Error "massage not found in main memory"

While generating report in Portal, I am getting error message.
'Message Not Found (in main memory) '
Please help me
B/R
Faiz

No We we didnt get any error in RSRT and not even Portal... It is not reproducible...This error reported by Customer...
I asked to reisntall Application like I.E / SAP GUI / BEX etc.. She did that but still have the problem....

Similar Messages

Error "No message found(in main memory) " while creating new vendors

HI Experts,
I have just join a already going SRM project , i am creating vendors in SRM using su01 and then assigning a BP with the role of employees to that vendor.
But when i logged in to to the portal for the bid submission i am getting one alert message which states that
"message not found(in main memory)".
but if i am using already created vendors(some one else has created it before i joined the project) then it is working fine in the portal.
i have defined relationship also as it was done in those vendors still its not working.
Can any one help me in this.

Hi,
Please go through the follwoing notes:
Note 1037262 BBP_QUOT_BOB: Surrogate Bid receives Message not found error
Note 684024 Error "Message not found (in main memory)"
Thanks,
Pradeep

Error in integration Log not found (in main memory)

Hello Experts,
We are facing an error at the moment when we send a contract from CLM to the ERP, we run the transaction BBP_ES_ANALYZE and the error that we got is Log not found (in main memory).
We already reviewed all master data integration, any other suggestions?
Also, this integration was working fine at the beginning, but Basis team applied an update to our ERP system and after this it generates this error.
thanks in advance
Kind Regards

Hi,
Can you check the settings as per blog Debugging MA publish to ERP?
Unless the activate log is set, BBP_ES_ANALYSE will not be able to provide much information.
Ashwin

Background Job - Log Not found (in main memory)

Gents,
I am triggering a background through an RFC using JOB_OPEN,JOB_SUBMIT & JOB_CLOSE
the program associated with the Job is put in to execution immly I don't have any problem
but some Jobs are in Cancelled Status coz the program was terminated due to the Error Message
Log not found ( in main memory ) Message Class - BL Message ID - 207 all the cancelled jobs are
having the same message.
It's pretty sure that this message is not issued by my background program.How to get rid of this
is there any SAP Notes.
Best Regards-Sreeni Anbarasan

Check out if there has been any update error in VA02 using transaction SM13.
Lokesh

Update Rules inactive-Log not found in main memory

Hi
I am trying to active update rules but it is failing with log not found in main memory.
I tried update rules syntax check and system says no error when checking the update rules.
What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
Regards
Vennela

Check out if there has been any update error in VA02 using transaction SM13.
Lokesh

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Proxy Generation internal error object not found.

Hi
We have BW-XI implementation .Recently an error has started popping up , while the checking the proxy in tcode sproxy.
Error is - Proxy generation internal error , <message> not found, check failed . However when I double click on the proxy and do a check its fine and we are able to load data in BW successfully .
Does any one have a clue on this and how important is this check on the first screen of sproxy ? Thanks in advance .

Hi......Kapil,
proxy's mainly based on msg interfaces.with out creating msg interface we can't do proxies.For this logon to IR & create data & msg types & then msg interfaces.
after complition of this process.Under proxy generation screen u can see the following details .......
Ur data type,msg type,& ur interface...
regards,
Naresh.K

Error: Resource not found: ${SCRATCH_COMMAND_ICON}.

Hello ,
I have just installed SQL Devloper Version 4.0.0.12 [Build MAIN-12.27] on on windows7-64Bit machine.
I just observed following error on Extensions log window.
-oracle.sqldeveloper.migration.application
Error: Resource not found: ${SCRATCH_COMMAND_ICON}
Note: I already had delppoyed Oracle SQL Developer 3.2 Release
when i double click the error its taking me to extension.xml line : <property name="SmallIcon">res:${SCRATCH_COMMAND_ICON}</property>
and i see "java.io.PrintWriter@57fff4da" line in Messages-Log window.
Hope this error doesn't create any problem. Any Idea ?

Getting the same error, and I am trying to use the database migration tool.
Under the Extensions Tab:
     oracle.sqldeveloper.migration.application
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
          Error: Resource not found: ${SCRATCH_COMMAND_ICON}.
Message was edited by: dbcapoeira

[SOLVED] pacman error: database not found (during an install)

i am trying to install an app
when installing
# pacman -S /path/to/dir/app.tar.gz
error: database not found
when i look inside the tar, theres only one file, app.bin
im sure its some fundamental that im missing. so i have to makepkg first , or am i missing a command during the intallation, or is the file broken?
Last edited by wolfdogg (2011-06-04 05:50:09)

well, im geting some errors with the program, im wondering if i need to make a package? i think i will try that next.
heres the beginning of the log, Java errors mainly
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.equinox.ds
!MESSAGE
!STACK 0
org.osgi.framework.BundleException: The bundle could not be resolved. Reason: Missing Constraint: Import-Package: org.eclipse.equinox.internal.util.event; version="1.0.0"
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolverError(AbstractBundle.java:1313)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.getResolutionFailureException(AbstractBundle.java:1297)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:309)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.resume(AbstractBundle.java:370)
at org.eclipse.osgi.framework.internal.core.Framework.resumeBundle(Framework.java:1068)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.resumeBundles(StartLevelManager.java:557)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.incFWSL(StartLevelManager.java:464)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:248)
at org.eclipse.osgi.framework.internal.core.StartLevelManager.dispatchEvent(StartLevelManager.java:445)
at org.eclipse.osgi.framework.eventmgr.EventManager.dispatchEvent(EventManager.java:227)
at org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run(EventManager.java:337)
ok, i downloaded a different binary of this program, and it installed successfully. thanks for the help
Last edited by wolfdogg (2011-06-04 05:49:37)

Sapgenpse error - interpreter not found

HP-UX IA64: 11.23
SAP: NW 7.0 SR3
Libsapcrypto.so version hpia64-11.23-64
Hi,
I have two HP-UX 11.23 servers and I am trying to activate SSL on these. On one of the servers with SAP WebAS 7.0 SR2, its works fine and libsapcrypto.so loads fine. On this server, I can also execute ./sapgenpse -h to take a look at the options available.
On the other server with SAP WebAS 7.0 SR3, when I execute ./sapgepnse -h, I am getting error:
interpreter "*******************
" not found
exec(2): could not load a.out
When I copied the SSL files initially, there were permission errors which I resolved through changing both sapgenpse and libsapcrypto.so to 777. Now, upon starting SAP system, it just hangs at the stage where it tries to load the SSL library. I then shutdown the server and tried executing sapgenpse separately but am getting the above-mentioned error.
Can anyone suggest what I might be missing here.
Regards

On the server where libsapcrypto works fine, I can issues ldd command to see
ldd libsapcrypto.so
libpthread.so.1 => /usr/lib/hpux64/libthread.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
But on the machine where I can run sapgenpse, ldd gives an out of memory error. Can you propose what I should be looking at to address this issue?
Thanks and regards

BI Administration cockpit, error 404 Not Found

Hi all,
I just installed the BI administration cockpit. I loaded the TCT cubes and installed the BSP in the portal.
When I execute the templates that the iviews of the BI cockpit use it works fine. However when I execute the cockpit in the portal (executing the iviews) it gives the following error:
404 Not Found. The requested resource does not exist.
Details: Go to main page of this application!
The 7.0 templates/iviews that I created myself are working fine in the portal. Is it possible that this has something to do with the fact that the BI Cockpit is based on 3.x templates? Are there additional settings that I have to do in the portal? I have the same problem with the broadcaster which is also partially based on 3.x templates.
Thanks for your help,
Guus

Hi Guus,
You may wish to refer the Note 1057129 - '404 Not Found' error when you export a business system.
Note 828474 - Inconsistencies in Application Aliases in HTTP Provider
Hope this helps.
Regards,
Anil

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

Error File not Found in CS 5.5

When I go to open up PP CS 5.5 it provides a list of possible projects I can open up. Click on a project and it opens accordingly. However, over the past 2 days it has become problematic. I can click on the listed project but I now receive an error message: Error file not found. PP will not open up. I haven't moved any files, folders or projects around. I have simply closed the project, quit PP and then opened it again when wanting to edit. I have tried opening up the auto saved project file and I receive the same message?

Hi Todd both your solutions (and the one suggested by Colin) works initially. Dbl click the project file and it opens PPro. However, I tried this on another project which has a 3rd party pllugin (Smartsound Sonic Fire Pro) in it. Things get interesting with Smartsound being activated with me unable to quit out of it and I am not able to access Premier Pro. I have to Force Quit both programs. Then when I try to dbl click on the program that opened up OK the error message returns: File format not supported. There is no Smartsound file involved in this project? Same thread? New thread? many thanks for your responses

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Error "massage not found in main memory"

Similar Messages

Maybe you are looking for