Error M7021 in tranx.LI21

Hi experts,
When execute LI21 tranx. and try to "write off", the error M7021 arise (Shortfall below the specified stock level or quantity amounting to 9 UN.)
In MMBE : Stock available (95,000 unrestricted use)
In LS24 tranx. for material/ batch: Stock: 9 UN.
Here i see negative stock but for a different storage type, this is the origin of the error?, though negative stock is set for different storage type?
There isnu2019t any transfer order pending to confirm.
In OMCQ u201CWu201D Warning is set for this message type.
It is possible to solve the error with LT01? u2026maybe MIGO?
Thanks a lot!

In MB51 quantiy in UnE  is u201C0u201D.
??? MB51 is list of material movements, UnE is unit of entry, what do you want to say with that info? did you mix this with MB52 stock list?
There arenu2019t any TO pending to confirm in LT24
WM can be customized to automatically create and  confirm TOs
You have to find the TO that belong to your 501 movement, only then you can say whether it is moved and confirmed or not even created.
Can I clear differences through LT01 
Not really, as LT01 is create transport order. so you can only create a TO to move goods from A to B. However such movement may clear some stock situations that looked like differences. But these are only differences within WM, one bin has more and another bin less quantity, this is not a difference between WM and IM.
  or enter goods receipt through MB1C and then u201CClear differencesu201D with LX23?
Any movement in IM that hits the warehouse managed location  will create stock in the interim storage type and a transfer request. So a difference between IM and WM can certainly not be cleared. The big question is: how can a difference between IM and WM ocur? Usually it cant, except there is bad customizing. or the assignment from storage location to warehouse was not in place while movements were done. This will then cause that WM will not get updates for MM movements.
There are not Physical Inventory in MI22 nor MI03 -> (This is the origin of the error?)
MI22 and MI03 are inventory transactions of inventory management module. For warehouse managment you have to use the WM transaction: e.g. LI03N and LX22

Similar Messages

  • While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102"

    Hi Experts,
    While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102".
    Scenerio : Have received 4 peices of this material with Goods receipt using 105 document and want to return 2 pcs back to Vendor using 122 movement type and getting this error.
    Please let me know the problem as when checked with OMCQ it is showing Warning but inspite i am getting error.
    thanks

    Hi Abhishek,
    Please find enclosed the screen print for 122 mvt type and Document used is of 105 mvt type.
    Material Document 5000000097 is used for return delivery.
    Thanks

  • Error while executing Tranx CRM_IC

    Hi All,
    I am getting following error while executing  CRM_IC
    The runtime repository could not be interpreted
    An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
    Text: The HTTP Response Had the Status 401.
    Additional Info: Unauthorized
    Program: CL_BSP_WD_STREAM_LOADER=======CP
    Include: CL_BSP_WD_STREAM_LOADER=======CM002
    Source Text Row: 131
    Has anybody encountered this problem before.
    Thanks and regards
    Atul Anand

    Hi Atul,
    the following SAP Notes might be helpful:
    [1260445|https://service.sap.com/sap/support/notes/1260445] Response display for errors in internal HTTP communication
    [1144511|https://service.sap.com/sap/support/notes/1144511] Blank screen when starting CRM WebClient or IC WebClient
    [1118327|https://service.sap.com/sap/support/notes/1118327] Exception CX_BSP_WD_HTTP_RESPONSE_ERROR when starting the IC
    Best regards,
      Andreas

  • Error M7021 -Urgent-

    Hello SAP Experts,
    We are on 4.7C.  Here is our situation.  We had an delivery that was posted in 1/2008, and we posted a Returns for that delivery in 1/2008.  We use materials with serial numbers and batches associated with them. 
    Our issue is when we create a new sales order and delivery using those same material with same serial numbers...right when we "post goods issue", we receive the error: "Deficit of BA Unrestricted prev 60 EA : EG372-00000 E100 ENGN KMA200711".  We want to post the goods issue for 12/31/2007, instead of in 1/*/2008. 
    We checked the stocks in MMBE, and everything is there. 
    Any suggestions will be appreciated and points.  Thank you for your time!
    Best Regards,
    WC

    The actual problem of this issue could be that stock quantity in MMBE is inconsistent with stock of serial numbers.
    Report RIMMSF00 is used to show where inconsistency exists between stock in MMBE and stock of serial number, but it is just an analysis tool. You may refer to note 519563 (Question no. 2) which provides a solution. Please double check and make sure if it is suitable for this case.

  • MIGO M7021 Deficit of PU IR quantity 1,000 PU

    Hi gurus,
    i found the error M7021 Deficit of PU IR quantity 1,000 PU when i was trying to cancel a good receipt with movement type 102.
    the situation is this:
    1. i issued the PO
    2. i made the GR for all the quantity of the order
    3. i made the invoice verification on the GR for not the all value of the PO
    4. i cancel the invoice verification
    5. i cannot cancel the GR because of the error M7021 Deficit of PU IR quantity 1,000 PU
    also, i can say you that the material is a "no-stock material" so the stock for the plant is 0.
    Can anybody helps me?
    regards
    Andrea

    There is:
    1 PU ordered
    1 PU in GR (Goods Receipt)
    1 PU in IR-L (Invoice Receipt)
    1- PU in SD-L (Subs. deb. log. IV)
    Now i would like to enter a 1- PU for Good Receipt, so i would like to have a 102 movement with the cancellation of the GR material document, but the system shows me this error message:
    Deficit of PU IR quantity 1,000 PU
    Message no. M7021
    Diagnosis
    Shortfall below the specified stock level or quantity amounting to 1,000 PU.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
    Procedure
    In the case of a warning message, check the quantity entered.
    In the case of an error message, change the quantity or terminate processing.
    Note:
    The abbreviations in the short text of this message can have the following values:
    BA = batch
    OR = order
    PL = plant
    PR = previous period
    PU = purchasing document
    RE = reservation
    SL = storage location
    VC = consignment stock from vendor in storage location

  • PGI for Consingment order

    Hello,
       The user is trying to create a Goods Issue wrt a Consingment order, and the system generates an error M7021 : Deficit of customerSt unr. prev  198,800 lb: .This is batch managed . I did check MMBE and there is unrestricted stock for the required quantity posted under the customer stock / batch.
    Has anyone faced this issue ?
    Thanks,
    Jagruti

    Dear Jagruti,
    Consignment process works such:
    1. consignment fill up SO
    - movement type 631
    2. consignment issue SO
    - movement type 633
    During SO creation I believe system pop up message saying that stock not enough to create SO but this is just an warning message whereby you may ignore it & able to create SO. Material movement only effective upon PGI in outbound delivery. U will get error message as you said if material is not sufficient enough against batch as stated in PGI. Pls ensure stock in batch is sufficient enough to cater for PGI. Hope this could help youo. TQ
    rgds,
    nanthakumar

  • Cancel 101 movement with Inspection lot of closed financial period

    Hi experts,
    we are having the following problem.
    We have a 101 movement with creation of Inspection lot, which was done in a finance period which is already closed.
    Now I have to cancel this movement, but I get the error M7021 with VOR, which means that I am not allowed to cancel it, because of the period is already closed.
    But we also can not open the period.
    Which possibilities do I have?
    Maybe MI10 movement?
    Kind regards

    Hello Jürgen,
    thank you for your help.
    I am confused now.
    Becasue normally I am logged on in german and now I did check the english one.
    Deficit of BA St. in QI prev. 127 M2 : "material number" 0001 "sloc" "batch"
    But here I get QI prev, but in the F1 help there is no QI or prev.
    In german I get VOR and there in the F1 help it is written, that VOR is previous period (so I think equal to PR in english).
    Now I am a bit confused.
    But anyway, the thing is that we have to empty the stock.
    Kind regards for every help, I think there is no possibility to cancel that booking as the period is closed.
    @ Biju K, to be honest your way would really be the only correct way, but at the current situation it is a bit special.
    I will do a MI10 booking.

  • Cancellation of ERS invoice and GR

    Hi gurus,
    I am trying to cancel good receipt via MBST, but getting error M7021 (Deficit of PU IR quantity). This is caused because there is an invoice booked via MRRL for this PO/GR. When trying to cancel this invoice via MR8M there is message issued (M8414), saying that this is ERS invoice and cancelation can not be processed. Proposal is to cancel good reciept first, but as stated above, this is not possible because of error.
    We are going around a circle, can you please advise how to solve this problem.
    Thanks!

    Hi,
    As a procedure,
    First step,Cancelling the ERS invoice.
    Second step,Cancelling the Goods receipt.
    Without cancelling the ERS invoice,system wont let you to cancel the Goods receipt.
    Since your are getting error message on First step,Change the Message attribute From
    Error to Warning message (M8414) -->Logistics Invoice Verification -->Define Attributes of system messages.
    Then system will let you to cancel the ERS invoice and cancell the Goods receipt.

  • Error in LI21

    Hi All,
      When the user run the LI21 - Clear Inventory Differences in MM-IM  .
    system displays the error message for two quants X&Y as :"pipeline/consignmnet movement posted without value"
    Both the quants in storage type 999 for the 711 and 712 movemen types and consignment stock.
    please advise how to avoid the error
    Regards,
    Amara

    Hello
    In the standard system, a physical inventory can be carried out for the following stock types:
    Unrestricted-use stock in the warehouse
    Quality inspection stock
    Blocked stock
    In LI21, while clearing difference in IM, it creates accounting document. if you are using consignment material then valuation is not with your plant but it is with vendor, so in this case it is not allowing you to create accounting document while clearing difference and giving error.
    Regards
    Amol

  • LI21 error

    While clearing differences in LI21 for material we are getting error "Item xyz  in sales document xyz  does not exist."
    Which process I need to follow to clear this inventory difference.
    Thanks,
    Kiran

    I cant work with fragments, for a good answer it is essential to know the full picture.
    Usually an action starts in MM with a movement, this creates then quants at the interim storage type along with transfer requirements.
    If you have no material document number then you probably started in WM.
    However, the question is why do you think you can move stock in WM if there is not at all any stock in MM?
    Is this a real inconsistency between WM and MM or is it just caused by a lack of knowledge and operating with virtual stock in WM  which should have been cleared already with TO confirmations.
    there are a lot fragments here: Why is there stock to be cleared with LI21 in 999 storage type? was there a physical count? in which storage type and storage bin was this count?
    Have there been TOs which got just  cancelled, TRs which got deleted? Are there any movements in MB51?
    You can just use LT01 with movement 999 to move the positive quant onto the negative quant and they will go away. But you will never know the reason why this happened and miss a big chance to increase your analysis skills.

  • Error in MIGO while GR reversal - Message no. M7021

    Hello MM Sapperu2019s,
    I got an error in MIGO as meniotned below,
    Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
    Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
    Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
    PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
    I have also referred the below link in SDN related to this query,
    GRN reverse problem
    Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
    Cheers,
    Kumar.S

    KUMAR.S. wrote:
    Hello MM Sapperu2019s,
    > I got an error in MIGO as meniotned below,
    > Deficit of Project stock unr. 2,00 PC : XXXXXXX 9093 1111 Q
    > Up on checking from my side the issue I observed that while executing GR reversal for the PO in transaction MIGO user is getting the error as Deficit of Project stock unr. 21,00 PC : XXXXXXX 9093 1111 Q because there is no project stock available for the relevant material.This I have checked in MMBE transaction for the respective material, Project stock is missing.
    > Now I need to know if I want to maintain the project stock for the respective WBS element in MMBE and proceed with reversal of GR in MIGO.Please let me know what action I need to take it to resolve this.
    > PS: PO qty is 26 and IR made first for qty 1 and then GR made for qty 26.
    > I have also referred the below link in SDN related to this query,
    > GRN reverse problem
    > Where it talks about the material issued document reversal which is relevant to me part from that other actions also required I feel.
    > Cheers,
    > Kumar.S
    Hi,
    first u have to reverse the transfer posting (if it is applicable) are directly u can reverse the GI after that u can cancel gr.
    u can check  the stock in mmbe for every transaction's.
    may be it is helpful for u.
    Regrds
    Raj.

  • Issue in wm during posting differences in li21

    Hi
    i have an issue in ecc6 R/3 sap LE-WM, when i am doing confirmation in LT12 and haveing some differences that are posted to the 999 storage type. When i am clearing differences in LI21 i am getting error NO MATERIAL DOCUMENT WAS CREATED, ERRORS OCCURED DURING POSTING, THERE IS NO ITEM CATEGORY ASSIGNED TO ACCOUNT 233000/INT. hOW TO SOLVE THIS PROBLEM
    Narendra kumar

    Hello Narendra,
    When you clear the inventory difference with LI21 at that time system is trying to create material document and to post the difference in this g/l account "233000" for CoA INT and it finds problem.
    Please copy the detailed message or contact FI expert.
    Regards
    Arif Mansuri

  • Hit "Maintain the exchange rate type for version 0 in 2011" error

    Hi,
    I hit error as mentioned in subject above while creating a sales order. I went to tranx <okeq> try to maintain new entry for year 2011. The problem I'm facing is I don't know what is my controlling area. Please advise how to find out my controlling area based on my plant or MM. Thanks!
    Regards,
    Jane

    Jane,
    You can find the company code assigned to the plant in OX18
    Controlling area is usually the same as company code.  You can check this, and find the exact controlling area, in OX19.
    This question should probably be posted in a CO forum rather than an APO forum.
    Best Regards,
    DB49

  • Error calling BLS Transaction as Web service

    Hi,
    I am trying to call BLS tranx as Webservice from another BLS Tranx.
    I craeted the simple BLS with no input parameter and set only one output parameter.
    Then i created the WSDL as
    http://<server:port>/XMII/WSDLGen/<Transaction path>.
    In new BLS tranx, i created the Web Service action block and gave this WSDL URL (http://<server:port>/XMII/WSDLGen/<Transaction path>).
    I gave username and password and selected the port(XacuteWSSoap) and then operation( xacute).
    In Links, I gave the Loginname and Password.
    But while executing, it showed the error as
    Error Invoking Web Service Action: Status (401): Unauthorized
    My username and Loginname and passwords are correct only.
    What is the problem and how to solve it.
    Regards,
    Senthil

    Hi,
    Which SAP MII version you are using?
    I have tested one piece in MII 12.0.9 it works for me following are steps which i followed.
    After WSDL generation
    1. in Web service action block --> cofigure i am passing following parameters
    WSDL base URL:  http://<server:port>/XMII/WSDLGen/<transaction Path>
    User Name: XXX
    Password: XXX
    2. in Web service action block --> Links I am passing following parameters
    WSDLUrl : http://<server:port>/XMII/WSDLGen/<transaction Path>
    Web_Service_0.XacuteRequest{/ns1:XacuteRequest/ns1:LoginName} : XXX
    Web_Service_0.XacuteRequest{/ns1:XacuteRequest/ns1:LoginPassword} : XXX
    Refer below SDN thread may be helpfull:
    [Web Service Action Block;
    Hope it helps!!
    Regards,
    Manoj Bilthare

  • Transaction LI21 clear differences in IM.

    Transaction code: LI21.
    I select the Bin that has to be cleared. When I click on the pushbutton CLEAR,
    I get the following error:
    A reason has to be entered for movement type 711
    Message no. M7325
    Diagnosis
    In Customizing for this movement type, you have defined that a reason has to be entered. But this has not been carried out.
    Procedure
    Contact your system administrator.
    In table T156 the field KZGRU is set to '+' for this movement type (the field must be entered). You have to check whether reasons have been entered for this movement type in tables T157D and T157E. You should either enter a reason or switch off the mandatory entry for this movement type.
    If I check the tables I have the following result:
    T156 correct; for movement type 711 and 712 there is a +.
    T157D correct; there are 4 different reasons defined for the movement.
    T157E correct; there are 4 different reasons defined for the movement.
    What do I need to do to get a pop-up window to fill in the reason while using LI21?
    I think this is Related to the MM movement type!!!!!
    Your help is much appreciated.
    Frank

    Juergen,
    Thank you so much.
    For the moment I will close this thread.
    Regards,
    Frank

Maybe you are looking for