Error looking up remote object

I have created an application that needs to reference several synonyms that exist in another schema on another server.
When I compile my package in SQL Developer, I run into the error message:
ORA-04045: errors during recompilation/revalidation of GILLNET_TAG.GILLNET_TAG
ORA-04052: error occurred when looking up remote object PERMIT.VPS_FISHERY_NER@DER1_PERMIT
ORA-00604: error occurred at recursive SQL level 2
Note that the error refers to only 1 of the 4 synonyms -- VPS_FISHERY_NER
The others seem fine.
I created this synonym like this:
CREATE PUBLIC SYNONYM vps_fishery_ner FOR permit.vps_fishery_ner@der1_permit;
Note that this is a synonym that references a synonym, as are the other 3.
Any ideas as to why this error is happening?
The DBMS is 10g.
Thanks.

I have already posted the error that I see in SQL Developer -- it occurs when I simply compile the package.
Far from being impossible, it is actually happening.
I ran the Select statement that references the synonym in SQL Plus, just as you asked me to. There were no errors. I saw rows from a table in another schema on another server. I don't want to show you the result set since the data is confidential.
There's got to be a reason that we're overlooking.
Edited by: Prohan on Mar 10, 2009 1:58 PM

Similar Messages

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

ORA-04052: error occurred when looking up remote object SYS.DBMS_UTILITY@..

Hello,
I'm trying to import data van 10XE version to new 11XE version over db_link.
When using the method I run into following error:
ORA-04052: error occurred when looking up remote object SYS.DBMS_UTILITY@<<db_link_name>>
This seems to be a bug in 10.2.0.1 fixed in later 10.2 versions, according to the database general forum. "upgrade to newer version"
But how do i fix this bug in 10XE? Or is the only way around to use the 'old-fashioned' way of exporting data from 10XE to a file, transfer the file and import it in 11XE?
Best regards,
Jan.

No, you cannot apply a patch to XE. Basically the XE internal code is the same as for any other edition. That means is there a bug, you have it in XE,too. To get patches you need a licence for metalink/My Oracle Support. But even you would have one, it wouldn't help you, because Oracle does not provide patches for XE.
That's the 'price' you have to pay for this free edition.
Werner

ORA-04052: error occurred when looking up remote object SYS.DBMS_SNAPSHOT

Hello everyone,
When I tried to create a materialized view with refresh fast mode, I encountered following error message.
The MV log has been created on my_table like this:
create materialized view log on my_table
tablespace data3
with rowid, sequence
including new values;
The database link has been created like this:
CREATE PUBLIC DATABASE LINK my_db
CONNECT TO myname
IDENTIFIED BY mypassword
USING 'my_db';
Could anybody please let me know why I can not create MV with refresh fast? What I did wrong?
Thanks in advance!!!
MYDB>select count(*) from my_table@my_db;
COUNT(*)
5
Elapsed: 00:00:00.01
MYDB>create materialized view my_mv
2 tablespace data4
3 build immediate
4 refresh fast with rowid
5 as
6 select * from my_table@my_db
select * from my_table@my_db
ERROR at line 6:
ORA-04052: error occurred when looking up remote object SYS.DBMS_SNAPSHOT@my_db
ORA-00604: error occurred at recursive SQL level 2
ORA-06544: PL/SQL: internal error, arguments: [55916], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [55916]
ORA-02063: preceding 2 lines from my_db
Elapsed: 00:00:00.29
MYDB>create materialized view my_mv
2 tablespace data4
3 build immediate
4 as
5 select * from my_table@my_db;
Materialized view created.
Elapsed: 00:00:00.20

No, you cannot apply a patch to XE. Basically the XE internal code is the same as for any other edition. That means is there a bug, you have it in XE,too. To get patches you need a licence for metalink/My Oracle Support. But even you would have one, it wouldn't help you, because Oracle does not provide patches for XE.
That's the 'price' you have to pay for this free edition.
Werner

Getting "error occurred when looking up remote object" During IMPDP

Hi
I am doing a migration from one server to another server. I am on testing period. I am working on this setup
SALESDB - RHEL 5.2(64bit) and Oracle Database 10.2.0.4
It has schemas: SALESMGR, TARGET, REPORT and FINANCE
These schemas will be migration to another database with the same name (we will be shutting down SALESDB 10g after the migration)
SALESDB - RHEL 5.5(64bit) and Oracle Database 11.2.0.2
====================================
The EXPDP process of the schemas in 10g DB are good and no errors where encountered. But during the IMPDP process of the schemas in 11g DB, I got the follwing erorrs:
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "BEGINNING_BALANCE_PKG" COMPILE REUSE SETTINGS TIMESTAMP '200"*
*"9-05-11:09:26:16'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_FAULT_CODES" COMPILE REUSE SETTINGS TIMESTAMP '2009-05-1"*
*"0:02:49:13'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_IFACE_SALESPRD_DATA" COMPILE REUSE SETTINGS TIMESTAMP '20"*
*"11-09-22:10:33:12'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESMGR@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_COPY_TC_RECPT_TO_ITEM_RECPT" COMPILE REUSE SETTINGS TIMESTAM"*
*"P '2009-05-10:06:07:09'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_SALES_INVOICE_CREATE_XML_TR" COMPILE REUSE SETTINGS TIMESTAM"*
*"P '2009-05-10:06:07:23'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_TR_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_SALES_INVOICE_CREATE_XML" COMPILE REUSE SETTINGS TIMESTAMP '"*
*"2009-05-10:06:03:01'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
IMP-00017: following statement failed with ORACLE error 4052:
*"ALTER PACKAGE "PKG_PARSE_GRAPHIC" COMPILE REUSE SETTINGS TIMESTAMP '2009-05"*
*"-10:06:07:23'"*
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object SALESMGR.SALESPRD_DETAIL@SALESPRD_LINK
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve the connect identifier specified
*. importing SALESMGR's objects into SALESMGR*
*. importing SALESMGR's objects into SALESMGR*
I have not created the complete TNS entries in the TNSNAMES.ORA file in the new Oracle 11g. We will be updating this on the actual migration process. Is this the root cause of the problem? I am sure that all database links are existing but upon validating it, it says "ORA-02019: connection description for remote database not found."
Any ideas or feedback on this?
Thanks!

Hello,
Yes, this is the root cause : Oracle can not compile your packages if it can not connect to remote tables.
You have to create those entries in your tnsnames, but may be you can reference some test databases in your tnsnames instead of the real production databases, to avoid mistakes.
Regards,
Sylvie

ORA-04052: error occurred when looking up remote object

Hi, Basically I want to setup Replication between two servers, 'ZEN2K7' & 'DB' (Advanced master-to-master replication, Sync).
This is what i had done so far.(Both server having ver 10.1.0.2.0)
At Server 'ZEN2K7'
CONNECT system/manager@ZEN2K7
CREATE USER repadmin IDENTIFIED BY repadmin;
ALTER USER repadmin DEFAULT TABLESPACE POOL_DATA;
ALTER USER repadmin TEMPORARY TABLESPACE TEMP;
GRANT connect, resource TO repadmin;
EXECUTE dbms_repcat_admin.grant_admin_any_schema('repadmin');
GRANT comment any table TO repadmin;
GRANT lock any table TO repadmin;
EXECUTE dbms_defer_sys.register_propagator('repadmin');
GRANT execute any procedure TO repadmin;
CREATE PUBLIC DATABASE LINK DB USING 'DB';
CONNECT repadmin/repadmin@ZEN2K7
CREATE DATABASE LINK DB CONNECT TO repadmin IDENTIFIED BY repadmin;
At Server 'DB'
CONNECT system/manager@DB
CREATE USER repadmin IDENTIFIED BY repadmin;
ALTER USER repadmin DEFAULT TABLESPACE POOL_DATA;
ALTER USER repadmin TEMPORARY TABLESPACE TEMP;
GRANT connect, resource TO repadmin;
EXECUTE dbms_repcat_admin.grant_admin_any_schema('repadmin');
GRANT comment any table TO repadmin;
GRANT lock any table TO repadmin;
EXECUTE dbms_defer_sys.register_propagator('repadmin');
GRANT execute any procedure TO repadmin;
CREATE PUBLIC DATABASE LINK ZEN2K7 USING 'ZEN2K7';
CONNECT repadmin/repadmin@DB
CREATE DATABASE LINK ZEN2K7 CONNECT TO repadmin IDENTIFIED BY repadmin;
After this, Create master replication group on ZEN2K7
CONNECT repadmin/repadmin@ZEN2K7
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => '"REPTEST"',
qualifier => '',
group_comment => '');
END;
Then at 'ZEN2K7', when i executing
BEGIN
DBMS_REPCAT.ADD_MASTER_DATABASE(
gname => '"REPTEST"',
master => 'DB',
use_existing_objects => TRUE ,
copy_rows => TRUE ,
propagation_mode =>'SYNCHRONOUS');
END;
I got following error
ORA-04052: error occurred when looking up remote object REPADMIN.SYS@DB
ORA-00604: error occurred at recursive SQL level 2
ORA-12154: TNS:could not resolve the connect identifier specified
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 4262
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2156
ORA-06512: at "SYS.DBMS_REPCAT", line 146
ORA-06512: at line 2
I had already execute the 'catrpc.sql' on both server.
I had already check the connection at 'ZEN2K7' side, means I can connect to 'DB' within SQL* Plus at 'ZEN2K7' side.
What else need to do???
Thanks.
Gurpreet S. Gill

ORA-12154: TNS:could not resolve the connect identifier specified
This means that you server is unable to resolve DB alias.
Check you SQL*Net settings.
On ZEN2K7 try tnsping db. If tnsping return error that add db alias to tnsnames.ora if you use tnsnames as one of resolving mechanism (check sqlnet.ora for NAMES.DIRECTORY_PATH)

ORA-04052: error occurred when looking up remote object REPADMIN.SYS@CEL2.W

Hi,
on 10gR2 , on WIN 2003 server :
C:\>sqlplus repadmin/***@CEL2.WORLD
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jun 22 09:54:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAnd then :
CONNECT repadmin/******@CEL1.WORLD
BEGIN
   DBMS_REPCAT.ADD_MASTER_DATABASE (
      gname => 'REPG',
      master => 'CEL2.WORLD',
      use_existing_objects => TRUE,
      copy_rows => FALSE,
      propagation_mode => 'ASYNCHRONOUS');
END;
BEGIN
ERROR at line 1:
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 2
ORA-12545: Connect failed because target host or object does not exist
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 4271
ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2156
ORA-06512: at "SYS.DBMS_REPCAT", line 146
ORA-06512: at line 2Thank for help.

Thank you. I think it is a problem with dB_LINK.
SQL> select db_link from dba_db_links;
DB_LINK
CEL2.WORLD
CEL2.WORLD
SQL> select count(*) from [email protected];
select count(*) from [email protected]
ERROR at line 1:
ORA-12505: TNS:listener does not currently know of SID given in connect
descriptor
SQL> select count(*) from SCOTT.EMP@CEL2;
select count(*) from SCOTT.EMP@CEL2
ERROR at line 1:
ORA-02019: connection description for remote database not foundI can not see how to correct it ?
Thanks.

ORA-04052: error occurred when looking up remote object STRMADMIN.DBMS_AQAD

ORA-04052: error occurred when looking up remote object STRMADMIN.DBMS_AQADM@PROD
ORA-00604: error occurred at recursive SQL level 4
ORA-12170: TNS:Connect timeout occurred
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7616
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
my capture and apply proccess are enable.but the propagation gives the above error
how could i sole this?

Compliant to global_name ? Please browse a bit this forum, global name issue arise every 2 days.
STRMADMIN.DBMS_AQADM@PROD

Error passing a remote object in a rmi function call

Hi,
I've a problem passing an UnicastRemoteObject extended object in a rmi function call. I get the following error
java.lang.IllegalArgumentException: argument type mismatch
I've 2 Remote Objects: GalaxyRegistration and Station. I want to pass a Station Object as argument in a function from GalaxyRegistration. Does anyone know what the problem is?
Here is the code:
public class GalaxyRegistration
extends UnicastRemoteObject
implements GalaxyRegistrationInterface, Galaxy {
     public GalaxyRegistration() throws RemoteException {
     public void add(Station station) throws RemoteException {
          stations.addElement(station);
          System.out.println("Add Station " + station.getName());
public class Station
extends UnicastRemoteObject
implements StationInterface {
     SystemInfo system;
     public Station(String name, String description, Coordinate position, Profile profile)
throws RemoteException {
          system = new SystemInfo(name, description, position, profile);
public class StationServer {
     Station station;
     public void run() {
          // create new Station
          System.out.println("Create new Station:");
          // register and bind new station
          try     {
               station = new Station(name, descr, location, profile);
               System.out.println("Station created ...");
               GalaxyRegistrationInterface registry =
                         (GalaxyRegistrationInterface)
                         Naming.lookup
("//localhost/GalaxyRegistration");
               System.out.println("Registry looked up ...");
               // >>>>>>>> NEXT LINE IS THE ERROR LINE <<<<<<<<<<<<<<
               registry.add(station);
          } catch(Exception e) {
               System.out.println(e);
}

regardless of any other problems in your code, neither of the objects which you are subclassing from UnicastRemoteObject call the superclass constructor, which is a pretty basic flaw - in this case, it will lead to neither of these objects being exported properly.

Error while using Remote object

Badri can you please put the code that we are using

The remoting-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="GISDBChart">
<properties>
<source>com.ge.gis.reports.GISDBChart</source>
<scope>application<scope>
</properties>
</destination>
<destination id="GISDBReport">
<properties>
<source>com.ge.gis.reports.GISDBReport</source>
<scope>application<scope>
</properties>
</destination>
</service>
The service-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service-include file-path="remoting-config.xml" />
</services>
<security>
<login-command
class="flex.messaging.security.TomcatLoginCommand"
server="Tomcat"/>
<security-constraint id="basic-read-access">
<auth-method>Basic</auth-method>
<roles>
<role>guests</role>
<role>accountants</role>
<role>employees</role>
<role>managers</role>
</roles>
</security-constraint>
</security>
<channels>
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
<channel-definition id="my-secure-amf"
class="mx.messaging.channels.SecureAMFChannel">
<endpoint
url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure"
class="flex.messaging.endpoints.SecureAMFEndpoint"/>
<properties>

<add-no-cache-headers>false</add-no-cache-headers>
</properties>
</channel-definition>
<channel-definition id="my-polling-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>true</polling-enabled>
<polling-interval-seconds>8</polling-interval-seconds>
</properties>
</channel-definition>
</channels>
<logging>
<target class="flex.messaging.log.ConsoleTarget"
level="Error">
<properties>
<prefix>[Flex] </prefix>
<includeDate>false</includeDate>
<includeTime>false</includeTime>
<includeLevel>false</includeLevel>
<includeCategory>false</includeCategory>
</properties>
<filters>
<pattern>Endpoint.*</pattern>
<pattern>Service.*</pattern>
<pattern>Configuration</pattern>
</filters>
</target>
</logging>
<system>
<redeploy>
<enabled>true</enabled>
<watch-interval>20</watch-interval>
<watch-file>{context.root}/WEB-INF/flex/services-config.xml</watch-file>
<touch-file>{context.root}/WEB-INF/web.xml</touch-file>
</redeploy>
</system>
</services-config>
The Error is
getFaultHandler: [FaultEvent fault=[RPC Fault
faultString="Send failed" faultCode="Client.Error.MessageSend"
faultDetail="Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Status 503: url: '
http://alpigedv4275.corporate.ge.com/portal/messagebroker/amf'"
messageId="06F0E133-07D6-FBCE-037C-DD26A718AE9D" type="fault"
bubbles=false cancelable=true eventPhase=2]
Please Guide me with this problem.... Its Urgentttttt

Error While calling remote object

[RPC Fault faultString="Send failed" faultCode="Client.Error.MessageSend" faultDetail="Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'http://localhost:8080/Remote/messagebroker/amf'"]
This is the error I am getting when I am trying to call a method in java
This is java code
package demo;
public class Hello
public String sayHello()
System.out.println("1st Method is calledddddddd");
return "Hello World!";
public String sayHelloWithParam(String str){
System.out.println("2nd Method is calledddddddd");
return "You have typed "+str;
This is my mxml code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
public function sayHello(event:ResultEvent):void{
label1.text=event.result.toString();
public function sayHelloWithParameter(event:ResultEvent):void{
label1.text=event.result.toString();
]]>
</mx:Script>
<mx:RemoteObject id="hello" destination="helloworldclass" fault="mx.controls.Alert.show(event.fault.toString())">
<mx:method name="sayHello" result="sayHello(event)"/>
<mx:method name="sayHelloWithParam" result="sayHelloWithParameter(event)"/>
</mx:RemoteObject>
<mx:Label x="55" y="51" text="Label" id="label1"/>
<mx:Button x="253" y="49" label="Button1" click="hello.sayHello()"/>
<mx:TextInput x="55" y="106" id="t1"/>
<mx:Button x="253" y="106" label="Button2" click="hello.sayHelloWithParam.send();"/>
</mx:Application>
When I click the button I am getting that error..
Please help me in solving this

Your server code must be faulty. If things work well you should see a blank screen when you point your browser to the amf endpoint.
An Apache message like "The requested resource (/bpm-backend/whatever) is not available." indicates that something in your server app is not working properly or not mapped right.

Error when pass remote object in RMI

I am using RMI, I have implemented a server, this server provide a method to return back a Database object, client use this Database to manipulate database, the Database extends UnicastRemoteObject. in client code, I use a variable to hold the returned reference, the code is like: database = server.register(), but here I got an error like this:
java.lang.ClassCastException: njproducts.server.DatabaseProxy_Stub
at njproducts.server.ServerImpl_Stub.register(Unknown Source)
at njproducts.client.DatabaseAdapter.<init>(DatabaseAdapter.java:54)
at njproducts.client.MainFrame.main(FBNFrame.java:162)
is there somebody can help me on this?

Not without you psoting some code.
Possible problem: Difference between object type being returned, vs the type of the reference (i.e., the method that returns an object should have a return type of the interface name).

ORA-04052: error occurred when looking up remote obj in mapping execution

Hi,
While executing an OWB mapping, I am getting the following error:
============
Starting Execution UII_D_MAP_SPC_INSTALLATION_SIT
Starting Task UII_D_MAP_SPC_INSTALLATION_SIT
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
ORA-02063: preceding 3 lines from BIP2S@BIPDRACONN
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 73
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 1672
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 2353
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 6838
ORA-06512: at line 1
Completing Task UII_D_MAP_SPC_INSTALLATION_SIT
Completing Execution UII_D_MAP_SPC_INSTALLATION_SIT
============
Actually, here UII_ODS_OWNER itself is the target schema and <<UIIVS.DEVENV1.BT.CO.UK>> is the database in which this schema exists. And the mapping "UII_D_MAP_SPC_INSTALLATION_SIT" is being executed in the same target schema UII_ODS_OWNER.
I am not sure why this above error is coming because such a dblink 'UIIVS.DEVENV1.BT.CO.UK' does not exist in the OWB generated package code. And the 2nd dblink 'BIP2S@BIPDRACONN' does not exist in the code, intead it exists as "BIP2S.DEVENV1.BT.CO.UK@BIPDRACONN" in the package code which is correct (as per OWB configuration & database).
Same error also comes when I try to execute the same mapping from the OWB DEPLOYMENT MANAGER.
Thanks & Regards,
lenin

Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick

Simple Single-Source Replication(error occurred when looking up remote obj)

Dears
I am following the "Simple Single-Source Replication Example"
(http://download.oracle.com/docs/cd/B19306_01/server.102/b14228/repsimpdemo.htm#g1033597)
In Configure Capture, Propagation, and Apply for Changes to One Table; when I Set the Instantiation SCN for the hr.jobs Table at str2.net by following procedure
SQL> DECLARE
2 iscn NUMBER; -- Variable to hold instantiation SCN value
3 BEGIN
4 iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
5 [email protected](
6 source_object_name => 'scott.emp',
7 source_database_name => 'str1.net',
8 instantiation_scn => iscn);
9 END;
10 /
DECLARE
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02085: database link STR2.NET connects to
ORCL.REGRESS.RDBMS.DEV.US.ORACLE.COM
Note also advise where should I have to execute above at (STR1.NET or STR2.NET)
regards;

Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick

FPN - error trying to lookup object - remote role assignment not working

Hello everyone,
We have implemented a Federated Portal Network connection in our landscape between our portals.
We use only remote role assignment functionality.
Everything was working fine, but since 2 days we encounter the following error in the Default trace.
Error trying to lookup object: alias: <role name>
It is possible to open the producer portal in the Portal Content Administration and also searching for the Producer portal roles is possible in User administration. But when we assign the remote role the tab is not displayed in the portal only the above mentioned error is shown in the default trace. Our portals run SP 12 and BI Java SP14.
Is there a solution or workaround for this issue ?
Martin

Hi,
I have the same issue as you, I cannot see role tabs in Consumer portal and I get the same error in the defaulttrace as you.
What did you do to resolve this issue?
Many thanks
Gordon

Error looking up remote object

Similar Messages

Maybe you are looking for