Error logging in on my new ipad - HELP!!!!

HI!
I just got my ipad, and IM trying to log it in to connect to itunes etc. when I log in, I use my applie ID and my password and then I get this error - For your security, your APple ID login must be an email address....
Well, my ID is not an email address, and I can log on with my ipod touch and also into itunes on the computer without difficulty!!!
I dont really want to change my log in and password and stuff - how can I make this work???
HELP!!!
Thanks, Wendy

Philly_Phan wrote:
I'm concerned about semantics and I'd hate for you or anyone else to misunderstand and get into trouble.  It bothers me that you use the verbiage "Changing the ID..."  You are changing the NAME of an ID.  ALL changes are made here.  Click on "Manage your account."
No - I should apologize for using that terminology, but I think I finally got it through my thick skull. You can change the NAME of the ID and that does not mean you are creating a new ID - you are simply changing the name. That is what I meant in my post above.
I know where to change the "information" if needed. I had to reset my password a few months back and its easy enough to do and it went smoothly with no issues. I have no intention or any need to change the name of my ID. I'm just trying to keep the information straight in my own mind.

Similar Messages

  • Error message whilst trying to download music on new iPad - Help

    I have just set up my new ipad and trying tto download my purchased music....
    It keeps coing up with an error message sayin "Error dowloading 'songs name' please retry", with the options of DONE and RETRY.
    I have been on my itunes on my PC and is downloading the music fine but I want it to download on my ipad
    Anyy suggestions please? x

    Hi, AliiDizzle.
    Thank you for visiting Apple Support Communities. 
    I would start with closing all applications in multitasking and restarting the device.  Once this is done test downloading content again. 
    iOS: Force an app to close
    If the issue persists, here are some additional troubleshooting steps I would recommend. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    Try downloading previously purchased content you are missing on the iPad.  Here are the steps on how. 
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Hope this helps,
    Jason H. 

  • HT4623 hello i canot download aps onto my new ipad ,help.

    Hello. can you help.canot download APPS to my new ipad. HELP.

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • Trade my iPad 2 for new iPad - help

    I want the new iPad. Can I trade in my iPad 2

    Your only option is to sell the iPad and buy a new one.
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
     Cheers, Tom

  • Cant play music on new ipad - HELP

    I just bought a new ipad 3G. While i've synced all my music library and podcasts on my ipad, i can't play any songs/ music as it says on my IPAD "NO MUSIC". I have set to sync all from my itunes on my computer to my ipad.

    Attach the iPad back to your Compuer..
    You need to tap apply after setting which music you want on your iPad. Then Sync again.
    The apply button is bottom right of the page..
    Best

  • Facetime will not log in?! - New ipod - Help!

    I can not figure out for the life of me why facetime will not activate! I have successfully set up a apple id and am logged into that fine...but when I click facetime on new ipod touch it keeps giving me message: "can not sign in please check your network connection and try again"
    But that makes no sense...Apple ID is fine and I have strong wifi where I am. I am surfing web just fine...but facetime will not activate. What can I do??
    Thanks in advance!!

    concort wrote:
    ... apple tech support.... said that their servers are over-taxed today ... doesn't make sense ...
    It sounds reasonable to me. However, it is clear that you do not like the answer.
    At this point your alternatives seem to be:
     • try again later or
     • trade your iPod for a device that works the way you want.
    I'll try again later but thought many more of you could use this info ...
    Wise choice. Thanks for sharing the server load info. I expect it will help others.
    Cheers,
    Jim
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • TS3694 unknown error logging into itunes account on ipad

    hi
    i am having problems logging into my itunes account from my iPad - i keep getting the message: unknown error

    Go to keychain access. Go to preferences. turn Online Certificate Status Protocol and Certificate Revocation List both to off.
    You should now be able to log into iTunes.
    The repairing of Keychain is a wasted step and has nothing to do with this issue. This is another issue.

  • New ipad help

    I just got my first iPad and it is the mini retina 64 gigs. I don't what to do with it?
    What can I/should I do with it?
    Is this a good investment?
    I have 7.0.4 do I need to update the software
    Is this the best iPad or should I take it back for a better one? I don't want ppl to make fun of me saying my ipad is not as good as theirs.
    Is 64 gigs enough space to do stuff like photos? All I do is photos, music, only card games and browse the web with many bookmarks and favorites.
    How do I download apps for the iPad because I don't want apps for the iPhone.
    Is this basically just an iPhone? Because I have the 4s already.
    How can I get internet on it without wifi. I can transfer internet from my iPhone to the ipad?

    yes, it is a good machine.  It will do anything a full size pad will do, just on a smaller screen.  You pad is as good as anybody elses....
    I like a bigger screen, I have a pad.  My wife likes the smaller size, she has a mini.
    Download apps just like you do on your phone from the app store.  It will run ipad only apps, that your phone wont.  It is a lot better for reading and viewing, and for me, any writing etc that are hard for fat thumbs on small screens. 
    The wifi in the pad will grab any wifi signal that is open for acess, like starbucks etc.  And your i phone can generate a hotspot for you to use, providing your call carrier has set your account up for it.  (AT&T charges some additional $$ for that feature - but a lot less than a whole additional account would cost, not to mention the additional cost for the cell equipped mini.
    and yes,  - get updated to 7.1.1, or your facetime will likely not work.

  • I having error, while staring Xampp Apache server. This is error log which I have. Please help me through this.

    [Tue Jan 13 09:20:24.754998 2015] [ssl:warn] [pid 7516:tid 384] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
    [Tue Jan 13 09:20:24.833126 2015] [core:warn] [pid 7516:tid 384] AH00098: pid file C:/xampp/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    [Tue Jan 13 09:20:24.989377 2015] [ssl:warn] [pid 7516:tid 384] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
    [Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00455: Apache/2.4.10 (Win32) OpenSSL/1.0.1i PHP/5.5.19 configured -- resuming normal operations
    [Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00456: Apache Lounge VC11 Server built: Jul 17 2014 11:50:08
    [Tue Jan 13 09:20:25.051877 2015] [core:notice] [pid 7516:tid 384] AH00094: Command line: 'c:\\xampp\\apache\\bin\\httpd.exe -d C:/xampp/apache'
    [Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00418: Parent: Created child process 6284
    [Tue Jan 13 09:20:25.786255 2015] [ssl:warn] [pid 6284:tid 392] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
    [Tue Jan 13 09:20:26.129998 2015] [ssl:warn] [pid 6284:tid 392] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
    [Tue Jan 13 09:20:26.176874 2015] [mpm_winnt:notice] [pid 6284:tid 392] AH00354: Child: Starting 150 worker threads.

    ok thanks

  • TS2446 Forgot my security questions answer. Got new iPad,,,help

    I don't know the answer to my se unity question... I forgot

    Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

  • HT1430 i CAN'T ACTIVATE MY VERIZON CELLULAR ON NEW IPAD-HELP?

    i went through steps as directed verizon is still not activated.

    See this -> http://support.apple.com/kb/HT4571

  • DML Error Logging

    When I tried
    EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('table');
    in Oracle Database XE, I got error: ORA-00900: invalid SQL statement.
    Error Logging Table is a new feature for 10g. Does XE has this new feature?
    Thanks for the help!

    It works!!!
    The issue only happens in Oracle SQL Developer and Oracle console opened in IE browser.
    The issue also happens in SQL Command Line if using "begin" and "end" as the begining and the ending of the SQL statement
    SQL> begin
    2 EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('MIGR_STOCK')
    3 end;
    4 /
    EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('MIGR_STOCK')
    ERROR at line 2:
    ORA-06550: line 2, column 9:
    PLS-00103: Encountered the symbol "DBMS_ERRLOG" when expecting one of the
    following:
    := . ( @ % ; immediate
    The symbol ":=" was substituted for "DBMS_ERRLOG" to continue.
    ORA-06550: line 3, column 1:
    PLS-00103: Encountered the symbol "END" when expecting one of the following:
    . ( * % & = - + ; < / > at in is mod remainder not rem
    <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
    LIKE4_ LIKEC_ between || multiset m
    SQL>
    However it works well if only execute one line command
    SQL> DROP TABLE ERR$_MIGR_STOCK CASCADE CONSTRAINTS PURGE;
    Table dropped.
    SQL> EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('MIGR_STOCK');
    PL/SQL procedure successfully completed.
    Don't know why? But Thank you very much!!!

  • Error Log in Direct Input Method of LSMW

    Hello!
    We are developing an upload through LSMW using its direct input method for material master. This method is better than the Recording method but the only problem we are having is maintaining the error log. Unlike the recording method, in direct input the system gives an error log but it cant me maintained in a permanent file i.e when we go back to the upload for specifying a new file, the error log of the previous file is gone.
    Is there any way that we can maintain the error log in a permanent file? Help needed ASAP!
    Thank You!
    Regards
    Sahar

    When i enter %PC in the command field the system gives following information
    Function code cannot be selected
         Message no. 00255
    Diagnosis
         You entered an inactive function code.
         You can trigger this by:
         o   inputting directly in the OK code field,
         o   inputting the fastpath of an inactive menu function,
         o   choosing an inactive function key, or even by
         o   choosing ENTER, if ENTER has an inactive function.
         In batch input, a function code is included in field BDC_OKCODE of the
         session, if this function code is not assigned to ENTER.

  • Name of the database tables where the error log (SM35) values are present

    Hi,
    I want to know the database tables which contains the values of the error log present in SM35.
    Plz help me out.

    Hi,
        Check out for APQI Table with
    GROUPID
    PROGID
    QSTATE
    CREATOR
    MSGCNTE
    APQL Batch Input Log Directory
    Regards
    Bala Krishna
    Edited by: Bala Krishna on Feb 11, 2009 3:45 PM

  • HT5953 Transfer Books from iTunes to iBooks on a new iPad, iBooks is empty

    I am trying to transfer books from iTunes to a new iPad and the iBooks is empty. The books are there in iTunes but I just can't get them over to iBooks on the new iPad, HELP!

    Hi there ldk10,
    You may find the information in the article below helpful.
    iBooks: How to sync iBooks between devices
    http://support.apple.com/kb/HT5826
    -Griff W. 

Maybe you are looking for

  • Issues to Configure SAML ,I tried alot but its not working ,Below Given instruction how to configure SAML

    SAML Overview Security Assertion Markup Language (SAML) is an XML-based standard for exchanging authentication and authorization data between security domains, that is, between an identity provider (a producer of assertions) and a service provider (a

  • Create PO using Idoc with free goods

    Hi guys, i'am currently working on a projekt i need to create a purchase order containing free goods. We've already tested the PORDCR/PORDCR1 message and Idoc types PORDCR101/102 with BAPI's IDOC_INPUT_PORDCR1  - w/ self-defined process code (via we4

  • Processing xml in abap mapping

    Hi all, I use abap mapping to create XML from Idoc, I use if_ixml interface to do it. In my code I use method get_elements_by_tag_name (on object if_ixml_document) to find all elements with the same name: I checked my mapping in  SXI_MAPPING_TEST and

  • DvD Studio Pro recently updated, not working properly

    Sometime it seems it just doesn't pay to update software. I Recently updated my OS to Tiger and along with it I updated to the latest FCP and DVD Studio pro. Now in DVD Studio Pro it will not properly read existing projects and when I build a project

  • Problem in export Number field into graphical reports

    I have a custom field Number1. I put a decimal number (italian version)  0,5 I use Number1 inside Cost1...to make some calculations, so the number format I see that is correct. I use Number1 as dimension into a graphical report (to excel file). Into