Error: M7279 Data for creating delivery is incomplete (vendor)

Hi All,
I cannot post goods issue in MB1A transaction (movement type 281) due to this error.
I have read some of the threads with the same issue on this forum and have see the solution is to maintain customer number in VMR.
Would you know where can I see if customer number is not assigned in VMR? What is the transaction or table to update?
Thanks!
Otepogi
Edited by: Jürgen L. on Dec 26, 2011 5:51 PM
Moderator message: message locked because it is a basic question.

MK03, FK03 and XK03 are the display transactions to look into a vendor master (does't your SAP system have a menu to find those transactions yourself?)
with MK02, FK02 and XK02 a user who has authority can change the vendor master and enter a customer master, which was created before with FD01, VD01 or XD01 transaction..
the customer number field in in the control view.

Similar Messages

  • M7279- Data for creating a delivery is incomplete (Vendor)

    Dear All,
    i am getting below error while processing Goods receipt.
    "M7279- Data for creating a delivery is incomplete (Vendor)" 
    1.I am doing Goods receipt with mvt type 521( GR without ref to prod order).
    2.storge location is WH manged + HU managed.
    3.Material master is assinged with sales org / distribution channel- sales view.
    4.maintained for Transportation Group . loading group - sales gen/plant data.
    5. Maintaine for shipping data for Storage location ( customisation -SPRO-LE-Shipping-Basic shipping function- Shipping points and goods receiving points determination-Assign goods receiving points for Inbound Deliveries.)
    6. HUM- setting - LG-HUM-HU requirement for storage location and default values for deliveries)
    Why system is thowing this error message as in my case vendor does not comes in to picture ( I can cosider if a GR is with refence to PO , in that case in customer master number has to be maintained in vendor master + shipping condition entered in customer master)
    Could you pl help me on above ( as this is 521 movement , it should not have any link with vendor or customer master) then why i am getting this error.
    Appreciate your earliest response.
    Om

    I am doing simple goods receipt without reference to any document ( mvt 521 - goods receipt without ref to production order) , in that case it should not ask for any vendor or should not search for vendor code , i am not getting why it is searching for vendor.
    If i removed the setting related to HU management for storage location then it allows me to post the document without any error, but if i activate for HU managment in below path i am getting error ( even in below path if i entered any vendor code then it allows me to post the document)
    Logistics general- Handling unit management- basics-materials management - inventory management -HU requirement for storage location and default values for deliveries
    plant     Storage location      Partner storage location   Sal org  Dist chan shipping division vendor customer HU requred
    05         ZBD1                       ZPK1
    in above if i entered any vendor code then it allows me to post the doc but i remove it then i am getting above error.
    If there any alternative or other setting to overcome this error.
    Thanks
    Om

  • In  tcode   ME2o SC Stock monitoring for vendor  for creating delivery

    hi
    This scenario in AFS for creating , for creating delivery in  tcode   ME2o SC Stock monitoring for vendor,  for creating delivery iam getting error like this
    Essential transfer parameters are missing in record:  000001., Depending on the category of the delivery being created, the system needs the following transfer data:
    Outbound delivery,Shipping point,Sales organization,Distribution channel,Division,Material number,
    Delivery quantity,Ship-to party, Base unit of measure,  This scenario in AFS for creating
    Thanks
    param

    When you click the button for create delivery, a small pop-up appears.
    Which field is empty on this pop-up?
    Shipping-point?
    Shipping point is determined based on loading group of material master, shipping condition from customer master.
    So you can have various options for an error:
    Missing entry in shipping point determination for the combination of loading group, shipping condition and plant.
    Missing link vendor master to customer master (vendor master control data view)
    Wrong entry for loading group in material master,
    wrong entry for shipping condition in customer master.

  • How to find closing date for a delivery document

    I nedd to fin closing date for a delivery document. I tried with clsdate but didnt work
    If someone can help me with this

    Hi.............
                 Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
    Regards,

  • I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

    Hi all,
    I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
    I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
    Thanks in advance!

    Most of the documents have sensitive info on them.  I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
    Thanks for you help.

  • Mismatched data for "Created By" in generated Purchase Requisitions

    Hi,
    Just wanted to ask question to all gurus that, I see some mismatched data for ‘created by’ for system generated Purchase requisitions. As if I do MRP run using MD40(MPS scheduling run) then system is showing PR created by 'MRP controller' but if I run MRP using MD41(single item multi level), then system is showing the user ids name(the person on whose id MRP run is executed) is showing in the PR.
    As both the MRP runs being executed in the same user id, then there should not be such kind of diffrent data. Due to this mismathced data we are gettting some difficulties in the reporting. 
    Thanks in advance.
    Regards
    Amit

    Hi!
    It's solved. The mistake was on the connection of the tables:
    BUT000 - BUT020 - ADRC
    Thanks and regards,
    Mon

  • Burn failed: there was an error producing data for the burn

    Getting the following message after trying to bounce a project to CD:
    Burn Fail: There was an error producing data for the burn.
    Using Logic Pro 9. Burn has worked with all projects up til now. Not sure what is different about this one. Still works with old projects. ANy ideas? Thanks.

    Thanks very much for responding John, Minimum was to the CD. I have an Internal Superdrive. it does dvd and cd-rs. At this time, since my original post, I have burned four smallish rolls like 200 photos at 200+ MB's with success. And then I can try less say 100 photos @ 110MB and I get the error, and coaster that is unreadable. I have a partition area on another internal hard drive that I may try to transfer to so I can get these off my computer and maybe reinstall iPhoto. I will try to pop them into a folder and copy with Toast , which i use at times for other projects. I just like the idea of keeping all the rolls in order and not losing any of the data that is part of the originals. Any other ideas would be appreciated. The photos are sort of important.

  • Why do I keep getting an error "insufficient data for an image" when opening a document

    why do I keep getting an error "insufficient data for an image" when opening a document in Adobe Reader XI 11.0.06

    I am also having this problem, especially with scanned documents. Since I need to download scanned documents in my work this is a big problem!Sometimes I can read but not save the document, sometimes one or two of the pages will be blank from the start. I have the latest version of Adobe Reader XI (11.0.10). I tried reducing the page zoom, a suggested workaround on this page: Acrobat: “Insufficient data for an image” error after updating to 10.1.4 or 9.5.2,  but that did not help at all. FWIW I use a Windows 8.1 PC with 4 GB RAM. I usually download PDFs from the internet using Firefox.

  • Which trasaction we use for creating delivery againest STO?

    Hi
    I need to know which trasaction we use for creating delivery againest STO with 641 movement type?
    Please provide the complete steps of this process.

    Hi,
        Try it in VL10B for creating p.o delivery in background....
    From sas....

  • BAPI or FM for create  delivery in header data & item data

    Hi All,
             In my requriment  i am downloading delivery data  i.e header data and item data . When  i am uploadinng the Modification data  through BAPI  or FM.
    Thank you,
    Dinesh Reddy

    Hi,
    If you are looking for BAPI to create delivery check the following BAPIs
    BAPI_OUTB_DELIVERY_CREATE_SLS
    BAPI_OUTB_DELIVERY_CREATE_STO
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    Regards
    Prasenjit

  • Error when trying to create Delivery

    Hi SAP Gurus
    When trying to create delivery from Sales order(Va02>Sales document>Delivery),it is taking to Delivery(Vl01n).But there at the initial screen itself it is displaying the error message"Order doesnot exist"
    Kindly let me know where could be the issue.
    Regards
    Sushmitha

    Hi Laxmipathy
    Tx for your reply.
    I have checked the doc flow and could see no blocks.
    No reason for rejections.
    Also seen VOV7 and checked for the item cat details.I could see "H-delivery Related Billing-No Zero Quantities" maintained for Billing Relevance field.
    Tx in advance.
    Regards
    Sushmitha

  • Error using BAPI_PO_CREATE1 for creating PO with services

    Hi,
    I'm getting an error saying 'EnTER account assignment data for item' when I use BAPI_PO_CREATE1 and try to create POs with Service Items. I have filled all the required details, even then the system throws up this error message. Thanks for any help.
    Regards,
    Vijay

    what have you passed to the table POACCOUNT? and POACCOUNTX?
    Regards,
    Ravi

  • Idoc INVOIC error Baseline date for payment does not exist

    Dear All,
    I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
    The payment term is correctly maintained in the purchase order.
    Idoc message type INVOIC MM.
    Baseline date for payment does not exist
    Message no. M8356
    Diagnosis
    You have tried to post a document without a baseline date for payment.
    The system will not allow you to do this.
    Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
    If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
    Regards
    Arnaud

    Hello,
    Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
    In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
    I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
    Thanks anyway for your input.
    Keep in touch.
    Regards
    Arnaud

  • User exit for create delivery order

    hi! expert.
    i have a scenario when user B create delivery order (VL01N)  then get DO No.  I want to send this DO No. to user A 's mail.
    when i look for user exit with this  [program|http://wiki.sdn.sap.com/wiki/display/ABAP/FindEXITandBADIfroagivenTransactionCode]  . i don't know which one I should use.  please suggest me.
    V02V0001
    V02V0002
    V02V0003
    V02V0004
    V50PSTAT
    V50Q0001
    V50R0001
    V50R0002
    V50R0004
    V50S0001
    V53C0001
    V53C0002
    V53W0001
    VMDE0001
    VMDE0002
    VMDE0003
    VMDE0004
    my SAP  version is 4.6
    best regards,
    Kiitisak

    Hi,
    Any userexit asks the access key for first time.(Not the case with customer exits). So no probelm. Get the access key from your BASIS team and implement the exit. I wonder that MV50AFZ1 is not implemented yet in your system. Is your SAP system new?
    This is the most busy exit (Locked by some one at any time) in most of the systems:)
    Thanks,
    Vinod.

  • Error Individual check for creating the object WBS Element required

    Hi Expert,
    I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
    CALL FUNCTION 'BAPI_PS_INITIALIZATION'
    CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
    EXPORTING
    i_project_definition = g_pdwbs
    TABLES
    it_wbs_element = it_wbs_element
    et_return = it_return
    EXTENSIONIN =
    EXTENSIONOUT =
    CALL FUNCTION 'BAPI_PS_PRECOMMIT'
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    When I do so I am getting the below errors. Please suggest.
    "Individual check for creating the object WBS Element C-497082 required ".
    "Individual check for creating the object WBS Element C-497082-0001 required".
    Please suggest how to correct this error.

    Hi Karthikeya,
    I think the project profile which you are using has a different mask and the WBS element you are passing is different to the BAPI.
    Are you able to create manually from CJ01 using the same WBS element?
    Create a project manually and it will give the list of the mandatory fields set in the config. Using that list populate the BAPI struture accordingly.
    Hope this helps.
    Thanks
    Lakshman.

Maybe you are looking for

  • Request.getCookies() returns null, not 0 length array

    (reposted from J2EE forum) Just upgraded to 9ias with Embedded OC4J and we were getting a NullPointerException. Our previous calls to request.getCookies() AKA http://java.sun.com/products/servlet/2.1/api/javax.servlet.http.HttpServletRequest.html#get

  • Page Background Lost on Regions above Content Area for Some Pages

    Hi - I am a iWeb novice, but not a total rookie on this kind of software... I have a simple iWeb project that applies a gradient fill to the page background, and applies one of the gradient colors to the Browser background on every web page. I am usi

  • How do I get rid of "do you want to allow the following program to make changes to this computer"?

    I recently installed Adobe Acrobat 8 Professional and every time I open a PDF file that is stored on my computer, I get a pop-up that asks "Do you want to allow the following program to make changes to this computer?".  How do I get rid of this?  I d

  • Load Process needs to break into two Processes

    Hi friends I have a Process Of Load data in my Process chain. This Load Data is loading into two targets(PSA and then into Data Target, Package by Package). The two targets are: 0MATERIAL$T, Material (Texts) ZE_MATERL$T, Euro Material (Texts) Now i h

  • Crystal Reports XI Subqueries

    Post Author: userxi CA Forum: Data Connectivity and SQL To my knowledge there is no way to write a crystal report even with version XI Release 2 with a subquery in the main query.  This be in either the from or where clause.  Is this correct?  I have