Error Mac os x version 10.9.3 snapshot yellow
I have a problem with the image all this happened after the last upgrade done Error with new update on mac snapshot yellow strip to start my computer characteristics are siguentes.
Processor Intel Core i7 quad core 2.6 GHz (Turbo Boost up to 3.6 GHz) with 6 MB shared L3 cache.
Flash Memory Storage 512GB.
Intel HD Graphics 4000 + NVIDIA GeForce GT 650M with 1 GB GDDR5 memory and automatic graphics switching.
8 GB integrated memory DDR3L 1600MHz
I will leave a video with my problem please help
https://www.youtube.com/watch?v=qxbSEPDj2Lo
Hello there, ZeniTM.
The following Knowledge Base article provides some great recommendations for troubleshooting display issues on your Mac:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Once you're reviewed the recommendations in regards to updates, this portion of the section on "No video or no signal, image distortion, "snow," or flickering" is useful:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
Error message: have mail version 4.3 (1081/1084). Can't be used with mac/ox version 10.6.8. Help?
My son deleted the mail application. Tried to to re-install it from download version. Get error message: You have mail version 4.3 (1081/1084). Cannot be used with Mac O/S version 10.6.8. build 10K549. Any suggestions?
Hi ...
The Mail app is not available for downloading.
You need to reinstall the Mail app from your install discs. -
I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?
Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena -
Lately, whenever I try to do a software update on my Mac OS X version 10.6.8 Macbook, I get an ERROR message. What to do?
dancingcowboy wrote:
Lately, whenever I try to do a software update on my Mac OS X version 10.6.8 Macbook, I get an ERROR message...
And the message is... -
I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?
Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps -
Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS
iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)
-
I deleted my microsoft office:mac 2011 word from my toolbar. I have Mac OS X version 10.6.8. I tried to reinstall but it won't work. This has never happened before. I get an error message each time. Please help!!!!!!!!!!!!!! I don't have time machine.
By Toolbar, do you mean the Dock? The Translucent bar normally at the bottom of the screen, but sometimes at the right or left side?
If that's what you mean, the Dock is merely a shortcut to what is already inside the Applications folder's Microsoft Office 2011 folder. If you have Word inside your Microsoft Office 2011 folder, you can drag it back to the Dock.
If you deleted the Microsoft Office folder, or it is empty, you'll have to reinstall it.
If you don't have your registration code, you'll have to call Microsoft for a new one. -
am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.
The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
When I tried installing this software, I get this error: "The installer encountered an error that caused the installation to fail. contact the software manufacturer for assistance." Any idea why? My computer is Mac OS X Version 10.7.5
What software are you trying to install?
-
TS3212 error message help: This software requires Mac OS X version 10.6.8 or later.
Hi I'm trying to download the most up to date version of itunes and keep getting this message: This software requires Mac OS X version 10.6.8 or later. I have a mac book pro? can I not download this??
Cheers
LisaHi Niel thanks for that I tried that I'm runnung Mac OS X 10.6.5 it's not having it from the software update in preferences either I think I'm going to need a DVD!!
Thanks for your help
Lisa -
How do I install camera raw updates to the mac app store version of elements 10
In the mac app store version of Elements 10 there is 'get updates' link on the help menu. And when I try to do it manually from a download I get a message telling me that 'this update no applicable'.
Once again, Apple only provides support for purchasing issues,not with using software purchased via the app store, any more than staples will give you tech support for a boxed version you buy from them:
The Mac App Store handles the download, installation, licensing, and updating of all products purchased through it. If you encounter an issue with an Adobe product during one of these four processes, visit http://www.apple.com/support.
For all other issues, including program errors and how to questions, visithttp://www.adobe.com/support.
Apple only provides support for problems with updates released via the app store and adobe has NEVER bothered to issue updates anything offered through the app store, so you can't get any help from apple for this.
It's more complicated to install ACR in the app store version. You have to do it manually. See this thread:
http://forums.adobe.com/message/4106477 -
Computer has Windows 7 Ultimate 64bit. Firefox has run fine for over a year on this computer. Nothing was changed or updated except Windows update shows that it installed updates on Aug 19. I had computer off for week before because out of town, came back and started on Aug 18, but Firefox worked on that day. Did not use FF again till today. Today on Aug 22nd, firefox will not start, shortcut icon has changed to program not there. Exe in folder when clicked brings up error message say the version of this file is not compatible with version of Windows I am running. Firefox exe shows created Aug 20. I suspect update, either Windows or FF but lean towards windows, happened that broke things. I notice IE 10 updates, .NET framework updates and malicious software removal tool updates were installed. I have tried restarting computer, did not fix. Tried to run as admin, didn't work. I do not want to uninstall FF unless have to because of all the stuff I have in there, bookmarks, last pass passwords, etc.
Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files ('''not the profile folder where the bookmarks are stored''') and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
GPU: currently disabled due to an error (unsuported hardware/driver version)
I still have problems after the last update (ACR 9).
There is a note - GPU: currently disabled due to an error (unsupported hardware/driver version).
I use AMD FirePro V4800 that is in the list of Adobe - Photoshop CC and CC 2014 GPU FAQ , as followed
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
I installed the latest driver from AMD site - Workstation
So, my system has the latest driver now
The release notes of the driver say that now my video-card supports
DirectX ® - 11
OpenGL - 4.3
OpenCL™ - 1.2
What could be wrong? And what should I do?
PS Photoshop also works strange: some of plug-ins (for example, by Nik Software) show a white window in the place where the picture should be.
Should I buy Nvidia Quadro K4200? But is was not in my plans at the moment when I did the last upgrade of Camera Raw.Hello,
First, please consult the Camera Raw GPU FAQ for specific troubleshooting tips.
https://helpx.adobe.com/photoshop/kb/acr-gpu-faq.html#Suggested%20System%20Requirements%20 &%20Graphics%20Cards
You may need to completely uninstall/reinstall the drivers for your AMD card. Please consult the manufacturer's support site for the uninstall/reinstall procedures.
Hope that helps,
- Chris -
Mac mail version 4.5(1084/1085) can't be used on Mac OS X Version 10.6.8(Build 10K549)
At some stage today I did an update which has killed Mac Mail.
I have read the forums, performed a combo update 10.6.8 with no result, I still get the error
You have Mail version 4.5(1084/1085). It can't be used on OS X Version 10.6.8 ( Build 10K5489)
Any thoughts?Thanks mate but Software update is indicating that I am all up to date.
I have booted off an older clone and mail was fine. I may have to go for a fresh install of the system but it annoys me to have to do that. It's gotta be something simple! -
Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.
I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
Windows and all their applications. It didn't solve the problem!
What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
My next step is to send the customer a new ADSL modem/router to try.
I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.
Maybe you are looking for
-
I installed an application called "You SendIt" because some audio files were sent to me and I had to access them through it. My Mac is running Windows and OS-X. I bought an version of Office 2008 separately. I tried to uninstall it, to get rid of all
-
Owning 2 iphones with one Apple account has = Sync Problems.
Owning 2 iphones with one Apple account has = Sync Problems. iTunes is thinking my old iphone 4 is the same phone as my iphone 5C. When I plugged in my iphone 5C it auto synced my 5C to iTunes and it wiped my 5C and restored it to the same content
-
Why is the wrong date displayed in the month view?
Hi there, I just noticed something in the calandar for iOS7. If you are in the month view, the highlited date is the the priviuse day (fx will highlight the 18 Sep when we have the 19 Sep). but if you go in to the week view, the correct date is highl
-
I have heard the otterbox defender case is great, but many have told me that it is hard to remove for charging. Any suggestions?
-
How to send data from WEBI HYPERLINK to SAP R/3
Can someone please help in sending the data from WEBI to R/3 system. We created a universe on top of a BEX Query and on Top of that we created a web intelligence report. Now our requirement is when we click on any record in BO web ntelligence report