Error LVM on boot

Hi All,
on boot I get the following error on the journal
Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory
I've checked on the net and changed as stated here https://www.archlinux.org/news/changes-to-lvm/
but nothing changed, the error is still there.
can you point me in the right direction?
I did not find any info about this error
thanks

I'm trying to fix a similar problem with bootup. I found a tutorial on boot debugging here:
http://freedesktop.org/wiki/Software/systemd/Debugging/
Let me know if it helps. I still have yet to fix my problem.

Similar Messages

  • Error Message at Boot-Up

    WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
    Any help eliminating this message would be appreciated .

    Hi Bettybee2, and a warm welcome to the forums!
    As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
    http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

  • Error biohd-2 boot path testing no drive detected

    Hi, I have an error massage on boot path testing and says no drive detected. The error code is BIOHD-2. My dard drive and everthying is OK but somehow unable to boot. please help.

    Hello ayaansharif:
                These links might help you http://www.windowserrorhelps.com/biohd-2-error-fix​-error-code-biohd-2-by-yourself-now , http://answers.yahoo.com/question/index?qid=200911​09134242AAVBaGy, http://www.touchsmartdevzone.com/forum/thread/969/​Error-Code-BIOHD-2/ ,http://forums.techguy.org/hardware/948483-solved-h​p-desktop-selecting-proper.html Based on these answers it looks like they replaced the hard drive. Check your warranty status your computer maybe still under warranty. You can go to your computer's HP web page and  click on manual go down your computers parts list and find what hard drive it uses then go to HP's computers parts ordering page and order one. If under warranty just contact HP Direct Support and they will ship you a new hard drive. They are not to difficult to install. Just time consumming removing the little screws. You may need to order a set of recovery disk from HP as well. Because HP's recovery disk include the operating system disks. Please click on Kudos if this resolves your issue. Thank you frrw.

  • Laptop mode -- where to find error messages on boot

    Hi guys,
    I get some error messages when booting. I have the time to read that they are related to laptop-mode, but they quickly disappear.
    I have activated the ENABLE_LAPTOP_MODE_TOOLS in my laptop-mode.conf file, but I can't find the error messages in /var/log :
    /var/log » ll nico@cotier
    total 2152
    -rw-r--r-- 1 root users 24082 20 mars 11:30 Xorg.0.log
    -rw-r--r-- 1 root users 24084 20 mars 10:35 Xorg.0.log.old
    -rw-r--r-- 1 root users 28050 1 juin 2013 Xorg.1.log
    -rw-r--r-- 1 root users 27492 1 juin 2013 Xorg.1.log.old
    -rw-r--r-- 1 root bumblebee 13679 1 juin 2013 Xorg.8.log
    -rw------- 1 root utmp 18816 20 mars 10:18 btmp
    -rw------- 1 root root 32032 20 mars 11:29 faillog
    drwxr-xr-x 2 root root 4096 16 juin 2013 httpd
    drwxr-sr-x+ 3 root systemd-journal 4096 1 juin 2013 journal
    -rw-r--r-- 1 root root 292292 20 mars 11:29 lastlog
    drwxr-xr-x 2 root root 4096 14 mars 2013 old
    -rw-r--r-- 1 root root 159892 19 mars 14:55 pacman.log
    -rw-r--r-- 1 root root 77572 5 oct. 00:47 pm-powersave.log
    -rw-r--r-- 1 root root 3586 1 juin 2013 slim.log
    drwxr-xr-x 2 root root 4096 9 mars 2013 speech-dispatcher
    -rw-rw-r-- 1 root utmp 1745280 20 mars 11:45 wtmp
    Do you know where they might be?
    Thanks!

    grep all these logs and systemd's journal.
    If you have 'quiet' on the kernel line of your bootloader, remove it.
    Last edited by karol (2014-03-20 11:52:42)

  • Getting an error 'Cannot open Boot device' while trying to install Solaris

    Hi,
    We were trying to install Solaris * on a Sun Sparc system and the CD rom drive does not seem to get recognised. When we try booting from cd rom we get an error 'Cannot open boot device' .
    This server was up & running and we were trying to remove a hard disk that had failed and modified the vfstab script . After that the system failed to even boot up. So when we tried reinstalling the OS we are running into this problem.
    Am new to this technology ...And any help would be greatly appreciated. .....
    Thanks

    Cdrom drive must be scsi device 6
    I assume you are running < boot cdrom> at the ok prompt
    also at the ok prompt run the command <probe-scsi> (without the angled brackets) you need to see the following:
    Target 6
    Unit 0 Removable read only device TOSHIBA XM.......bigpileofnumbers
    If not, check the cdrom drive and the cdrom inside
    hope this helps
    Alan

  • New MacMini - System Error on Initial Boot

    I just bought a new Mac Mini 2.5Ghz/Core 2 i5/500GB HDD and instead of initial boot up with stock Mavericks install I cloned my existing Mavericks partition fromm previous MacMini to new HDD but I get a system error message on boot up.    I can run the old Mavericks install from the external drive attached to the new Mac Mini just fine but can't boot from the  internal drive.    I am trying now to do a virgin install of Mavericks downloaded from the app store  but where is it written you must do the inital boot of a new machine from the installed OS?  Don't understand why a clone of Mavericks doesn't work.

    Reinstalling Mavericks worked.   Problem solved.

  • Error messages when booting up

    Receive 3 error messages when booting up PS using Win 8. "Could not load the FastCore Routines Module, could not load the MMX Core, could not load the Multiprocess Support Module." Any explanation?

    Ah-ha! Seems there are two Adobe program folders, one under Program Files and one under Program Files (x86). I did not know about the one under Program Files.
    According to System Info:
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Creative Cloud app keeps wanting to update Photoshop CC but keeps failing. The error code is U44M1P7.
    Following is all of the System Info, showing the third-party plug-ins that I installed a few hours ago from onOne and Topaz. I can't see anything odd in this, and System Info says all the plug-ins loaded.
    Thanks for your help.
    Quote
    Adobe Photoshop Version: 14.1.2 (14.1.2 20130923.r.427 2013/09/23:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 3093 MHz
    Built-in memory: 6088 MB
    Free memory: 4429 MB
    Memory available to Photoshop: 5289 MB
    Memory used by Photoshop: 59 %
    Image tile size: 1024K
    Image cache levels: 4
    Display: 1
    Display Bounds: top=0, left=0, bottom=900, right=1600
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    NumGPUs=1
    gpu[0].OGLVersion="3.0"
    gpu[0].MemoryMB=2108
    gpu[0].RectTextureSize=8192
    gpu[0].Renderer="Intel(R) HD Graphics 2000"
    gpu[0].RendererID=258
    gpu[0].Vendor="Intel"
    gpu[0].VendorID=32902
    gpu[0].HasNPOTSupport=1
    gpu[0].DriverVersion="9.17.10.3347"
    gpu[0].Driver="igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32"
    gpu[0].DriverDate="20131031000000.000000-000"
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLSupported=0
    gpu[0].CUDASupported=0
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Intel Build 9.17.10.3347"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[512]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[41]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
    Serial number: 96040202581963319193
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\
    Temporary file path: C:\Users\RUSSEL~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 1.35T, 1.10T free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Required\Plug-Ins\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\
    Installed components:
       ACE.dll   ACE 2013/07/14-12:09:50   79.543790   79.543790
       adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
       AdobeLinguistic.dll   Adobe Linguisitc Library   7.0.0  
       AdobeOwl.dll   Adobe Owl 2013/03/03-12:10:08   5.0.13   79.533484
       AdobePDFL.dll   PDFL 2013/03/13-12:09:15   79.499517   79.499517
       AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1786  
       AdobeXMP.dll   Adobe XMP Core 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPFiles.dll   Adobe XMP Files 2013/03/13-12:09:15   79.151481   79.151481
       AdobeXMPScript.dll   Adobe XMP Script 2013/03/13-12:09:15   79.151481   79.151481
       adobe_caps.dll   Adobe CAPS   7,0,0,21  
       AGM.dll   AGM 2013/07/14-12:09:50   79.543790   79.543790
       ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31  
       aif_core.dll   AIF   5.0   79.534508
       aif_ocl.dll   AIF   5.0   79.534508
       aif_ogl.dll   AIF   5.0   79.534508
       amtlib.dll   AMTLib (64 Bit)   7.0.0.169 BuildVersion: 7.0; BuildDate: Mon Apr 8 2013 2:31:50)   1.000000
       ARE.dll   ARE 2013/07/14-12:09:50   79.543790   79.543790
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2013/07/14-12:09:50   79.543790   79.543790
       BIBUtils.dll   BIBUtils 2013/03/19-12:09:02   79.535293   79.535293
       boost_date_time.dll   DVA Product   7.0.0  
       boost_signals.dll   DVA Product   7.0.0  
       boost_system.dll   DVA Product   7.0.0  
       boost_threads.dll   DVA Product   7.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.1.6.30929   2.1.6.30929
       CITThreading.dll   Adobe CITThreading   2.1.6.30929   2.1.6.30929
       CoolType.dll   CoolType 2013/07/14-12:09:50   79.543790   79.543790
       dvaaudiodevice.dll   DVA Product   7.0.0  
       dvacore.dll   DVA Product   7.0.0  
       dvamarshal.dll   DVA Product   7.0.0  
       dvamediatypes.dll   DVA Product   7.0.0  
       dvaplayer.dll   DVA Product   7.0.0  
       dvatransport.dll   DVA Product   7.0.0  
       dvaunittesting.dll   DVA Product   7.0.0  
       dynamiclink.dll   DVA Product   7.0.0  
       ExtendScript.dll   ExtendScript 2013/03/21-12:10:31   79.535742   79.535742
       FileInfo.dll   Adobe XMP FileInfo 2013/03/19-12:09:02   79.151561   79.151561
       filter_graph.dll   AIF   5.0   79.534508
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       imslib.dll   IMSLib DLL   7.0.0.116  
       JP2KLib.dll   JP2KLib 2013/02/19-12:28:44   79.248139   79.248139
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libiomp5md.dll   Intel(R) OMP Runtime Library   5.0  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       LogSession.dll   LogSession   2.1.2.1785  
       mediacoreif.dll   DVA Product   7.0.0  
       MPS.dll   MPS 2013/03/15-13:25:52   79.535029   79.535029
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       ONCore7.dll   ONCore   7.0.0.0  
       ONCore8.dll   ONCore   7.0.0.0  
       ONCoreFoundation7.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONCoreFoundation8.dll   ONCoreFoundation7   7, 0, 0, 0  
       ONDocument7.dll   ONDocument   7.0.0.0  
       ONDocument8.dll   ONDocument   7.0.0.0  
       ONProxySupport7.dll   ONProxySupport   1.0.0.0  
       ONProxySupport8.dll   ONProxySupport   1.0.0.0  
       PatchMatch.dll   PatchMatch 2013/06/11-12:08:08   79.542390   79.542390
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CC   CC  
       Plugin.dll   Adobe Photoshop CC   CC  
       PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   4.0.1.34  
       PSArt.dll   Adobe Photoshop CC   CC  
       PSViews.dll   Adobe Photoshop CC   CC  
       SCCore.dll   ScCore 2013/03/21-12:10:31   79.535742   79.535742
       ScriptUIFlex.dll   ScriptUIFlex 2013/03/21-12:10:31   79.535742   79.535742
       svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0  
       tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 1, 2012, 1003  
       updaternotifications.dll   Adobe Updater Notifications Library   7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   7.0.1.102
       WRServices.dll   WRServices Mon Feb 25 2013 16:09:10   Build 0.19078   0.19078
    Required plug-ins:
       3D Studio 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Accented Edges 14.0
       Adaptive Wide Angle 14.0
       Angled Strokes 14.0
       Average 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Bas Relief 14.0
       BMP 14.0
       Camera Raw 8.0
       Camera Raw Filter 8.0
       Chalk & Charcoal 14.0
       Charcoal 14.0
       Chrome 14.0
       Cineon 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Collada 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Color Halftone 14.0
       Colored Pencil 14.0
       CompuServe GIF 14.0
       Conté Crayon 14.0
       Craquelure 14.0
       Crop and Straighten Photos 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Crop and Straighten Photos Filter 14.0
       Crosshatch 14.0
       Crystallize 14.0
       Cutout 14.0
       Dark Strokes 14.0
       De-Interlace 14.0
       Dicom 14.0
       Difference Clouds 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Diffuse Glow 14.0
       Displace 14.0
       Dry Brush 14.0
       Eazel Acquire 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Embed Watermark 4.0
       Entropy 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Extrude 14.0
       FastCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fibers 14.0
       Film Grain 14.0
       Filter Gallery 14.0
       Flash 3D 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Fresco 14.0
       Glass 14.0
       Glowing Edges 14.0
       Google Earth 4 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Grain 14.0
       Graphic Pen 14.0
       Halftone Pattern 14.0
       HDRMergeUI 14.0
       IFF Format 14.0
       Ink Outlines 14.0
       JPEG 2000 14.0
       Kurtosis 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Lens Blur 14.0
       Lens Correction 14.0
       Lens Flare 14.0
       Liquify 14.0
       Matlab Operation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Maximum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mean 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Measurement Core 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Median 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mezzotint 14.0
       Minimum 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       MMXCore Routines 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Mosaic Tiles 14.0
       Multiprocessor Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Neon Glow 14.0
       Note Paper 14.0
       NTSC Colors 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Ocean Ripple 14.0
       Oil Paint 14.0
       OpenEXR 14.0
       Paint Daubs 14.0
       Palette Knife 14.0
       Patchwork 14.0
       Paths to Illustrator 14.0
       PCX 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Photocopy 14.0
       Photoshop 3D Engine 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Picture Package Filter 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Pinch 14.0
       Pixar 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Plaster 14.0
       Plastic Wrap 14.0
       PNG 14.0
       Pointillize 14.0
       Polar Coordinates 14.0
       Portable Bit Map 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Poster Edges 14.0
       Radial Blur 14.0
       Radiance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Range 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Read Watermark 4.0
       Reticulation 14.0
       Ripple 14.0
       Rough Pastels 14.0
       Save for Web 14.0
       ScriptingSupport 14.0
       Shake Reduction 14.0
       Shear 14.0
       Skewness 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Smart Blur 14.0
       Smudge Stick 14.0
       Solarize 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Spatter 14.0
       Spherize 14.0
       Sponge 14.0
       Sprayed Strokes 14.0
       Stained Glass 14.0
       Stamp 14.0
       Standard Deviation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       STL 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Sumi-e 14.0
       Summation 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Targa 14.0
       Texturizer 14.0
       Tiles 14.0
       Torn Edges 14.0
       Twirl 14.0
       Underpainting 14.0
       Vanishing Point 14.0
       Variance 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Variations 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Water Paper 14.0
       Watercolor 14.0
       Wave 14.0
       Wavefront|OBJ 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       WIA Support 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       Wind 14.0
       Wireless Bitmap 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00)
       ZigZag 14.0
    Optional and third party plug-ins:
       Perfect Batch 8 8.1.0
       Perfect BW 8 8.1.0
       Perfect BW 8 Filter 8.1.0
       Perfect BW 8 Smart Filter 8.1.0
       Perfect Effects 4 4.0.4
       Perfect Effects 4 Filter 4.0.4
       Perfect Effects 4 Smart Filter 4.0.4
       Perfect Effects 8 8.1.0
       Perfect Effects 8 Filter 8.1.0
       Perfect Effects 8 Smart Filter 8.1.0
       Perfect Enhance 8 8.1.0
       Perfect Enhance 8 Filter 8.1.0
       Perfect Enhance 8 Smart Filter 8.1.0
       Perfect Mask 8 8.1.0
       Perfect Mask 8 Filter 8.1.0
       Perfect Mask 8 Smart Filter 8.1.0
       Perfect Portrait 8 8.1.0
       Perfect Portrait 8 Filter 8.1.0
       Perfect Portrait 8 Smart Filter 8.1.0
       Perfect Resize 8 8.1.0
       Perfect Resize 8 Engine Automation 8.1.0
       Perfect Resize 8 Engine Filter 8.1.0
       Perfect Resize 8 Filter 8.1.0
       Topaz Adjust 5 10.0
    Plug-ins that failed to load: NONE
    Flash:
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

  • Get Error C0190003 on booting..

    i get this error msg on booting installation.. try to safe mode still cannot load into windows..

    If this happened during the update process, you could follow instructions from the next thread.
    https://social.technet.microsoft.com/Forums/windows/en-US/58ee0e5f-9459-4466-9e6e-c3e7eb3a5c60/fatal-error-c0190003-applying-update-operation-409-of-113102-s?forum=w7itprogeneral

  • Error with dual boot Win 8/OL6 R3

    Hello,
    I am hoping to discuss this with someone who has experience with this configuration. My goal is to get Oracle Linux dual booting on my windows 8 machine.
    I have installed OL but I am having trouble getting it to dual boot win8/OL using the windows boot menu. Whereas windows 8 boots as expected, the Oracle Linux option gives me the error:
    "+Windows failed to start. A recent hardware or software change might be the cause...contact you system administrator or computer manufacturer for assistance+
    +File:+ \NST\nst_linux.mbr
    +Status: 0xc000007b+
    +Info: The selected application or operating system couldn't be loaded because a required file is missing or contains errors.+"
    Here are some details of the scenario:
    - Documentation followed: Red_Hat_Enterprise_Linux-6-Installation_Guide-en-US.pdf
    - Hardware: Dell Precision M4700 64 bit UEFI
    - OEM installed/Default OS: Windows 8 Pro 64 bit
    - Installation source: OracleLinux-R6-U3-Server-x86_64-dvd.iso (written to DVD)
    These are the broad steps I followed:
    In windows 8
    I:
    - downloaded the Linux ISO software. The checksum on the download matched
    - wrote the ISO to a bootable installation disk
    - created a new 344gb partition for Linux using the DOS DISKPART command - partition 7
    Linux Install
    - I booted using the Linux installation DVD and started the installation
    - When Installing Linux partition 7 became a 500mb system partition and partition 8 became the 343 gb Linux partition
    - I manually created the boot partition as ext3 (because the pdf I was following said "+If your 64-bit x86 system uses UEFI instead of BIOS, you will need to manually create a /boot partition. This partition must have an ext3 file system. If you choose to partition automatically, your system will not boot.+"
    - I installed the boot loader on sda7. I selected “First sector of boot partition - /dev/sda7”. I assume this installs separate GRUB boot loader on the Linux partition (7) – which will then be 'chain loaded' from the windows boot menu. Put another way, it will boot with the windows boot manager, which will give me an option to chain load the Grub boot loader, which will then run Linux...
    - I chose the desktop installation
    - The installation reported that it completed successfully
    I successfully booted back into windows:
    - I used easybcd to edit the microsoft bcd and successfully created a boot menu for Oracle Linux. I used the legacy grub because the Linux documentation says "+Note that the version of GRUB in Red Hat Enterprise Linux 6 is an old and stable version now known as "GRUB Legacy" since upstream development moved to GRUB 2.3 Red Hat remains committed to maintaining the version of GRUB that we ship with Red Hat Enterprise Linux 6, just as we do with all packages that we ship.+".
    - After installing Linux and updating the BCD, the BCD now looks like this:
    Windows Boot Manager
    identifier {bootmgr}
    path \EFI\Microsoft\Boot\bootmgfw.efi
    description Windows Boot Manager
    locale en-US
    inherit {globalsettings}
    integrityservices Enable
    default {current}
    resumeobject {2b56acdd-8bbe-11e2-9ba6-b8ca3ad88679}
    displayorder {current}
    {524cc0d3-8bce-11e2-935f-b8ca3ad88679}
    toolsdisplayorder {memdiag}
    timeout 30
    Windows Boot Loader
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.efi
    description Windows 8
    locale en-US
    inherit {bootloadersettings}
    recoverysequence {524cc0d1-8bce-11e2-935f-b8ca3ad88679}
    integrityservices Enable
    recoveryenabled Yes
    isolatedcontext Yes
    allowedinmemorysettings 0x15000075
    osdevice partition=C:
    systemroot \Windows
    resumeobject {2b56acdd-8bbe-11e2-9ba6-b8ca3ad88679}
    nx OptIn
    bootmenupolicy Standard
    Real-mode Boot Sector
    identifier {524cc0d3-8bce-11e2-935f-b8ca3ad88679}
    device partition=C:
    path \NST\nst_linux.mbr
    description OracleLinux
    I'm not sure the BCD entry is correct. I assume that this entry should be pointing to the nst_linux.mbr on the Linux boot partition. However I have verified that this file exists in windows 8:
    C:\NST\nst_linux.mbr
    I haven't been able to exactly confirm how the boot process should work i.e. whether this file should actually be in the Linux boot partition (as opposed to the windows c drive) and whether the BCD should also point to the Linux boot partition when referring to this partition.
    As I mentioned above, I now have the windows boot menu with Windows 8 (which boots successfully) and Oracle Linux (which gives me the error see below for complete wording**). Is the Real-mode Boot sector wrong? Should it point to the Linux boot partition? Is it a problem with my UEFI disk? I don't think it should be because this version of Oracle Linux supports UEFI and my hardware is UEFI.
    Has anyone carried out a similar win8/OL dual boot?
    2001
    ** Complete wording of the Linux boot option in the windows boot manager:
    Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows installation disk and restart the computer.
    2. Choose your language settings, and then click "next".
    3. Click "Repair your computer".
    If you do not have this disk, contact you system administrator or computer manufacturer for assistance
    File: \NST\nst_linux.mbr
    Status: 0xc000007b
    Info: The selected application or operating system couldn’t be loaded because a required file is missing or contains errors.
    Edited by: 2001 on Apr 1, 2013 4:27 PM
    Edited by: 2001 on Apr 17, 2013 5:17 PM

    Hi,
    Here are my responses:
    *[asmirnov]* Could you please confirm, I just want to see if I got it right the first time -
    *[2001]* I'm happy to share my progress
    Q1)
    *[asmirnov]* You did create a partition (where you would install Linux) from Win8, correct?
    *[2001]* Yes. I used diskmgmt.msc to create a separate partition. I didn't format the partition because the Linux install doesn't want that, it creates and formats the partitions in the unallocated partition
    Q2)
    *[asmirnov]* You use GRUB (not GRUB2)?
    *[2001]* I'm not sure where you were asking about, so I hope my answer here covers all possibilities you may have meant.
    I was using the windows 8 boot. I wanted to chain load to the boot loader in the Linux Partition. It is interesting what the Linux install did with my partition, it created 2 partitions in the unformatted partition. 1 was a bootable partition and the other was the Linux partition. The details were:
    2 sda’s (a boot / ext4 and a VolGroup (vg_linuxlocalhost)/ physical volume (LVM) ). In the VolGroup it created 3 lv’s, lv_root, lv_home and lv_swap. I understand that this is all normal.
    I followed the documentation note which said "To configure the Red Hat Enterprise Linux boot loader to chain load from a different boot loader, you must specify the boot drive manually. If you chose any of the automatic partitioning options, you must now select the Review and modify partitioning layout option before you click Next or you cannot specify the correct boot drive"
    So there was also the note in the documentation that said "Note that the version of GRUB in Red Hat Enterprise Linux 6 is an old and stable version now known as "GRUB Legacy" since upstream development moved to GRUB 2.3 Red Hat remains committed to maintaining the version of GRUB that we ship with Red Hat Enterprise Linux 6, just as we do with all packages that we ship." I didn't install any bootloaders manually (either the windows 8 OOTB default that came with my machine or the Linux one), I just took the defaults. I'm wasn't sure how to access the Linux partitions once it is installed, so I can't confirm it was the legacy GRUB in the Linux boot partition, but I believe this note is saying that it OL6 does use the legacy grub. I believe GRUB Legacy is version .97.
    Q3)
    *[asmirnov]* Which version of Linux exactly did you use, was that Oracle Linux or you used one from RedHat directly? What is the kernal version?
    *[2001]* I used "OracleLinux-R6-U3-Server-x86_64-dvd.iso.sha1sum" from the mirror site http://mirror.aarnet.edu.au/pub/oraclelinux/OL6/U3/x86_64/. According to the release notes at: https://oss.oracle.com/ol6/docs/RELEASE-NOTES-U3-en.html the kernel is
    - Unbreakable Enterprise Kernel Release 2 [kernel-uek-2.6.39-200.24.1.el6uek]. Installed and booted by default
    - Red Hat compatible Kernel [kernel-2.6.32-279.el6]. Installed by default
    Note: By default, both the Unbreakable Enterprise Kernel and the Red Hat Compatible Kernel for the specific architecture (i386 or x86_64) are installed, and the system boots the Unbreakable Enterprise Kernel by default. If needed, /etc/grub.conf and /etc/sysconfig/kernel can be modified to make the system boot with the Red Hat Compatible Kernel by default.
    Regarding your follow-up point that "Microsoft blocks 3rd party chainloaders from the BCD menu for UEFI machines. We are researching workarounds, none have presented themselves as of yet.", I'm not sure it actually blocks it, but it certainly isn't a straight forward process.
    I have actually abandoned my attempt to get the dual boot working. It is a real shame because I wanted to do it for my own satisfaction.
    I am now using Oracle Virtual Box as suggested by others, include Dude earlier in this thread. This has given me confidence that I was doing all the right things because the install worked first time without any problems. The virtualization is much simpler and I have had no problems so far.
    Fusion
    As for your point about the fusion middleware and OL5. I am looking at Oracle SOA with is part of the Fusion brand. I think that the latest SOA components will work on OL6 - but I have yet to try it. Following the certification matrix can be a little difficult. So as I indicated above, my current thoughts are to use the Oracle Virtual Box with Linux r6 u3 and to install the SOA components on that when I get chance. The alternative is using the pre-built virtual machine it has Linux and SOA (it might cover your stack too, or there may be another one that suits you better on the site) http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html. Note that this is still on OL5.
    I hope this helps.

  • Syslinux, GPT, RAID 0/1, LVM: Successfully boots, then hangs/crashes

    I have a system with two hard drives that were initially zeroed-out (sda and sdb).  I'm trying to do an Arch install with Syslinux, GPT partitioning, RAID1 (/boot and swap), and RAID0 (LVM for / and /home).  I can get my install to boot successfully but after I enter my username (root) and password (hunter2) it's completely usable until it seems to hang (sometimes shifting the display) moments later.
    Here's my best recreation of my installation steps.  Hopefully you can tell me what I'm doing wrong or how I can troubleshoot further.
    # Partitioning
    gdisk /dev/sda
    gdisk /dev/sdb
    # I configure the partition table identically on sda and sdb:
    # # Flags Type Size
    # 1 Boot FD00 128 MB # /boot
    # 2 FD00 2 GB # swap
    # 3 FD00 Remaining space (~ 253 GB) # LVM for / and /home
    # Load kernel modules
    modprobe dm-mod
    modprobe raid0
    modprobe raid1
    ## RAID
    mdadm --create /dev/md1 --level=1 --raid-devices=2 --metadata=1.0 /dev/sd[ab]1 # Create RAID1 for /boot
    mdadm --create /dev/md2 --level=1 --raid-devices=2 /dev/sd[ab]2 # Create RAID1 for swap
    mdadm --create /dev/md3 --level=0 --raid-devices=2 /dev/sd[ab]3 # Create RAID0 for LVM for / and /home
    ## LVM
    pvcreate /dev/md3 # Initialize /dev/md3 for LVM
    vgcreate VolGroup00 /dev/md3 # Create VolGroup00 VG
    lvcreate -L 10G VolGroup00 -n lvroot # Create LV for /
    lvcreate -L 10G VolGroup00 -n lvhome # Create LV for /home
    # Formatting
    mkfs.ext2 /dev/md1 # Create ext2 file system for /boot
    mkswap /dev/md2 # Create swap device
    mkfs.ext4 /dev/mapper/VolGroup00-lvroot # Create ext4 file system for /
    mkfs.ext4 /dev/mapper/VolGroup00-lvhome # Create ext4 file system for /home
    # Mount the partitions
    mount /dev/mapper/VolGroup00-lvroot /mnt
    mkdir /mnt/boot
    mount /dev/md1 /mnt/boot
    mkdir /mnt/home
    mount /dev/mapper/VolGroup00-lvhome /mnt/home
    # Connect to the internet (skip; DHCP worked)
    # Install the base system
    pacstrap /mnt base base-devel vim
    # Install a bootloader
    arch-chroot /mnt pacman -S syslinux
    # Configure the system
    genfstab -pU /mnt >> /mnt/etc/fstab
    arch-chroot /mnt /bin/bash
    echo swamp > /etc/hostname
    ln -s /usr/share/zoneinfo/America/Chicago /etc/localtime
    locale > /etc/locale.conf
    # I fix a few minor things in /etc/locale.conf so they are all set like LC_ALL="en_US.UTF-8"
    echo "KEYMAP=us" > /etc/vconsole.conf
    # I uncomment en_US.UTF-8 UTF-8 in /etc/locale.gen
    locale-gen
    # I make these changes to /etc/mkinitcpio.conf:
    # MODULES="ext2 ext4 raid0 raid1 dm_mod"
    # HOOKS="base udev autodetect modconf block mdadm_udev lvm2 filesystems keyboard fsck shutdown"
    mkinitcpio -p linux
    syslinux-install_update -iam
    # I change the APPEND lines in /boot/syslinux/syslinux.cfg from:
    # APPEND root=/dev/sda3 ro
    # ... to:
    # APPEND root=/dev/mapper/VolGroup00-lvroot ro
    # Unmount and reboot
    exit
    umount /mnt/boot
    umount /mnt/home
    umount /mnt
    vgchange -an
    mdadm --stop /dev/md3
    mdadm --stop /dev/md2
    mdadm --stop /dev/md1
    reboot
    Last edited by roknir (2013-02-20 04:50:18)

    WonderWoofy wrote:Can you chroot and find out what is in the journal?  You may not even have to chroot, as I think you can simply use the -D option.
    Interesting.  I didn't know about the systemd logging.  I'm glad it's on by default.  Here is the excerpt:
    Feb 19 21:39:40 swamp systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
    Feb 19 21:39:40 swamp systemd[1]: Starting Permit User Sessions...
    Feb 19 21:39:40 swamp systemd[1]: Started Login Service.
    Feb 19 21:39:40 swamp systemd[1]: Started Permit User Sessions.
    Feb 19 21:39:40 swamp systemd[1]: Starting Getty on tty1...
    Feb 19 21:39:40 swamp systemd[1]: Started Getty on tty1.
    Feb 19 21:39:40 swamp systemd[1]: Starting Login Prompts.
    Feb 19 21:39:40 swamp systemd[1]: Reached target Login Prompts.
    Feb 19 21:39:40 swamp systemd[1]: Starting Multi-User.
    Feb 19 21:39:40 swamp systemd[1]: Reached target Multi-User.
    Feb 19 21:39:40 swamp systemd[1]: Starting Graphical Interface.
    Feb 19 21:39:40 swamp systemd[1]: Reached target Graphical Interface.
    Feb 19 21:39:40 swamp systemd[1]: Starting Update UTMP about System Runlevel Changes...
    Feb 19 21:39:40 swamp systemd[1]: Started Update UTMP about System Runlevel Changes.
    Feb 19 21:39:40 swamp systemd[1]: Startup finished in 1s 201ms 384us (kernel) + 1s 125ms 388us (userspace) = 2s 326ms 772us.
    Feb 19 21:39:42 swamp login[357]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Feb 19 21:39:42 swamp systemd-logind[353]: New session 1 of user root.
    Feb 19 21:39:43 swamp login[357]: ROOT LOGIN ON tty1
    Feb 19 21:39:45 swamp kernel: usb 2-1.2.2: new full-speed USB device number 5 using ehci_hcd
    Feb 19 21:39:45 swamp kernel: input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/in
    Feb 19 21:39:45 swamp kernel: hid-generic 0003:046D:C066.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-000
    Feb 19 21:39:45 swamp kernel: input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.1/in
    Feb 19 21:39:45 swamp kernel: hid-generic 0003:046D:C066.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse]
    Feb 19 21:39:56 swamp kernel: Console: switching to colour frame buffer device 128x48
    Feb 19 21:39:56 swamp kernel: fb0: astdrmfb frame buffer device
    Feb 19 21:39:56 swamp kernel: drm: registered panic notifier
    Feb 19 21:39:56 swamp kernel: [drm] Initialized ast 0.1.0 20120228 for 0000:06:05.0 on minor 0
    Feb 19 21:39:56 swamp kernel: nouveau ![ DEVICE][0000:01:00.0] unknown Kepler chipset
    Feb 19 21:39:56 swamp kernel: nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x0e6060a1
    Feb 19 21:39:56 swamp kernel: nouveau E[ DRM] failed to create 0x80000080, -22
    Feb 19 21:39:56 swamp kernel: nouveau: probe of 0000:01:00.0 failed with error -22
    Feb 19 21:39:56 swamp systemd-udevd[217]: Failed to apply ACL on /dev/dri/card1: No such file or directory
    Feb 19 21:39:56 swamp systemd-udevd[217]: Failed to apply ACL on /dev/dri/card1: No such file or directory
    Feb 19 21:40:34 swamp systemd-logind[353]: Power key pressed.
    Feb 19 21:40:34 swamp systemd-logind[353]: Powering Off...
    Feb 19 21:40:34 swamp systemd-logind[353]: System is powering down.
    Feb 19 21:40:34 swamp systemd[1]: Stopping Sound Card.
    Feb 19 21:40:34 swamp systemd[1]: Stopped target Sound Card.
    Feb 19 21:40:34 swamp systemd[1]: Stopping LVM2 metadata daemon...
    I think these are the pertinent errors:
    Feb 19 21:39:56 swamp kernel: nouveau ![ DEVICE][0000:01:00.0] unknown Kepler chipset
    Feb 19 21:39:56 swamp kernel: nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x0e6060a1
    Feb 19 21:39:56 swamp kernel: nouveau E[ DRM] failed to create 0x80000080, -22
    Feb 19 21:39:56 swamp kernel: nouveau: probe of 0000:01:00.0 failed with error -22
    Feb 19 21:39:56 swamp systemd-udevd[217]: Failed to apply ACL on /dev/dri/card1: No such file or directory
    Feb 19 21:39:56 swamp systemd-udevd[217]: Failed to apply ACL on /dev/dri/card1: No such file or directory
    Where do I go from there?

  • Screen splitting error and red boot screen

    Hi, I was using my macbook pro just now and the screen started to glitch and show black vertical bars and the displayed image was split up. I tried to see if there's an unresponsive program that i can force quit then the screen just turned grey and was stuck there.
    I then manually restarted the mac, it prompted me with a press button to continue booting up screen then it was stuck on the grey screen again.
    I tried to start in safe mode then it booted with a red screen and i believed did a system check. But I'm not sure. It then got stuck on the grey screen again.
    I rebooted the machine manually and then now it booted up fine.
    It has happened twice before. Once the split screen issue was solved by quitting Spotify and the second time similar events happened as described above.
    I have previously taken the mac to the genius bar and they ran a hardware check and found that everything was fine. Since I couldn't reproduce the error whilst being in the store they said there was nothing they could do.
    Update:
    The screen splitting issue has occurred at least twice since the event happened above. I have managed to collect another problem report which i can show in addition to the first one.
    I believe that there is a problem with the dedicated graphics card since whenever i use gfxCardStatus to switch to the AMD Radeon HD 6490M graphics card the screen splitting problem occurs. The problem also occurs when the machine automatically switches to the dedicated graphics card with things like Spotify, Google maps and other more intensive applications. Moreover, the second time the problem occurred when i was streaming a TV show and gfxCardStatus showed that the machine has switched to the dedicated Radeon card.
    I'm not sure what i can do about it right now other than trying not to use the dedicated graphics card.  Any help would be very much appreciated, thanks!
    If it helps, I've upgraded the ram myself previously. But that was a few years ago and didn't show any problems when i first installed it.
    It is an early 2011 Macbook Pro with OS X Mavericks 10.9.4
    The split screen issue looks like this:
    Apologies for the rotated image I don't know how to rotate it on the site.
    It also appears identical to the one shown here, three posts down: https://discussions.apple.com/message/15920113
    The problem report of the first event is shown here:
    Anonymous UUID: 81B375DF-0157-0360-53AE-96FF39CBAC4B
    Wed Jul 2 01:41:51 2014
    Machine-check capabilities: 0x0000000000000c09
    family: 6 model: 42 stepping: 7 microcode: 40
    signature: 0x206a7
    Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
    9 error-reporting banks
    Processor 0: IA32_MCG_STATUS: 0x0000000000000004
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    Processor 1: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    Processor 2: IA32_MCG_STATUS: 0x0000000000000004
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    Processor 3: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    Processor 4: IA32_MCG_STATUS: 0x0000000000000004
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    Processor 5: IA32_MCG_STATUS: 0x0000000000000005
    IA32_MC3_STATUS(0x40d): 0xbe00000000800400
    IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
    IA32_MC3_MISC(0x40f): 0x000000000003ffff
    panic(cpu 4 caller 0xffffff800ecdcad9): "Machine Check at 0xffffff7f90a09905, registers:\n" "CR0: 0x000000008001003b, CR2: 0x00000001089ba000, CR3: 0x0000000011ba1000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff8119485100, RBX: 0xffffff8021c65c00, RCX: 0x0000000000002833, RDX: 0xffffff8021c74c80\n" "RSP: 0xffffff811ab1bed0, RBP: 0xffffff811ab1bf10, RSI: 0x000000001dcd64ff, RDI: 0xffffff8021c65c00\n" "R8: 0xffffff8111bfd078, R9: 0x0000000000000000, R10: 0xffffff811ab1be20, R11: 0x0000000000000200\n" "R12: 0x00000000ffffffff, R13: 0x00000000ffffffff, R14: 0x0000000000000000, R15: 0x0000000000400001\n" "RFL: 0x0000000000010246, RIP: 0xffffff7f90a09905, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/trap_native.c :168
    Backtrace (CPU 4), Frame : Return Address
    0xffffff8111bede80 : 0xffffff800ec22f79
    0xffffff8111bedf00 : 0xffffff800ecdcad9
    0xffffff8111bee060 : 0xffffff800ecf3fef
    0xffffff811ab1bf10 : 0xffffff7f90a0c023
    0xffffff811ab1bf30 : 0xffffff800f0af292
    0xffffff811ab1bf80 : 0xffffff800f0af367
    0xffffff811ab1bfb0 : 0xffffff800ecd7417
    Kernel Extensions in backtrace:
    com.apple.driver.AppleAHCIPort(3.0.5)[7F56F309-28C2-342A-82C0-3908C164EBCC]@0xf fffff7f90a02000->0xffffff7f90a1bfff
    dependency: com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f8fd72000
    dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f8f27c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide: 0x000000000ea00000
    Kernel text base: 0xffffff800ec00000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 117766305248
    last loaded kext at 88599052330: com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28 (addr 0xffffff7f914ef000, size 94208)
    loaded kexts:
    com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
    com.orderedbytes.driver.ControllerMateFamily 4.4.3
    com.orderedbytes.driver.CMUSBDevices 4.4.3
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AudioAUUC 1.60
    com.apple.macos.driver.AppleUSBEthernetHost 7.0
    com.apple.driver.AppleTyMCEDriver 1.0.2d2
    com.apple.driver.AGPM 100.14.28
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleHWAccess 1
    com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.ApplePolicyControl 3.6.22
    com.apple.kext.AMDFramebuffer 1.2.4
    com.apple.driver.AppleIntelMCEReporter 104
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.AppleBacklight 170.3.5
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.AMDRadeonX3000 1.2.4
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleMuxControl 3.6.22
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.kext.AMD6000Controller 1.2.4
    com.apple.driver.AppleIntelHD3000Graphics 8.2.4
    com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
    com.apple.driver.AppleThunderboltIP 1.1.2
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyEventDriver 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.driver.AppleFileSystemDriver 3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleSDXC 1.5.2
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleUSBUHCI 656.4.1
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.kext.triggers 1.0
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IOAcceleratorFamily 98.22
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.AppleGraphicsControl 3.6.22
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.kext.AMDSupport 1.2.4
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.AppleThunderboltEDMSink 2.1.3
    com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.driver.AppleThunderboltNHI 2.0.1
    com.apple.iokit.IOThunderboltFamily 3.3.1
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.pthread 1
    com.apple.kec.corecrypto 1.0
    Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
    Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Hub
    USB Device: IR Receiver
    Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

    You might try removing these 3rd party applications and see if there is an improvement.
    com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
    com.orderedbytes.driver.ControllerMateFamily 4.4.3
    com.orderedbytes.driver.CMUSBDevices 4.4.3

  • CS3 Premiere error 0xc0000409 on boot-up no matter how many times I install

    It wasn't easy finding this forum place but anyway I hope you can help me out
    first off I use Windows XP and it is CS3 Premiere Pro I am talking about of the Master Suite, second off I am not English and because my error was displayed in Dutch I have tried to make a translation that was as accurate as I could.
    Well how it started, Premiere was working fine one morning, I have been using it for about a year no errors nothing with any of my products however when I came back from school one day and decided to rip some audio for a school assignment it started crashing on boot up without giving me any indication to why it was doing this, the purple block came up and when it was done windows popped up with the message that the application had to be terminated and that was it..
    So I tried to reinstall and afterwards my After Effects joined in on the fun with the Virtual Function Call and library errors, Premiere had no changes in it at all. So I tried again and then After Effects complained about not being able to unpack the effects and this went on for 5 hours afterwards with every reinstall I would either have the virtual memory plus or the unable to unpack fileformats and effects error..
    I scanned my pc for viruses, zero were found, I tried system restore but that failed because there weren't any changes made to the system and so I called a repair man who took my computer away and took a look at it himself, he installed the master suite again and now After Effects works again however Premiere says this when it starts up
    an exception unknown exception in software (0xc0000409) has occurred in the application on location 0x06ad5389
    the beginning part made me laugh a little and I just tried to use a different setup and tried to trial version however that one as well results with the same error message as labelled above and I fear that every time I install it this will happen..
    So could anyone care tell me wth is going on?

    okay I'll work off the list:
    1. the proble: listed above int he opening post
    2. hardware:
    system: Windows XP Home Edition Service pack 3
    Computer:
    Intel(R) Core(TM)2 Duo CPU
    E6750@ 2.66 Ghz
    Ram and work memory: 2.13 Ghz and 2.00 GB
    vid card: NVIDIA GeForce 8500 GT
    current driver version: 6.14.11.6921
    3. project settings, I didn't save the project but it was a Pal and I only imported an audio file and navigated through it nothing else:
    Codec: 0x0161 (WMA v2)
    after that my premiere started crashing with the "this application had to be shut down error" and when reinstalling it wouldn't go away and then After Effects started erroring with the Virtual stuff followed by unable to unpack effects so I checked for virusses, tried System restore but both had no effect because there were no virusses and no changes were made to the system. So I send my pc to repairs and they were reinstalled it and told me there was nothing wrong with my system and so I tried to boot up Premiere again btu I got this error now, After Effects however works fine I must add
    I tried reinstalling on a different drive but it doesn't help..
    4. See what I wrote at step 3
    5. http://www.mediafire.com/download.php?q2miyoowlyb
    for the DXDIAG TXT file
    6. http://www.mediafire.com/download.php?xlq2t33y25u
    for the NFO file from MSINFO32
    7. Process Explorer:
    made 2 screenshots so that the list will fit
    http://www.mediafire.com/download.php?5zdmynjmztm
    http://www.mediafire.com/download.php?5zdmynjmztm
    8. Speedfan:
    http://www.mediafire.com/download.php?nzitoj2uj3u
    I assume this screenshot contains the results
    all the above files can also be found in this folder
    http://www.mediafire.com/?sharekey=41c749ab86c8473ed6baebe61b361f7ce04e75f6e8ebb871
    Decided to upload the screens there too because photobucket resized them to unreadable size and Imageshack took too long

  • Error while Creating Boot Media - SMS_Site.SubmitRegistrationRecord

    Hello,
    I am struggling to get some Boot Media created in SCCM 2012 R2. I import the correct .pfx Certificate and I am able to select the Management Point/s.
    My account has been given Role Based access to this SCCM instance. On our test SCCM instance I am a Full Administrator and do not get this problem creating Boot Media.
    Any advice please?
    <![LOG[===========================================]LOG]!><time="09:42:37.445-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:476">
     <![LOG[  Beginning writing pass]LOG]!><time="09:42:37.445-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:484">
     <![LOG[===========================================]LOG]!><time="09:42:37.445-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:487">
     <![LOG[Setting up new volume]LOG]!><time="09:42:37.445-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:1297">
     <![LOG[Max file size = 4095 Mb]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:495">
     <![LOG[Size available  = 8796093022170 Mb, size required = 401 Mb]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:509">
     <![LOG[-------------------------------------------]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:610">
     <![LOG[Staging boot image package P01002EC]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:611">
     <![LOG[Target architecture for CD's filesystem will be x64]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="stagebootimagepackage.cpp:90">
     <![LOG[Staging boot image from C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\Cache\P01002EC\WinPE.P01002EC.wim...]LOG]!><time="09:42:37.505-60" date="09-26-2014" component="CreateTsMedia" context=""
    type="1" thread="5700" file="bootimage.cpp:824">
     <![LOG[Loaded C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\x86\DISM\wimgapi.dll]LOG]!><time="09:42:37.700-60" date="09-26-2014" component="CreateTsMedia" context=""
    type="1" thread="5700" file="wimfile.cpp:334">
     <![LOG[Opening image file C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\sources\boot.wim]LOG]!><time="09:42:37.700-60" date="09-26-2014" component="CreateTsMedia" context="" type="1"
    thread="5700" file="wimfile.cpp:412">
     <![LOG[Applying image 1 to volume C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\BootImageTemp]LOG]!><time="09:42:37.703-60" date="09-26-2014" component="CreateTsMedia" context="" type="1"
    thread="5700" file="wimfile.cpp:603">
     <![LOG[Closing image file C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\sources\boot.wim]LOG]!><time="09:42:38.472-60" date="09-26-2014" component="CreateTsMedia" context="" type="1"
    thread="5700" file="wimfile.cpp:448">
     <![LOG[BootLoader::restore: C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\BootImageTemp, C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage]LOG]!><time="09:42:56.877-60" date="09-26-2014" component="CreateTsMedia"
    context="" type="1" thread="5700" file="bootloader.cpp:382">
     <![LOG[Copied C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\EFI\Microsoft\Boot\bootmgfw.efi to C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\EFI\Boot\bootx64.efi]LOG]!><time="09:42:57.044-60" date="09-26-2014"
    component="CreateTsMedia" context="" type="1" thread="5700" file="bootsystem.cpp:1815">
     <![LOG[Copied C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\EFI\Microsoft\Boot\bootmgfw.efi to C:\Users\%USERNAME%\AppData\Local\Temp\_tsmedia_5700\stage\EFI\Boot\bootia32.efi]LOG]!><time="09:42:57.045-60" date="09-26-2014"
    component="CreateTsMedia" context="" type="1" thread="5700" file="bootsystem.cpp:1815">
     <![LOG[Successfully staged files to make media bootable]LOG]!><time="09:42:57.045-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="bootsystem.cpp:1822">
     <![LOG[State has been executed.]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:622">
     <![LOG[-------------------------------------------]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:630">
     <![LOG[Size available  = 8796093021769 Mb, size required = 0 Mb]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:509">
     <![LOG[-------------------------------------------]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:610">
     <![LOG[Staging base files]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:611">
     <![LOG[StageBaseFiles::Execute()]LOG]!><time="09:42:57.046-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="stagebasefiles.cpp:562">
     <![LOG[TsmBootstrap.ini written]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="stagebasefiles.cpp:332">
     <![LOG[State has been executed.]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:622">
     <![LOG[-------------------------------------------]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:630">
     <![LOG[Size available  = 8796093021769 Mb, size required = 0 Mb]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:509">
     <![LOG[-------------------------------------------]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:610">
     <![LOG[Staging certificate]LOG]!><time="09:42:57.048-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:611">
     <![LOG[Error invoking WMI method SMS_Site.SubmitRegistrationRecord (0x80041001)]LOG]!><time="09:42:57.894-60" date="09-26-2014" component="CreateTsMedia" context="" type="3" thread="5700"
    file="stagecertificate.cpp:793">
     <![LOG[Failed to create media (0x80041001)]LOG]!><time="09:42:57.894-60" date="09-26-2014" component="CreateTsMedia" context="" type="3" thread="5700" file="createtsmedia.cpp:345">
     <![LOG[CreateTsMedia failed with error 0x80041001, details='']LOG]!><time="09:42:57.894-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="createtsmedia.cpp:355">
     <![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="09:42:57.894-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="5700" file="mediagenerator.cpp:396">
     <![LOG[Media creation process that was started from Admin Console completed.
     ]LOG]!><time="09:42:58.079-60" date="09-26-2014" component="CreateTsMedia" context="" type="1" thread="14864" file="createmedia.cpp:1065">
     <![LOG[CreateMedia.exe finished with error code 80041001]LOG]!><time="09:42:58.079-60" date="09-26-2014" component="CreateTsMedia" context="" type="2" thread="14864" file="createmedia.cpp:1123">

    Hi,
    Have you seen this thread below:
    Cannot Create Task Sequence Boot Media
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/6077b73c-b411-4f2b-a39d-cc189ab3c6c5/cannot-create-task-sequence-boot-media?forum=configmgrosd
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Win7 can't boot in USB hard drive blue screen 7b error,but can boot when use PD8

    Install Win7 64bit in a USB hard drive through some tools,when start windows the microsoft logo appear,get blue screen.
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    problem has been detected and windows has been shut down to prevent  damage to your computer.If  this is the first you've seen this stop  error screen restart your computer .If this screen appears again.follow these steps:Check for viruses on  your computer.Remove any newly hard drives or hard drive  controllers.Check your hard drive to make sure it is  properly.Configured and terminated.Run DCHKDSK/F to check for hard  drive corrption,and then restart your computer.
    Technical:
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    But when use Parallels Desktop 8 My boot camp ,the win7 can boot normally.
    Any solution?
    Thank you.

    Hi,
    If this issue is related with firmare, then it's recommend to contact the vender\manufacture, if you got any update of this issue, we'd be appreciate that you could share your experience with us.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Getting weird error message when booting up our computer

    when booting up our iMac, we get a gray screen with an error message in 4 languages saying: "you need to restart your computer"
    upon restarting, we keep getting the same message.
    at the same time we noticed that the screen was very fuzzy... I re-starting holding commandoption+pr to re-set the pram. that worked to get the screen clear, but i still ended up on the same message.
    after a few re-starts, the screen went back to the fuzzy view.
    I have also already checked the led lights on the back to assure that the power supply was working appropriately, and i got all 3 lights ON and solid. the 4th light (overheating) was not coming on...
    any ideas or recommendations??
    Tks
    Leo

    What you are seeing is called a 'Kernal Panic'.
    What is a Kernel Panic?
    http://docs.info.apple.com/article.html?artnum=106227
    Try this:
    Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417

Maybe you are looking for

  • MBP Bootcamp install of USB Windows 7 , Thunderbolt Display

    We need support from APPLE! BootCamp Here are my issues. Like many users, I must abandon the marvelous os x, and head to the darkside -  Windows 7 for work. I have a MBP early 2011. I must use Bootcamp, because of the resource hogging the 3d CAD prog

  • Group Level Data Level Security not working

    I'm trying to test the data level security at the group level. Here's what I did 1. Went to the security -> Groups -> Permissions -> Filters 2. In Name added the Fact table on which I want to filter. 3. Selected "Enable" 4. In Filter Column I added a

  • How to start oc4j 1.0.2.2.1

    it is stopped, but i don't know how to start it.

  • How to define endpoint for SessionBeans webservice in OC4J 10.1.3.1?

    Hi Gurus, I am trying to find solution for defining endpoint in HTTP/SOAP webservice created from SessionBeans based on annotations JSR-181. My problem is that I have cluster of J2EE nodes where my webservice is deployed and each node has its own hos

  • Oracle BAM Installation

    Hi All,   I want to install Oracle BAM without Oracle SOA suite. Planning to use ODI to feed BAM. Is it possible to install BAM without SOA Suite? Docs for ODI and BAM integration? Regards, Nataraj R.