Error manifest file #2083
Since yesterday I have a problem with one of my ereaders. All of a sudden it has to autorize itself and then the message "error during recovery after saving manifest file" (translated from Dutch, I don't know what the exact English phrase might look like). And only with one reader: bebook club s, my other one, a normal club, doesn't have this issue.
Nothing changed in the setup so it appeared all of a sudden. The worst thing: I can't copy new purchased books while this results in an io error. Also, when I copy the new book to an SD card, my bebook can't open it while the DRM hasn't been set (this might be writtento manifest.xml I guess)
Who can help me? I saw some similar questions but no answers
I also posted the solution in another thread, sorry for the double entry but just to be comprehensive
In the end it was quit simple and the issue was in the ereader itself. AND I found a better solution for managing my books as well. I downloaded calibre to check if this helped. And yes, in a way. I could copy the book which caused the trouble but after i opened it on my ereader (worked), closed and try to open it again, the directory structure was a mess.
So I took the drastic approach and formatted the memory of my bebook. This helped and now it is working again. And sorry for ADE, calibre is a much nicer program which sees the SD card as well, gives more functionality and is much faster.
I hope this helps others, it was hard to find a solution on the internet
Similar Messages
-
Cisco NCS Prime upgrade error : "% Manifest file not found in the bundle"
Hello ,
I am currently trying to upgrade my NCS software from 1.0.1.4 to 1.1.1.24 using the upgrade bundle .
Running the upgrade procedure i receive the following error message :
|---------------------------------------------------------------------------------------------------------------------------|
CPNCSSRV/admin# application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz ncs-ftp-repo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
|---------------------------------------------------------------------------------------------------------------------------|
Just to make it clear :
1. the .tar file isn't corrupted
2. there are no typo's
3. the repository is fine
Any ideas would be appriciated .
Thanks ,Hi,
In case anyone encountered the same problem, here is how you solve it:
1- Login into shell by typing "shell command" from NCS enable mode.
2- Copy the installation zip file to local disk directory:
cp /source-path/name/installation-file-name.zip /localdisk
3- Browse to localdisk directory which exists in the root directory and unzip the zip installation file:
[LMS/root-ade localdisk]# unzip installation-file-name.zip
4- Exit shell by typing "Exit"
5- At this step, if you type the "dir" command, the installation file "NCS-upgrade-bundle-1.1.1.24.tar.gz" should appear.
6- In "conf t" mode, create a new repository
repository myrepo
url disk:/
7- application upgrade NCS-upgrade-bundle-1.1.1.24.tar.gz myrepo
Please rate if you find helpful.
Thanks.
Moath Rawashdeh -
WLS 6.1, SP2, Error Deploying WAR, Manifest file problem
Hi,
When I moved to SP2 on 6.1, I am getting a new error while deploying a war file.
It looks from the stack trace that there is a problem with my manifest file, but
I am just taking the manifest file created by jdk1.3 jar utility - My META-INF
dir is empty before jarring. When opened in notepad, the cursor can go to the
start of the line below the blank line. I mention this in case that is the EOF,
and relevant to the problem. Any help is much appreciated.
Mike
Manifest File:
Manifest-Version: 1.0
Created-By: 1.3.1 (Sun Microsystems Inc.)
Stack Trace:
####<Feb 22, 2002 10:32:36 AM EST> <Info> <HTTP> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101031> <[WebAppServletContext(1118014,ipp,/ipp)]
extracting classfiles to C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ipp:>
####<Feb 22, 2002 10:32:36 AM EST> <Debug> <HTTP> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101158> <Exception
thrown while loading ipp: java.lang.StringIndexOutOfBoundsException: String index
out of range: -1>
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1525)
at weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
at weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:177)
at weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3405)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy32.addWebDeployment(Unknown Source)
at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy98.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.update(Unknown Source)
at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<Feb 22, 2002 10:32:36 AM EST> <Error> <J2EE> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <160001> <Error deploying
application ipp: Could not load ipp>
####<Feb 22, 2002 10:32:36 AM EST> <Error> <Management> <mdunbar> <myserver> <ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <141042> <Error deploying
application .\config\mydomain\applications\ipp.war: java.lang.reflect.UndeclaredThrowableException>I figured out what was causing this for me. Apparently, the new Manifest reader
classes in WLS SP2 are a lot pickier ( polite way of saying they dont handle exception
cases very well ;-) ). I had 2 third-party jar files in my WEB-INF/lib directory
whose manifests had issues that the Manifest reader could not handle. One of
them was a header line that wrapped and the other had extra lines at the end of
the file. I had to unjar them, fix the manifests, and re-jar them. the server
started up fine after that.
It might be nice if they provided a better error message than "String Index Out
Of Bounds: -1" for this problem, but hey, you can't have everything because where
would you put it :)
"Mike Dunbar" <[email protected]> wrote:
>
Hi,
When I moved to SP2 on 6.1, I am getting a new error while deploying
a war file.
It looks from the stack trace that there is a problem with my manifest
file, but
I am just taking the manifest file created by jdk1.3 jar utility - My
META-INF
dir is empty before jarring. When opened in notepad, the cursor can go
to the
start of the line below the blank line. I mention this in case that is
the EOF,
and relevant to the problem. Any help is much appreciated.
Mike
Manifest File:
Manifest-Version: 1.0
Created-By: 1.3.1 (Sun Microsystems Inc.)
Stack Trace:
####<Feb 22, 2002 10:32:36 AM EST> <Info> <HTTP> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101031> <[WebAppServletContext(1118014,ipp,/ipp)]
extracting classfiles to C:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ipp:>
####<Feb 22, 2002 10:32:36 AM EST> <Debug> <HTTP> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <101158> <Exception
thrown while loading ipp: java.lang.StringIndexOutOfBoundsException:
String index
out of range: -1>
java.lang.StringIndexOutOfBoundsException: String index out of range:
-1
at java.lang.String.substring(String.java:1525)
at weblogic.utils.jars.ManifestEntry.stream(ManifestEntry.java:166)
at weblogic.utils.jars.Manifest.stream(Manifest.java:78)
at weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper.java:398)
at weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.java:177)
at weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebAppServletContext.java:3405)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:3376)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContext.java:862)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:815)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:428)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:76)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy32.addWebDeployment(Unknown Source)
at weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeployment(WebServerMBean_CachingStub.java:1121)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:315)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:984)
at weblogic.management.internal.DynamicMBeanImpl.addDeployment(DynamicMBeanImpl.java:971)
at weblogic.management.internal.DynamicMBeanImpl.add(DynamicMBeanImpl.java:956)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:648)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy98.addTarget(Unknown Source)
at weblogic.management.mbeans.custom.ApplicationManager.autoDeploy(ApplicationManager.java:867)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:966)
at weblogic.management.mbeans.custom.ApplicationManager.addApplication(ApplicationManager.java:886)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:802)
at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:733)
at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy5.update(Unknown Source)
at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<Feb 22, 2002 10:32:36 AM EST> <Error> <J2EE> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <160001> <Error
deploying
application ipp: Could not load ipp>
####<Feb 22, 2002 10:32:36 AM EST> <Error> <Management> <mdunbar> <myserver>
<ExecuteThread:
'1' for queue: '__weblogic_admin_html_queue'> <system> <> <141042> <Error
deploying
application .\config\mydomain\applications\ipp.war: java.lang.reflect.UndeclaredThrowableException> -
Errors in chrome manifest file,all toolbars are shutdown
could not read chrome manifest file
'c:\ program files (x86)\mozilla firefox\extensions\ {972ce4c6-7e08-4474-a285-3208198ce6fd} \ chrome.manifest'.
also
empty string passed to getelementById( ). chrome://browser/content/browser.xul
all toolbars are shut down including: yahoo,msn,norton,security safe,shop-at-home...etc{972ce4c6-7e08-4474-a285-3208198ce6fd} is the GUID of the Default theme (Tools > Add-ons > Appearance/Themes) that is now located in the ZIP archive omni.jar<br />
You can ignore that error in the Tools > Error Console.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Corrupt_localstore.rdf -
Visual Studio Publish Manifest file error
Using clickonce, my VB.Net 2013 app fails to run with a missing manifest file error:
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime : 4.0.30319.34014
System.Deployment.dll : 4.0.30319.34243 built by: FX452RTMGDR
clr.dll : 4.0.30319.34014 built by: FX45W81RTMGDR
dfdll.dll : 4.0.30319.34243 built by: FX452RTMGDR
dfshim.dll : 6.3.9600.16384 (winblue_rtm.130821-1623)
SOURCES
Deployment url : withheld
IDENTITIES
Deployment Identity : TeeShirt.application, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0d23f3063317ed13, processorArchitecture=msil
APPLICATION SUMMARY
* Installable application.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of F:\TeeShirt.application resulted in exception. Following failure messages were detected:
+ Downloading teeshirt.exe.manifest did not succeed.
+ Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
+ Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
+ Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [4/17/2015 5:01:20 AM] : Activation of F:\TeeShirt.application has started.
* [4/17/2015 5:01:26 AM] : Processing of deployment manifest has successfully completed.
* [4/17/2015 5:01:26 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [4/17/2015 5:01:26 AM] System_Deployment.Application.DeploymentDownloadException (Unknown subtype)
- Downloading file: Files/TeeShirt_1_0_0_0/TeeShirt.exe.manifest did not succeed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri& appSourceUri, String&
appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Net.WebException
- Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
- Source: System
- Stack trace:
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- Inner Exception ---
System.Net.WebException
- Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
- Source: System
- Stack trace:
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- Inner Exception ---
System.IO.DirectoryNotFoundException
- Could not find a part of the path 'F:\Application Files\TeeShirt_1_0_0_0\TeeShirt.exe.manifest'.
- Source: mscorlib
- Stack trace:
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean
useLongPath, Boolean checkHost)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.Hello,
When did that issue occur? When you publish your application or install?
Based on the error message, it seems that it throws this error when you install that application, right?
If possible, you could share the detailed information of your clickonce application with us, like where you deployed your application, a shared folder or a website, or even a local folder?
To narrow down this issue, you could check whether there is any manifest file inside the published folder.
If not, then you could consider republish it again to see whether it could generate any manifest file.
If so, then you could confirm whether the user have permissions to access that folder to download that file.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.
This is pretty much it, It was in my error console and its there
every time I check on my errorsI used the 64bit win7,when I start firefox it will be no response just in one
minute ,the console show me this error :Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest! -
Validating Manifest File Error
Upon publishing my file, I run it through the ReloadScormPlayer 1.2. and get the following error with the manifest file. Any ideas as what I need to do to fix this?
Problem validating manifest
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-id.2: There are multiple occurrences of ID value 'ahs_cont_scor_062309'.
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-attribute.3: The value 'ahs_cont_scor_062309' of attribute 'identifier' on element 'item' is not valid with respect to its type, 'ID'.Upon publishing my file, I run it through the ReloadScormPlayer 1.2. and get the following error with the manifest file. Any ideas as what I need to do to fix this?
Problem validating manifest
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-id.2: There are multiple occurrences of ID value 'ahs_cont_scor_062309'.
(file:/D:/Documents%20and%20Settings/kawittrock/reload/reload-scorm-player/server/webapps/ reload-scorm-player/course-packages/2009%20Scoring/imsmanifest.xml: 95, 102): cvc-attribute.3: The value 'ahs_cont_scor_062309' of attribute 'identifier' on element 'item' is not valid with respect to its type, 'ID'. -
i updated firefox and now I can't access the net on any browser. Wireless router everything is connected and up and running. Just not the browsers. uninstalled it, reinstalled it (didn't work), unistalled it again and internet explorer won't work either (not at anypoint after intial update was run. read several peoples simalr problems with the "could not read chrome manifest file" issue and solutions to no avail. uninstall and system restore did not work either. What did it change on my system, and how can I change it back?
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox -
Package load Failed! Invalid package Title, manifest file cannot be found
Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AMHi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian -
Need help with a manifest file
I'm trying to make a jar file executable, and I've seen numerous questions and answers regarding this particular issue, and none of them helped me with my problem.
I have a batch file that runs the application without any problem, but when I try to create a manifest with the main class attribute copied char by char from my batch file and run it, I get a message "could not find the main class".
I been browsing the web for the past 4 hours* now and the only type of answers I see for that problem is something like this:
...Main-Class... "${main.class}".
This type of solution is worthless to me, since it doesn't tell me why my path is correct when I use the .bat file and incorrect when used in a .jar file.
Thanks,
Omer.I read there the related topics.
However, it wasn't even close to being helpful.
I'm using ant and the inner build.xml syntax is probably eluding me somewhere.
In fact, if it was possible to find an example build file that was written for ant 1.6 or later and contains the Main-Class attribute (I've seen some examples that contain an example file, but none of them contained the Main-Class attribute, and I found some Main-Class examples but none of them showed where they should go or how they should appear within the manifest file.
I'm at the point when I'm about to give up the whole idea and provide the unprofessionally looking .bat file.
I thank anyone who has put his mind to this issue, but if there is no build.xml example, I guess you can't help me.
Thanks anyway.
It's frustrating to see how the most flexible language there is to work with when coding, becomes next to impossible to work with when you need to deploy it.
Update, 30.04.2008:
I have managed to figure out that the problem wasn't with the main class, but with the classpath.
I run the program from Intellij, and everything works perfectly. I use a batch file, and perfect. I try to use an Ant generated jar with the classpath attribute set exactly like the batch file's paths, and nothing.
There is no error message either.
The classpath is located under "/lib/*.jar" in the distribution directory, where the "program.jar" is located.
I have come to the point that i would pay to see a proper working build.xml and to see the relative and absolute paths of the classpath.
This is actually harder than developing an extremely rich server application.
Edited by: omerk76 on Apr 30, 2008 11:04 AM -
Help using manifest file classpath.
I have a jar file (A) that is dependant on another jar file (B). When I run my app, which references jar A, if it doesn't also include jar B in its class path I get an error referencing jar B (as expected)
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/apache/commons/io/FileUtils
But if I add the following to jar A's manifest file:
Class-Path: E:\commons-io-1.1.jar
if get an error referencing jar A
java.lang.NoClassDefFoundError: utilities/gui/ExitApplicationProducerOk, now I have "Class-Path: .\commons-io-1.1.jar"...That's still Windows-specific. If you want it to be relative to the referring jar, then simply specify commons-io-1.1.jar without the windows-specific path notation prefixing it.
-
How to use manifest file to indicate the entry class?
I am trying to package all my class files together and let the users to run my file using the following command line:
java -jar program.jar
For this purpose, I need to specify the main class in the manifest file. I create the manifest file as below:
Manifest-Version: 1.0
Created-By: 1.3.0 (Sun Microsystems Inc.)
Main-Class: classname
and include it in the same directory as my class file. then I jar all the files using:
jar cvmf manifest.mf program.jar *.*
However ,when I try to run the program using:
java -jar program.jar, I get the error message:
Failed to load Main-Class manifest attribute from program.jar.
What have I done wrong? pls help!!! thanks a lotHi.
here one example:
Manifest-Version: 1.0
Main-Class: Solitaire.RunMe
Created-By: 1.3.0 (Sun Microsystems Inc.)
you may run it by : java -jar Solitaire.jar, or doubleclick over the Solitaire.jar
the main class is RunMe in package Solitaire.
so the complite path would be Solitaire.RunMe.
enother one
Manifest-Version: 1.0
Main-Class: RunMe.RunMe
Created-By: Forte for Java v. 1.0
you may run it by : java -jar Transmission.jar, or doubleclick over the Transmission.jar
the main class is RunMe in package RunMe.
so the complite path would be RunMe.RunMe. -
Problem with jar file & loading manifest file
Hi Friends
i developing one application using java Swing
i deploying the whole application using the jar Utility.
but while installing & deploying this application on my machine & on the another machine error occured
which showing that failed to load manifestfile from main module Or Main class.
why this is happen? any other Java settings OR changing in java settings of the machine required while deploying this application on the other machine
please guide me.Show the contents of the manifest file,
and what command you used to run the program,
and what directory you ran the command from.
and what's the current classpath setting (if any). -
"Could not find project's extension manifest file."
I am trying to load the Illustrator SDK sample FreeGridUI. In the documentation supplied by adobe, it says:
1. In the IDE, choose File > Import > Flash Builder > Flash Builder Project.
2. Select "Project folder" and browse to SDK_root\samplecode\FreeGridUI.
3. Click Finish to import the project.
4. Build the project.
When I do that I get an error message that says:
"Could not find project's extension manifest file. Make sure the manifest exists at .staged-extension/CSXS/manifest.xml."
But as you can see from the attached screen shot, the manifest is in that exact location.
Also when I edit the manifest in the "bundle manifest editor" and then close the manifest tab, is asks me if I want to save the manifest. When I choose yes and re-open the manifest... none of my changes have been saved.
Anybody got any ideas?
-BillOkay,
I feel stupid, but I also feel like adobe should feel stupid too. Turns out I missed the "." at the beginning of the ".staged-extension" path. But adobe put that folder in their sample without the "." in front. So much for a "working sample." Anyway, I dropped into terminal and did a "mv staged-exnestion .staged-extension" and now all is well. Hope that helps someone. Sorry for crying wolf.
-Bill -
Problem with manifest file and Plateau LMS
I have published a course with a quiz in SCORM 1.2 and tried
to upload to a Plateau LMS.
It seems that a "page cannot be found" message is the result
after upload and we try to launch the course. The course works
outside the LMS (when run locally on my computer).
The Plateau LMS support team tried to help, and found the
following: "There is something wrong with this manifest, though I
cannot ascertain what that is exactly. Most of the file name is in
the parameter field, which is causing the launch path to look like
this:
/content/apmm/cbcgis/mars/BRTMAIN/MARS?BRT%20Maintenance%20Template_%2020080226.htm=
Everything in the parameters field is placed after the
filename in a URLencoded querystring after the question mark that
you see above. it should look like this:
/content/apmm/cbcgis/mars/BRTMAIN/MARS BRT Maintenance
Template_ 20080226.htm"
Can anyone please help resolve this, or have any advice?
This is the first time we have tried uploading Captivate
courses to this LMS, and we have been having problems with the
manifest file in general. I have looked at all the material I can
find on publishing and the manifest file, but cannot seem to
resolve my issue.
Thanks
WarwickWarwick,
I have had this error with an Authorware set of SCORM files
when my LMS was looking for index.htm and I had named it index.html
- you wouldn't think that would cause an error but it did. I would
be more than happy to package a Captivate file of just a few
screens that works on my LMS (which is Learn.com's Learning
Center), and send you the SCORM files to test... That could be a
start anyhow. I will send you a private msg. with my e-mail
id.
Maybe you are looking for
-
Labview executable does not open excel...
i just compiled labview code into an executable and when i run the executable, it does not open an excel document like it is supposed to. it opens the excel program, but not the specific file stipulated in the code. the problem only exists on one of
-
I have a problem in imessages I can not log on
I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"
-
Alpha Output with Media Encoder
Hallo I would like to use the "Export to Adobe Media Encoder" command in After Effects to send a comp with an Alpha Channel to be coded in the Media Encoder, but this workflow doesn't seem to support Alpha Channels, or am I missing something? I am us
-
Upgrade from Elements 5.0 for Windows to the latest version of Elements for Mac?
Can I buy an upgrade from Elements 5.0 for Windows to the latest version of Elements for Mac?
-
I Want to Give you Tickets to see Your Favorite Band or Sports Team!
Alex_B wrote: $50 won't cover it all, but it sure will put a dent in the price! A little help is nice sometimes and its a good start for most shows.Besides that is $50 you can pocket for that expensive Concert or Game day beer!