow using friendly urls. The content of the .htacces is this:
    RewriteEngine On
    Options +FollowSymLinks
    RewriteBase /~doodom/doomhispano/
    Rewriterule ^administracion/$ ?administracion
    Rewriterule ^articulos.html$ ?articulos
    Rewriterule ^descargas.html$ ?descargas
    Rewriterule ^foro/$ ?foro
    Rewriterule ^foro/(.*)/(.*)/(.*)/(.*).html$ ?foro&cat=$1&sub=$2&thr=$3&title=$4
    Rewriterule ^foro/(.*)/(.*)/$ ?foro&cat=$1&sub=$2
    Rewriterule ^foro/(.*)/$ ?foro&cat=$1
    Rewriterule ^juegos.html$ ?juegos
    Rewriterule ^logout.html$ logout.php
    Rewriterule ^noticias/$ ./ [R]
    Rewriterule ^noticias/(.*)/(.*).html$ ?noticias&id=$1&title=$2
    Rewriterule ^noticias/archivo(.*).html$ ?offset=$1
    Rewriterule ^perfil/$ ./ [R]
    Rewriterule ^perfil/(.*).html$ ?perfil=$1
    Rewriterule ^preferencias.html$ ?preferencias
    Rewriterule ^registro.html$ ?registro
    The problem is that Apache delivers an Error 500 and I don't know why. It always happen when I have uncommented this line:
    Options +FollowSymLinks
    If I comment it the website loads correctly, but the friendly urls don't work at all.
    I also paste the content of my /etc/httpd/conf/httpd.conf
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 81
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule php5_module modules/libphp5.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
    Options Indexes FollowSymLinks
    AllowOverride none
    Order allow,deny
    Allow from all
    </Directory>
    <Directory "/home/*/public_html">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # PHP 5
    Include conf/extra/php5_module.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    And if I check the error_log I can see the following:
    [Tue Jun 02 23:32:39 2009] [alert] [client xx.xx.xx.xx] /home/doodom/public_html/doomhispano/.htaccess: Options not allowed here
    Why does this happen? Any ideas?
    I've searched all along the Internet, I have tried it out everything but still nothing.
    Thanks in advance for your help.
    Last edited by [DoodoM] (2009-06-02 19:48:42)

    Uhm... what's an /etc/httpd/conf/httpd.conf?
    If I had that error, I'd look into /etc/apache/sites* and see if for the site changing follow-symlinks and everything is allowed.
    Then again, that's not an arch server, so you might be better of ignoring me (if your... stuff... is all that different. Me did my server strange chaos admin method like )
    Edit: wah, now I've been confusing myself, that huge config file is a mess in my eyes - are you sure you're supposed to change stuff in there? What folder is your htaccess in? Most I saw look about like that in there...:
    <Directory "??????">
        Options Indexes FollowSymLinks
        AllowOverride none
        Order allow,deny
        Allow from all
    </Directory>
    Which isn't a thaaat good for using .htaccess.
    Last edited by whoops (2009-06-02 20:01:58)

  • Error in import in phase TOOLIMPD3

    Hi all, I am posting with a problem I have just encountered upgrading my Dev 46C system to ECC.
    I didn't encounter this upgrading my sandbox. During the prepare phases, I encounter an error in the phase TOOLIMPD3:
    ERROR: tp terminated with error status -1
    See logfiles with extension .ECO for details. ERROR: 1 errors detected during TOOLIMPD3.
    ERROR: 1 activities have been aborted in TOOLIMPD3.
    ERROR: Operation(s) not completely processed. Remaining change requests found in buffer DEV.
    Ignoring aborted import steps will cause severe inconsistencies and will likely require a full repeat of the whole upgrade. !!!
    Do not manipulate the import buffer !!!
    Analyze summary error logfile TOOLIMPD.ELG and remove all error conditions in the way it is described in the upgrade manual.
    Repeat this phase until it is error free.
    Additional hints may be given in logfiles SLOG700 and G:\usr\sap\put\log\R3up.ECO
    Looking through the files SLOG700, R3up.eco, TOOLIMPD.ELG, and SAPH700VTA.DEV, I see a couple of things:
    In SAPH700VTA.DEV, I see this:
    table E070A (P) synchronized. COMMIT "25169" "25169"
    [ParamStmtExec,line 13368]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. sloledb.cpp
    [ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'NBLENGTH'. sloledb.cpp
    [ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'SYSTEMID'. sloledb.cpp
    [ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'TIMESTAMP'.
    ***LOG BZY=>unexpected return code 100 calling INS [dbsynseq#1 @ 324] db_syflush (TRUE, FALSE) failed 7 0.075652
    db_con_commit received an error return code in before-commit action 7 0.075659 ***
    ERROR => missing return code handler 1 0.075673 caller does not handle code 1024 from dblink
    #7[293] ==> calling sap_dext to abort transaction sap_dext called with msgnr "900":
    DICTIONARY IMPORT end date and time : "20090814145623"
    exit code : "12"
    In R3up.ECO, I see R3trans finishing with the message:
    G:\usr\sap\DEV\SYS\exe\run\R3trans.exe finished (0012).
    stopping on error 12 during DD IMPORT
    and in the SLOG, I see this:
    ERROR SAPK700VTA           DEV H 0012 20090814145623 DDIC         devadm       devh05 20090814145623001b68
    STOP  DD IMPORT            DEV H      20090814145623              devadm       devh05 20090814145623001b68
    ERROR: stopping on error 12 during DD IMPORT

    Looking through the files SLOG700, R3up.eco, TOOLIMPD.ELG, and SAPH700VTA.DEV, I see a couple of things:
    In SAPH700VTA.DEV, I see this:
    table E070A (P) synchronized. COMMIT "25169" "25169"
    [ParamStmtExec,line 13368]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared. sloledb.cpp[ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'NBLENGTH'. sloledb.cpp [ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'SYSTEMID'. sloledb.cpp [ParamStmtExec,line 13368]: Error/Message: (err 207, sev 16), Invalid column name 'TIMESTAMP'.
    ***LOG BZY=>unexpected return code 100 calling INS [dbsynseq#1 @ 324] db_syflush (TRUE, FALSE) failed 7 0.075652 db_con_commit received an error return code in before-commit action 7 0.075659 ***
    ERROR => missing return code handler 1 0.075673 caller does not handle code 1024 from dblink #7[293] ==>
    calling sap_dext to abort transaction
    sap_dext called with msgnr "900":
    DICTIONARY IMPORT end date and time : "20090814145623" exit code : "12"

  • While clicking Responsiby forms not opening no error in oracle apps r12

    Hi DBAs
    After RMAN cloning while clicking responsibilities forms are not opening. We are having two nodes servers. One is Admin & CM node another node is Forms & Web entry server.
    Thanks
    DBA

    In Apache log below having below error
    Directory index forbidden by rule: /u01/oracle/R12/apps/apps_st/comn/java/classes/This error can be ignored -- How To Avoid Error In Apace Error Logfile - Directory Index Forbidden By Rule [ID 1385785.1]
    Again i am running adcfgclone after changing apps password.Why do you have to run adcfgclone after changing the apps password? The cloning procedure is to run adcfgclone and make sure it completes successfully on all tier nodes, then change the apps password and run AutoConfig.
    Have you added the application URL to the trusted sites list from the browser?
    Can you find any errors in the application.log file?
    Thanks,
    Hussein

  • Error instalation CE 7.2

    Hi, Im getting this error.
    does anyone know what it means?
    An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2 > Installation Options > Application Server Java > Standard System > Standard System( Last error reported by the step :Assertion failed: Exception in thread "main" com.sap.sdb.sllib.api.exceptions.DatabaseCommandException: com.sap.sdb.sllib.api.exceptions.ToolException: Error during command: C:\sapdb\programs\pgm\dbmcli.exe -R "E:\sapdb\DB1\db" db_create DB1 , Error! Connection failed to node (local) for database (no dbname): dbmsrv executable not found at com.sap.sdb.sllib.utils.DbCommandForApi.runCommand(DbCommandForApi.java:126) at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain. (SdbCmdMain.java:64) at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.main(SdbCmdMain.java:207)). You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Thanks.
    RP

    C:\Program Files\sapinst_instdir\NW72\INSTALL\NW72\ADA\STD\LogAnalyzer.html
    1029 FCO-00011 An error occurred at step:
    ERROR 2010-02-17 11:11:25.671 [sixxcstepexecute.cpp:988]
    FCO-00011 The step sdb_create_db_instance with step key SDB_INSTANCE_CREATE -> sdb_create_db_instance was executed with status ERROR
    Logfile location: C:\Program Files\sapinst_instdir\NW72\INSTALL\NW72\ADA\STD\sapinst.log
    C:\Program Files\sapinst_instdir\NW72\INSTALL\NW72\ADA\STD\sapinst.log
    ERROR 2010-02-17 11:11:25.593
    CJS-00030  Assertion failed: Exception in thread "main" com.sap.sdb.sllib.api.exceptions.DatabaseCommandException: com.sap.sdb.sllib.api.exceptions.ToolException: Error during command:  E:\sapdb\programs\pgm\dbmcli.exe -R "E:\sapdb\DB1\db" db_create DB1 , Error! Connection failed to node (local) for database (no dbname): dbmsrv executable not found
         at com.sap.sdb.sllib.utils.DbCommandForApi.runCommand(DbCommandForApi.java:126)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.<init>(SdbCmdMain.java:64)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.main(SdbCmdMain.java:207)
    ERROR 2010-02-17 11:11:25.625
    MUT-03025  Caught ESAPinstException in Modulecall: Exception in thread "main" com.sap.sdb.sllib.api.exceptions.DatabaseCommandException: com.sap.sdb.sllib.api.exceptions.ToolException: Error during command:  E:\sapdb\programs\pgm\dbmcli.exe -R "E:\sapdb\DB1\db" db_create DB1 , Error! Connection failed to node (local) for database (no dbname): dbmsrv executable not found
         at com.sap.sdb.sllib.utils.DbCommandForApi.runCommand(DbCommandForApi.java:126)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.<init>(SdbCmdMain.java:64)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.main(SdbCmdMain.java:207)
    ERROR 2010-02-17 11:11:25.671
    FCO-00011  The step sdb_create_db_instance with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|1|0|NW_ADA_DB|ind|ind|ind|ind|8|0|SdbPreInstanceDialogs|ind|ind|ind|ind|4|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_create_db_instance was executed with status ERROR ( Last error reported by the step :Assertion failed: Exception in thread "main" com.sap.sdb.sllib.api.exceptions.DatabaseCommandException: com.sap.sdb.sllib.api.exceptions.ToolException: Error during command:  E:\sapdb\programs\pgm\dbmcli.exe -R "E:\sapdb\DB1\db" db_create DB1 , Error! Connection failed to node (local) for database (no dbname): dbmsrv executable not found
         at com.sap.sdb.sllib.utils.DbCommandForApi.runCommand(DbCommandForApi.java:126)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.<init>(SdbCmdMain.java:64)
         at com.sap.sdt.ins.component.sdb.main.cmd.SdbCmdMain.main(SdbCmdMain.java:207)).
    INFO 2010-02-17 11:11:26.375
    Creating file C:\Program Files\sapinst_instdir\NW72\INSTALL\NW72\ADA\STD\__instana_tmp.xml.
    Thanks

  • [SOLVED] Apache Access forbidden Error 403 localhost

    Hello,
    I believe this should be some thing very stupid, but I  can't find it... so here I am.
    I have just installed apache (# pacman -S apache)
    Configured httpd.comf, and created 2 virtual hosts with extra/httpd-vhosts.conf
    When I believed every thing was ok, I have started Apache as root (# apachectl start)
    Started ok, no errors (also tried start it as user with sudo, and /etc/init.d/httpd start)
    So when I go to http://localhos (or the virtual host) I allways get Access forbidden Error 403
    I have set 777 permissions to /srv/http and the virtual host (/home/username/local-web/site1.dev)
    I have tried every thing , changed dir owners to "http:http" ...
    At the Apache error log I get:
    "[Thu Oct 29 02:39:48 2009] [error] [client 127.0.0.1] (13)Permission denied: access to / denied"
    There is a very simple plain index.html file at /srv/http and the virtual host, all file/dir permissions very permisive... so that can't be the problem.
    Am I missing some thing? Do I need to manually create the "http" user and/or add it to some group?
    Last edited by iopo (2009-10-29 22:06:59)

    Ok, here's the code:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    # LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    # Options Indexes FollowSymLinks
    Options Indexes All
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    <Directory "/home/gral/web-sit/local">
    Options +Indexes FollowSymLinks +ExecCGI
    AllowOverride AuthConfig FileInfo
    Order allow,deny
    Allow from all
    </Directory>
    # this was just a test
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>

  • Error at PHASE   SHD_FIX_IMP in R/3 upgrade.

    Hi,
    i am getting the below error:
    UPGRADE/SHADOW: END OF PHASE   SHD_FIX_IMP
    >> 13:00:28  UPGRADE/SHADOW: START OF PHASE SHD_FIX_IMP
    running C:\usr\sap\put\exe\tp.exe pf=C:\usr\sap\put\bin\SHD_FIX.TPP put DEV
    tp terminated successfully.
    analyzing result of tp call ...
    ERROR: 6 errors detected during SHD_FIX_IMP.
           Analyze summary error logfile SHD_FIX.ELG
           and remove all error conditions in the way
           it is described in the upgrade manual. Repeat
           this phase until it is error free.
           Additional hints may be given in logfiles
           SLOG640 and C:\usr\sap\put\log\R3up.ECO
      LIST OF ERRORS AND RETURN CODES  *******
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CUSTOMER MAIN IMPORT ERRORS and RETURN CODE in B20I8A2NLM.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    2EETW000 Probably the data file was destroyed during file transfer!?
    2EETW000 Probably the data file was destroyed during file transfer!?
    2EETW000 Probably the data file was destroyed during file transfer!?
    1 ETP111 exit code           : "8"
    C:\usr\sap\put\exe\R3trans.exe finished (0000).
    Syslog: k CPG : &0000&C&0000&                                        rscploc   9Syslog: k CP3 : 0000&TCPDB&                                          rscpmi    1This is C:\usr\sap\put\exe\R3trans.exe version 6.09 (release 640 - 05.04.04 - 14:45:00).
    C:\usr\sap\put\exe\R3trans.exe finished (0004).
    Syslog: k CPG : &0000&C&0000&                                        rscploc   9Syslog: k CP3 : 0000&TCPDB&                                          rscpmi    1This is C:\usr\sap\put\exe\R3trans.exe version 6.09 (release 640 - 05.04.04 - 14:45:00).
    2EETW000 Probably the data file was destroyed during file transfer!?
    2EETW000 Probably the data file was destroyed during file transfer!?
    2EETW000 Probably the data file was destroyed during file transfer!?
    C:\usr\sap\put\exe\R3trans.exe finished (0008).
    stopping on error 8 during MAIN IMPORT
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 8
    WARNS: Highest tp internal warning was: 0118
    tp finished with return code: 8
    meaning:
      A tool used by tp produced errors
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: stopping on error 8 during MAIN IMPORT
    Process with ID 3528 terminated with status 8
    Deleting file C:\usr\sap\put\log\SHD_FIX.ELG
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B20I8A1JJN.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B20I8A2NLM.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009743.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009755.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009759.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009760.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B4AI009780.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\B6AI005685.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\F8HI900010.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\RS6I900005.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI012127.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI022467.DEV
    Moving file C:\usr\sap\put\log\PROT.TMP to C:\usr\sap\put\log\Y6DI042418.DEV
    Moving file C:\usr\sap\put\log\SHD_FIX.ELG to C:\usr\sap\put\tmp\SHD_FIX.ELG
    Deleting file C:\usr\sap\put\tmp\MSGIN.LST
    Deleting file C:\usr\sap\put\tmp\MSGOUT.LST
    Deleting file C:\usr\sap\put\tmp\MSGOUT.LOG
    Deleting file C:\usr\sap\put\tmp\SHD_FIX.ELG

    Hello,
    When you get this problem first thing down load the latest R3trans
    then "uncar". Copy the uncar file into "/usr/sap/put/exe" after that
    repet this phase again. After few seconds you get the error again then you do one thing Go to "/usr/sap/<SID>/SYS/exe/run" copy the all files resides in run directory and paste in "/usr/sap/put/exe"
    then again repet the phase you get good output.
    Thanks & Regards,
    Sumanbabu.B

Maybe you are looking for