Error "maintain plant 3000 for sales area

hi,
We had two companies, 3000 and 9000. Sales order is created in company
9000, and delivery plant is 3000. however, the error message is
displayed " maintain plant 3000 for sales area". pls advice.

Hi Jojo,
Sales processing is carried out with respect to the sales area.
For a sales transaction, if u r using plant....then, plant has to be assigned to the sales organisation and distribution channel.
To assign the plant to the above stated org.units, U need to have plant in the list. Since the plant  have created in other company code, U can never assign plant to the sales area of other company code.
U create a new plant in relevant company code...asign plant to company code, sales org. and dist. channel
Regards,
Praveen.

Similar Messages

  • Ship-to party 10106086 not defined for sales area 6000 40 30 error

    HI gurus,
    We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
    please help me in this we are unable to create a order.
    this is urgent.

    Hi,
    The error is Ship-to party 10106086 not defined for sales area 6000 40 30
    Here system is considering distribution chan 40 & division 30 
    Go to VOR1 and maintain like as
    Sales ogz - Distribution channel - Distribution for Condition  - Distribution chn for CUST/MATERIAL
    6000 - 40 - 40 - 00
    Then in VOR2
    Sales ogz - Division - division for Condition  - division for CUST
    6000 - 30 - 30 - 00
    Then also check you have created customer for sales area 6000-00-00
    Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
    OR
    Remove division form material master basic data tab 1
    Kapil

  • Error message: Ship-to party 1111 not defined for sales area 1000 01 50

    Hi friends,
    I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
    When created SO, I got a error message saying "  Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
    Please advise where I missed configuration.
    Thanks,
    Linda
    Edited by: LindaSAP on May 25, 2010 5:40 PM

    Hi,
    Please check the below links
    Ship-to party not defined for sales area
    "SHIP TO PARTY NOT DEFINED FOR SALES AREA "
    Ship to party is not defined for sales area..
    Ship-to party not defined for sales area
    Ship-to party 147 not defined for sales area US DS 20
    ship to party -sales area error
    Regards
    Senya

  • Error:Ship to party not defind for sales area

    Dear Friends,
    I created a material for sales area 1000/10/00.
    The division that i assignes was 05 in MMD.
    Now when i create a order the system gives a messege "ship to party 1033 not defind for sales area 1000/10/05, but at the order initial screen i had given sales area 1000/10/00.
    Where is the problem?
    regards
    debasish

    Extend or create the customer to the sales area 1000/10/05 or change the division in the material as" 01" then ur problem will solves.
    Regards,
    kishore.
    Edited by: kishore gopala on May 13, 2008 1:12 PM
    Edited by: kishore gopala on May 13, 2008 1:26 PM

  • Ship-to party not defined for sales area

    Hi all,
    I am really confused while creating a sales order, I need your help.
    My sales org. - 1083, distribution channel - CY, Division - CW.
    When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
    After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
    Where did I mess up ?
    Thanks,
    -Chandru

    Hi,
    Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
    Just try and maintain it there against your account group and against your sales document type in VOV8.
    Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
    Let me know, reward points if helpful.
    Regards
    Ravi

  • Ship-to party 147 not defined for sales area US DS 20

    Hi,
    I am getting following error while creating a sales orcer with ref to contract
    Ship-to party 147 not defined for sales area US DS 20
    Points will be rewarded for satisfactory answer.
    Thanks & Regards,
    Vinayak

    Hi,
    After maintaining in US DS 20 it is working fine.
    But normally we never maintain in US DS 20 for other transaction.
    then why it is asking for this transaction.
    we always create in US DS 10.
    is their mistake while creating a BP or any SPRO changes required.
    Thanks & Regards,
    Vinayak

  • Ship-to party 1600 not defined for sales area 1000 10 20

    Hi Friends,
    I am making  inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
    I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
    But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
    This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
    Any pointer will be rewarded.
    regards

    in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
    same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
    also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
    same error.
    Any other inputs.
    Regards
    Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

  • Error :Maintain pricing conditions for the material for the excise invoice

    Hi
    i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
    Message no. 8I629" can some body can help me.
    with regards
    Narendra kumar

    Hi,
    goto tcode fv11 u have to maintained the condition.
    first enter the condition type like jmop -
    then enter, next screen u have the select the below comination.
    select the plant/vendor/material base u have to maintain the conditions.
    Thank's
    MVS

  • Error during material determination for sales document item - RRB

    Hi
    Iam getting following error when trying to create a billing request using DP91.
    Error during material determination for sales document item 40001560/000010
    Message no. AD01155
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
    Material origin is checked in costing tab in material master.
    Appreciate help in resolving this.
    thanks,
    Vaishnavi

    Hi Vaishnavi
    The error which you are getting is related to costing.So kindly reach your FI Consultant
    please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
    ERROR AT DP90  TRANSACTION
    Regards
    Srinath

  • Err.Sold-to party 1 not mainted for sales area EL01 01 01

    Hello SAP Gurus
    I am trying to save a quote from an external application using .NET connector which calls the bapi 'BAPI_QUOTATION_CREATEFROMDATA2'.
    I am getting back an error 
    E        VP     197       Sold-to party 1 not mainted for sales area EL01 01 01 .
    I am trying to search for this error on all SAP related areas and am not able to find anything that answers my question.
    Any feedback will be highly appreciated.
    Thanks
    Ram

    >
    Ram Prasad wrote:
    > Fortunately or unfortunately I am the only SAP guy in my company and I am actually certified in XI and but am wearing different caps at different time.
    ..Exactly You remind me my early career of SAP,I was the Only Person In My project,No matters it was kind of Support one,But i had been asked to handle some Tedious Asset Accounting isses-Some how i servived and turn the things around me,And Believe me The Stuff i learnt in such tiny 7 month is far More than i learnt my rest of my Life.
    Fortunately~

  • Ship to party not defined for sales area x/y/z

    Hi Friends,
    While creating sales order I am getting following error---
    Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
    xsales organisation  ; ydistribution channel ; z--division
    Regards

    Please go in Transaction XD01- Create Customer.
    then in Account Group, Select Sold to Party.
    Assign sales area , xsales organisation ; ydistribution channel ; z--division
    and check.
    Hope thiswill solve your problem

  • Order type 'OR' has not been defined for sales area (IDOC related)

    Hi,
    iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables,  the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
    Thanks

    Hi,
    I believe this is nothing to do with the setting the IDOC value..Some config is missing...
    Check to make sure if there is a record found in the view V_TVAKZ for the combination..
    IF not check with your function consultant regarding this..
    Thanks,
    Naren

  • Suggest EnhanceMent For SALES area determination In stock Transfer.

    Suggest EnhanceMent For SALES area determination In stock Transfer.
    V02V0001 Sales area determination for stock transport order Doesnt Work,

    Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
    Create Purchase Order (ME21N)
    Create Delivery in background (VL04, VL10a, VL10C, etc)
    Change Delivery for picking / packing & PGI (VL02n)
    Create Billing Document (VF01)
    Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Incase of Inter-company, the process will be as under:
    Create Sales Order (VA01)
    Create Delivery (VL01N, etc)
    Change Delivery (VL02N)
    Create Billing Document (VF01)
    Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
    Regards,
    Rajesh Banka

  • IE07 and error 'Maintain field selection for Fleet data in Equipment List'

    Hi all,
    When running transaction IE07 (multi-level equipment list) , I get the following error:  'Maintain field selection for Fleet data in Equipment List (Multilevel)'
    I can't see where is the missing configuration point.
    We have activated business function LOG_EAM_CI_3.
    Have anyone encountered this error before?
    Thanks,
    P.

    Hi Narasimhan
    Could you give more details ? where is located this setting?
    Thanks,
    P.

  • Sales Order Delete  for Sales Area which configurations are remove .urjent

    Dear Experts,
    I had created a sale order with sales are 1000,10 ( direct sales) and 00 , but business had told that our dist channle must be 50 Trading  not direct , alredy business had done a sales order with 10 dist channel after that they changed the requirement stating that it must be with 50 trading. we have configured accordingly and removed the previous assignmnets.
    But now i am not able to view that sales order which we have created erlier, because i want to delete that order because stock is reserved with that sales order.
    kinldy suggest me how to delete that order.
    regards
    jayanth

    Hi
    The sales order will be in the system and can be displayed eventhough If you delete the assignment of order type OR with sales area 1000,10,00 and make new assignment(Assign sales order types permitted for sales areas ).
    I had created a sales order with 1000, 10, 10 sales area, then _*i had deleted the org assignmnets*_ and in Assign sales order types permitted for sales areas.
    The problem here is you have dismantled the org structure that is you have removed the org assignments. It is clear by your above statement. Then in this case you can not view any sales order which was originally created for the old sales area(1000,10,00).
    So you have to either setup your old org(1000,10,00) assignments and try to display and reschedule the old sales order or need to explore other options of deleting the sales order requirements.
    I have simulated the above scenario and it works fine. Try the above to set up org structure again and do whatever you want to do with the old sales order and after finishing all your things, you again dismantle it.
    Hope this helps you.
    Regards
    Rajkumar K

Maybe you are looking for