Error-lsmw -in the step specify file

HI ALL,
Iam struck up in lsmw . I doing for the transaction "mb11" , opening inventory balance .
when i do the step " SPECIFY FILE " , iam getting error like "specify a logical path " . I have choosed a file on the local pc .
what would be the problem .
Plz help me in this.
thanks,
regards,
rajkasi.

Just choose one of the logical files from the dropdown. This is not where you specify the file from PC. Hopefully there is one called "TEST".  This is what I use for all of my LSMWs.  It's just asking for a place to put the data that is read and converted.
Regards,
Rich Heilman

Similar Messages

  • "An error occurred creating the application.Check file system permission"

    Hi There ,
    I am facing a problem in creating a webcenter portal webapplication.
    I have followed the steps given in Help topics of Jdeveloper,but after performing all the steps i am getting this error
    "An error occurred creating the application.Check file system permission". Kindly help me to get through this error.
    Regards
    Vivek

    Hi Vivek,
    I hope this is the problem with permission.you Don't have Admin permission to access those folder.
    my Suggestion is
    1.use Administrator account(on windows) for develop applications(its give full access to the folder from your system). or
    2 open your JDeveloper as Administrator. (just right click on JDeveloper from you shortcuts or from programs run as Administrator)
    I hope this will be helpful.
    Best Regards
    Siva Sankar

  • I was installing an update when I got the error message that the MSVCR80.dll file was missing.  It wants me to reload itunes.  What do I do?

    I was installing an update when I ogt the error message that the MSVCR80.dll file was missing and windows error 126.  What do I do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error  while accessing the application server file

    Hello,
    When I try to load the data from CSV file to PSA , I am getting following error message
    "Error  while accessing the application server file"
    "Errors in source system"
    I gave the right file path
    I am not sure about this error message.
    Thanks,

    Hi ram,
    if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
    Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
    Bye
    Frank

  • Error message -48: The itunes library file cannot be saved.

    Hello,
    When I open up my itunes i get an error message 48 - the itunes library file cannot be saved. All my data is there - music, podcasts etc. Just wondering if this error message means anything, if so what, and what I can do to fix it?
    Thanks!

    I just called Apple Support and I think they helped me, but I'm still waiting to see if the error message returns. I was experiencing the same problem. Whenever I started iTunes, I would get the -48 error message. Everything else was working fine. Apple Support instructed me to delete some files from a folder and restart my pc. I did this and it seems to have worked. The folder is on my C:/ drive. Using Windows Explorer, I went to my C:/ drive and then opened the following folders in this order: "Documents and Settings", "Administrator", "Application Data", "Apple Computer", "iTunes", "iPod Software Updates". Inside the iPod Software Updates folder, I found four files which I deleted. I then emptied my trash can and restarted my pc. After I restarted my pc and opened iTunes, the error message did not come up. So it looks like my problem has been solved. Just some minor glitch having to do with the last update. I should mention that I did just get an iPod Classic 80 gig which replaced my 30 gig iPod Photo which just died.

  • "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

    Hi Techys,
    can you give me the suugestions for below error in sharepoint 2010.
    Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
    User having the contribute permission.
    as a admin i can open the document without any error.
    user wants to open the document via online and VPN connection.
    while the user seeing the document info the below error is indicationg .
    Offline Copy, Work book is readonly Mode.
    The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
    Many Thanks,
    Madhu

    Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
    --Cheers

  • I am getting some errors while distilling the post script file.

    I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
    <PDFX ISO="15930-1:2001" COMPLIANT="true">
    PDF/X Compliance Report
    1.  Summary
       Warnings: The total found in this document was 0.
       Violations: The total found in this document was 0.
       No problems were found in the document.
       This document passes PDF/X-1a:2001 compliance checks.
    </PDFX>
    Regards,
    Jack

    @Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
    What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
    To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
    Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
    Uwe

  • TREX 7.0 System AIX 5.3 DB2 Error FCO-00011  The step extractTrexBinaries

    Hi Colleagues,
    In the process 6 of 12 the installation the trex stopped with this error,
    FCO-00011  The step extractTrexBinaries with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|TREX_BINARY_INST|ind|ind|TREX|ind|4|0 |extractTrexBinaries was executed with status ERROR .
    The version the sapinst is last in the sapnet.
    Please Helpppppp Meeeee

    Hi Colleagues,
    I installed the sapinst TREX70_37-20000466.SAR but the error continue.
    Regards Victor.

  • CJS-30059 Java EE Engine configuration error FCO-00011 The step configCAF

    Hallo
    trying to install SAP EHP1 for NW 7.0 Developer Workplace for AS Java (no Abap) I get the error:
    CJS-30059 Java EE Engine configuration error.
    FCO-00011 The step configCAF with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|
    SAP_Software_Features_Configuration|ind|ind|ind|ind|6|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|
    configCAF was executed with status ERROR ( Last error reported by the step :Java EE Engine configuration error.
    DIAGNOSIS: See output of logfile java.log: 'IO EXCEPTION: Connection reset:: '.).
    which is very similar to an error here from October 2008 so I ask if anyone can help?
    For me under windows xp on the pc installing the two sap dvd's "SAP EHP1 FOR SAP NETWEAVER 7.0 Developer Workplace"
    and "Kernel 7.01" this happens in step 33 of 37 steps.
    In sapinst_dev.log just beforehand I see
    "NWCallJava: Arguments passed: ROLE=CAFAdmin, ACTIONS=com.sap.caf.rt.caf.auth".
    With kind regards

    Hi Marco
    well yes it was very strange ... but it is now installed.
    I think I'd better put a question into the main NW forum.
    Happily I have someone here who is a genius and found out what was happening ...
    1) the port 50000 wasnt useable, wasnt even in the log, but 50001 for https worked, so https:/localhost:50001 worked but http didnt;
    2) a parameter "handlePromotionFailure" was used but not understood so the VM couldnt start
    3) on top of that, being a huge concern, we have host names longer than the sap limit of 13 characters.
    I have tried to assign you 6 points I hope it worked.
    With kind regards
    David

  • LSMW, Step - Specify Files option

    Dear Experts,
    Please explain the details at Specify files options in LSMW
    I want to know about following options -
    1) Legacy data on PC (Front end)
    2) Legacy data on the R/3 server (Application Server)
    3) Imported data File for imported data (Application server)
    4) Converted data File for converted data (Application server)
    5) Wild card value Value of wild card ' * * in file name.
    Thanks in advance

    1) Legacy data on PC (Front end)
    -- defines that SAP shall find and upload the source file from your PCs Harddrive (can as well be a network drive)
    2) Legacy data on the R/3 server (Application Server)
    -- defines that the source file is to be found in the file system of your SAP system
    I use this often when we merge SAP systems, so I can send IDOCs from old SAP system to new SAP system and output the IDOCs directly as file. This file can then be found in on the SAP application server. (you can display the SAP directories with AL11 transaction)
    3) Imported data File for imported data (Application server)
    - this is the internal file LSMW writes the data to when it uploads from PC or application server.
    4) Converted data File for converted data (Application server)
    - this is the internal file LSMW writes the data  to when it converts from imported data file using the mapping rules.
    5) Wild card value Value of wild card ' * * in file name.
    - This allows you to use to use the same LSMW for many many similar files (e.g. if you migrate materials and you get extra files from each company) without the need to change the above entered names.

  • Error while deploying the JDI SCA file on the server

    Hi,
    I am not able to deploy the 3 SCA files JDIdevinf, JDI buildt and JDIdeinff.
    When deploying the following error occured.
    ABorted deployment component 'tc CBB Appl/'sap.com'/SAP AG'6.4009.00.0000.200411042045
    Caught exception during application deployment from SAP J2EE ENgine's deploy service.
    java.rmi.RemoteException: Cannot deploy application sap.com.tc.CBB Appl.. Reason: Exception during
    application sap.com/tc.CBB Appl in container EJBContainer; nested exception is
    exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/tc.CBS Appl in container EJBContainer
    (message ID:com.sap.sdn.servlet.servertype.inqny.extern.EngineApplOnlineDEployerImpl.per
    REMEXC)
    Deployment of tc.CBBAppl finished with Error
    How to solve this

    Hi,
    We are using NWDS to create a small application to develop ( for ex jspdynpage)
    .while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
    the server is running and is shown in green.
    we have also  disabled the proxy settings.
    we have also tried by specifiing the IP of the server in the proxy settings.
    the above steps didnt work.please suggest the things to do to make this working.
    thanks,
    rajani.

  • Getting error while reading the positional flat files

    Hi,
    I have a requirement to read a Positional Flat file and convert into XML through oracle B2B. I have created a positional flat file .ecs, XSD and parser .ecs file using the blog http://anuj-dwivedi.blogspot.in/2011/10/handling-positionaldelimited-flat-files.html and updated the same in the server.
    I have created a agreemnt for inbound scenario But while testing the inbound scenario i am getting an error in B2B as :
    Error Code     B2B-50083
    Error Description     Machine Info: Description: Document protocol identification error.
    Error Level     ERROR_LEVEL_COLLABORATION
    Error Severity     ERROR
    Error Text     Document protocol identification error.
    I have tried all the possible ways but getting the same error.
    Please guide me to overcome this.
    Thanks,
    Nishanth

    Nishanth,
    Have you followed the step#2 correctly -
    Copying the parser ecs in the installation directory and adding an entry in XERegistry.xml (of all machines if domain is spanned across multiple machines)
    Also make sure that you have provided Identification Value, Identification Start Position and Identification End Position correctly in Document Defintion. Please remember that start position starts from 1 (instead of 0)
    Regards,
    Anuj

  • Getting error REP-1352: The fonts specified for this report cannot be found

    Dear Friends,
    I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
    REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
    I searched internet and found the reason for the issue i.e., as follows.
    REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
    Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
    Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
    I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
    Please help me ASAP.
    Thanking you.
    With Kind Regards,
    Senthil Alagu .P.

    Check this post of Oracle related to font aliasing
    http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
    Marcos

  • Error while saving the FM8 XML file

    Hello,
    While saving the FM8 XML file, an error message appears (see attached screen shot).
    Is there a solution to resolve this issue? Please suggest.

    Hi,
    This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
    - Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
    - Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
    Russ

  • I purchased the mountain lion and while downloading an error message appear :The product distribution file could not be verified. It may be damaged or was not signed. what i've to do to complete downloading??

    please help me coz i'm anew mac user and i don't have much knowledge about mac system

    how can i skip his error ( The product distribution file could not be verified. It may be damaged or was not signe )
    because it's driving me crazy

Maybe you are looking for