Error : Maintenance dialog for ztable is incomplete or not defined
Hi Gurus
While maintaining the ztable through SM30 got the following error.
Maintenance dialog for ztable is incomplete or not defined
I have to add new enteries in the previously created ztable.
Please suggest
Manvir
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
Similar Messages
-
The maintenance dialog for V_AISUSER is incomplete or not defined
I was not able to assign S-user for SAP Support Portal functionality from SPRO. I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
The maintenance dialog for V_AISUSER is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Thank you in advance for your assistance.
Regards,
FrancHi Nesimi,
I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
What's a ditto...
Thank you again for your time.
Cheers,
Franc Nguyen -
The maintenance dialog for J_2IVLYCTR is incomplete or not defined
Dear experts,
In transaction code J2I7 following error is appering
The maintenance dialog for J_2IVLYCTR is incomplete or not defined
Regards,
ABHIJEET JOSHIHello,
This depends on the version and release level, Please check this veiw of J_2IVLYCTR . If these below given entries are not their then
MANDT MANDT CLNT 3 Client
BUKRS BUKRS CHAR 4 Company Code
REGISTER J_2IREGSTR CHAR 10 Register name
LAYOUTNR J_2ILAYNR NUMC 3 Layout number
LAYOUTNAME TDFORM CHAR 16 Form Name
LAY_DESC J_2ILAYDES CHAR 64 Layout description
PROGRAME PROGRAM CHAR 40 Program/transaction in SQL trace analysis
ROUTINE J_2IROUTIN CHAR 30 Form routine
NOOFCOPIES J_2INOCOPI NUMC 3 No. of copies
OUTDEVICE RSPOPNAME CHAR 4 Spool: Output device
if not available add these entries in above mentioned table and check J1I7 tcode.
Regards
Mahesh Naik. -
The maintenance dialog for T2538 is incomplete or not defined
hi to all
i was trying to configure tc. KES1 in CO-PA trying to maintaining characteristic values.
does anybody give idea HOW TO MAINTAINE DIALOG FOR T2538
V V URGENT
HARIHi Hari,
Please let me know the solution for the issue if you have mentioned as i am exactly facing the same kind of issue.
regards,
Mahesh -
Problem with a maintenance dialog for a table
Hi,
I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
When I use the transaction "ztransaction", I have a message like this :
"The maintenance dialog for ZTABLE is incomplete or not defined".
What can I do ? How can I complete or define the maintenance dialog ?
Thanks in advance.
Regards.
C.First after creating a table you should creat a Table maintenance generator.
Utilities -> Table Maintenance Generator .
After creating Maintenance goto
Environment -> Transaction
This will succesfully create a transaction for your table
You should give parameters while creating the transaction.
UPDATE = 'X'
VIEWNAME = your table name
Bhupal -
Hello folks,
I had successfully created a table and I tried inserting some records in to the table using table maintenance.
I received the following error.
'The maintenance dialog for table zxxx is incomplete or not defined'.
What does this mean?? And what should I do??
I am pasting the detail help over this error.
The maintenance dialog for ZTV_DBS_RANGE_NO is incomplete or not defined
Message no. SV 037
Diagnosis
The called function with the view/table ZTV_DBS_RANGE_NO needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Please helpYou have to create the maintenance dialog for table you would like to use with transaction SM30 / SM31.
To do this look the transaction SE55.
(or SE11, select the table, MODIFY, (menu) Utilities -> Maintain dialog ... )
Regards
Frédéric
Message was edited by: Frédéric Girod -
The maintenance dialog for SM 30
Hi i am maintaining a table through SM30. and i have used one display field in transaction for that table. when i am entering data through transaction that disply is getting displayed when i press ENTER. but when maintaining through SM30 thet display Maintanance dilog Incomplte,
then i went tbel maintanance and create ,but it doesnt save
please help me
This is the error i am getting'
<b>The maintenance dialog for ZFT017_GLCST_TR is incomplete or not defined</b>
kanishkaHi,
there is a prob in Table maintenace Generation Cretaion.
se11> table name> change.
Menu- utilities- table mauintenace Gen .
Give Authorisation Grp and Funct Group.
Single Step
Provide Screen No.
Then Assigning the tCODe.
Se93.
In this U shud give TABLE VIEW : TABLE NAME.
UPDATE : X <----
Ensure This u have given.
Rvert Back if any issues,
Reward with points if helpful.
regards,
Naveen -
Maintenance Dialog for T25* Tables in Tcode KES1
Hello,
I am getting an error saying there is no Maintenance Dialog for T25* tables in KES1 Transaction. Please let me know how to go ahead and solve this issue.
Thanks very much in Advance.
regards,
MaheshHi,
I am also getting the same error "Maintenance Dialog for T25* Tables in Tcode KES1"
Did anybody have any solution for this.
Regards,
Mohan -
Transfer Order : Data for storage type search is not defined (A )
Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator : E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AMHello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar -
Maintenance Dialog for V_T7INDA_OFFGRP does not exist
Hi Friends,
I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
not exist'.
When I went to se54 to create the Maintenance Dialog, I am not able to
see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
Can you please help me how I can creat the Maintenance Dialog for this
view.
Thanks,
Suresh Kumar PaturiProcedure compiles OK if I replace
SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
by
pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
Thanks -
Hi Gurus,
I am working on NWDS 7.01.00 after opening NWDS, I am getting this error. My error log file is:
java.lang.IllegalStateException: INTERNAL ERROR: Global root folder for pre-installed component archives not defined.
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getRootPathForCompartment(DevConfFileSystemLayout.java:202)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteSCRoot(DevConfFileSystemLayout.java:76)
at com.sap.tc.devconf.impl.DevConfFileSystemLayout.getAbsoluteTopLevelDCsRoot(DevConfFileSystemLayout.java:169)
at com.sap.tc.devconf.impl.LocalSCNode.initializeTopLevelDCNodeList(LocalSCNode.java:41)
at com.sap.tc.devconf.impl.LocalSCNode.<init>(LocalSCNode.java:24)
at com.sap.tc.devconf.impl._Factory.createLocalSCNode(_Factory.java:385)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.getTopLevelDCsForLocalCompartment(DevelopmentConfiguration.java:3415)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB._initializeLocalEntries(ComponentSyncDB.java:788)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initializeLocalEntries(ComponentSyncDB.java:759)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.initialize(ComponentSyncDB.java:436)
at com.sap.tc.devconf.impl.syncdb.ComponentSyncDB.retainEntriesFromCompartment(ComponentSyncDB.java:824)
at com.sap.tc.devconf.impl.LocalDCScanner.refreshSyncDBForLocalDCs(LocalDCScanner.java:103)
at com.sap.tc.devconf.impl.DevelopmentConfiguration.<init>(DevelopmentConfiguration.java:378)
at com.sap.tc.devconf.impl._Factory.createDevelopmentConfiguration(_Factory.java:354)
at com.sap.tc.devconf.Factory.createDevelopmentConfiguration(Factory.java:103)
at com.sap.tc.devconf.DevelopmentConfigurationFactory._addConfiguration(DevelopmentConfigurationFactory.java:2062)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:761)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:696)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:667)
at com.sap.ide.eclipse.component.devconf.DevConfManager.createDefaultDevConf(DevConfManager.java:341)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:442)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:109)
at com.sap.ide.eclipse.component.provider.ComponentProviderPlugin$1.run(ComponentProviderPlugin.java:82)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)Maybe some plugins are missing. Try reinstall the latest version of the nwds that matches to you server version.
http://wiki.scn.sap.com/wiki/display/Java/NWDS+Download+Links -
Error:Account determination for entry 1000 KBS 0001 not possible
Hi all,
i created one project PO account assignment category Q ,with out master data ,material text , material group , i entered W.B.S ,
P.O . created ,while doing GR , i am getting following error Account determination for entry 1000 KBS 0001 not possible
regards
vijjuDear Viju,
The error M8 147(Account determination for entry XXX KBS
not possible)is because of the corresponding entry mismatch in T030
table .For resolving this we need to make a corresponding entry in
transaction OBYC (the menu path in SPRO is as follows)
Materials Management
-> Valuation and Account Assignment
-> Account Determination
-> Account Determination Without Wizard
-> Configure Automatic Postings
Please also review
Note 364570 M8147,KBS posting when assigning accnt to GR for PO
Regards
V V -
Error message - attributes of the user inconsistent or not defined
Hi,
We are in SRM 7.0 have created new plant and some users assigned to this plant.
However when logged into portal page, it gives the error message ' Attributes of the user inconsistent or not defined' see PPOMA_BBP.
When checked in the org structure the data entered are correct.
What could be the reason for this error message.
Rgds,
MadhanHi,
Please check the following in the org structure in PPOMA_BBP for the users
1. Check whether the attribute for the ITS --URL is given.
2.Check the attribute for the company code is given.
3.Check whether the Roles for the users is given
in addition go to the check tab and check if any Red mark are there.
correct those attribute.
The error is basically related to the PPOMA_BBP only
Regards
G.Ganesh Kumar -
Data for storage type search is not defined (E FC1 ) in WM module
Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
WilliamSAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view -
Error message - Message no. 26168, Document type '' not defined .
Hi,
I am setting up QA system after successful building of Dev System .
While chnaging newly created folder in QA system gives error message - Message no. 26168, Document type '' not defined .
Document Type exists and are used to create folders successfully.
Why I am getting this error?
Kind Regards
HarishHi,
Am Not able to implement this Note .
Am facing the same issue .Please let me know the solution ASAP.
Our SAP Version ECC6 EHP6
Regards,
Veeramani
Maybe you are looking for
-
Connecting External Amp to Macbook
Hi, sorry if this is one of those "dumb" questions, but I know Macs well but not electronic equipment... I have a multi-media show that needs some BIG sound to it. In the past, I've hooked up my office speakers to my Mac, but that just doesn't cut it
-
How SAP HANA is helpful in motorracing or F1?? Need Help.
Hi everyone, I am a Graduating Student. Looking for a career in Motorsports. I got to know that SAP HANA is much helpful in motorracing. My question is how it is helpful and what is the present value and what will be the importance of HANA in Future.
-
A/c rxcprod belongs to which group
Hello, SUN SOLARIS 2.6 OC 4.0 oracle 8.1.6.2 I am attempting to install OC 4.0. I created a user account in unix called rxcprod. as per the manual it says that PSUB runs under a special privileged account called rxcprod. 1. What group does account rx
-
Script task how to add date value
hi i have following code i am trying to add date into script task Public Overrides Sub CreateNewOutputRows() Dim vars As IDTSVariables100 Dim vars1 As IDTSVariable100 Dim recordCount As Integer Dim rdate As Date
-
HT5312 I'm not sure what the answers are how do I reset them
How do I reset