Error massege m7000 "Entry 7030000144 00001 not in table XACCOUNTING_CR"

Hi Experts,
I created a service PO with one line item and i want to post service entry sheet with multiple account for same PO, when i am trying to post service entry sheet that time i am facing below error.
Entry 7030000144 00001 not in table XACCOUNTING_CR (system error)
Message no. M7000
Diagnosis
Internal error.
Procedure
Inform the person responsible for programming or your system administrator.
pl. guide me how can i resolve this issue.
Regards,
AM

Hi,
Consult with your BASIS person make necessary changes as instructed in SAP note 1386249 "MAA: Entry is not in table XACCOUNTING (system error)"
The reason is only seeing cannot be implemented is not enough so you need to ask your BASIS guy
as the note clearly says
Solution
The corrections are delivered with the relevant Support Packages.
If you require these corrections in advance,
correct the source text in accordance with the correction instructions.
In addition, you have to add missing entries to the table EKBE_MA using the attached
correction report.
Links to Support Packages
Software Component .....Release........... Package Name
SAP Application................. 604................ SAPKH60406

Similar Messages

Keep having this error: The procedure entry point_objc_image could not be located in the dynamic link librrary objc.dll.

itunes sync is not working on a new device, tried to update to itunes 11.1 but this error keeps showing up now, and when I connect the ipod it says "itunes requires a newer version of the Mobile Device Support.

To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

In MIRO screen, if clicked on 'TAX' tab error 'Entry of tax not allowed in

Hi,
In MIRO screen, if clicked on 'TAX' tab error 'Entry of tax not allowed in current account line' is displayed. Message number FF847. What may be the reason for this error message?
Entry of tax not allowed in current account line
Message no. FF847
Diagnosis
If you enter a tax amount in the current account line, the system does not allocate the amount to one tax code, but instead to all tax codes that exist in the document. In this case, the amount needs to be split up using the rule-of-three procedure. The sum of the computed taxes of all tax codes is used as the comparison basis. If each of the computed tax amounts of all tax codes equals zero, the system uses the sum of the tax base values as the comparison basis.
System Response
If the respective comparison basis equals zero, the system issues an error message.
Procedure
Go to the tax screen or tax tab page and enter the appropriate tax amounts for each tax code.

Hi,
Please check SAP Note- 1551857 for the same.
Other terms
FF707, FF716, FF796, FF847, FB70, SAPLTAX1
Reason and Prerequisites
There is a program error.
Solution
Implement the program corrections.
When you choose "Cancel" on the tax screen during posting or simulation, the system returns to FB60 or MIRO again.
The message FF 847 on the "Basic data" tab page is suppressed for company codes with jurisdiction codes if no expense items exist.
Hope this will resolve your query.
Regards,
Sandesh Sawant

This Entry Already Exists in the Table (UDO1)

Hello All,
I have created a Document Type Form with one Document and one Document Rows Table .
Their is no Manage Series option checked in the Registration as it is without any series.
Now the entries were going smoothly untill the record no. 116 then after that the user tries to add the document no. 117
system is showing an error message " This Entry Already Exists in the Table ( UDO1) " and the data is not getting added.
I have checked the Header & Line Tables both tables conatins data upto 116 record.
But still is not getting saved.
Their is no Series feature in this form (No Manage Series ) the numbering the going as per SAP .
Please suggest how to solve this problem without hampering the already entered data.
Thanks & Regards,
Amit

Hello Amit,
Sometimes the restore document numbering function from help makes miracles....
By the Way, please check your UDO tables and look for keys, docentries, etc,
Regards
János

Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

No entry in key field of table MARM

Hi,
I am trying to import and create a Article Master using LSMW with IDoc method. ARTMAS IDoc is getting generated but it is showing error as No entry in Key field MARC, MVKE, etc etc and now finally stuck in No entry in key field of table MARM even after filling all possible data.
Function Module used here is BAPI_MATERIAL_MAINTAINDATA_RT. I don't know any technical aspects here to look into.
Kindly help me out with the information on what could have gone wrong here and what are the possible solutions?
Thanks & Regards,
Sudhanva Joshi

Hi Venu,
Now i am stuck in somewhat a deadlock situation. and this is in MARM segment. below are the issues,
1. If I provide an entry in Alternate UOM field in MARM, Ex: EA is base unit and PC is ALT unit, I am getting an error as ' The Alternative unit of measure is same as Base unit of measure'
2. And, If i don't give an entry in ALT_UOM field (which SAP suggests, in case there is no other units than Base unit, leave the ALT-UOM field as blank), I am getting an error as "No entry in key field of table MARM"
Can you please assist in resolving this issue.
Thanks & Regards,
Sudhanva Joshi

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

Was trying to update my ITunes and get this error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Just got the new IPhone and am trying to share music files. Can any

I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?

I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

Getting Error-- "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" on host machine.

I am trying to build an executible program that will be portable to machines which do not have CVI installed. It works fine on my CVI v9.1 system. However, whether or not I include "Full run-time support" in the build options, I get the error "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" when I try to run it on a machine without CVI. Please help.

To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.

Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.

Hey bcolden,
I would try uninstalling and reinstalling following the directions in here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section in particular contains important information in the uninstall process:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Best,
Delgadoh

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

Keystore config error: keystore entry alias is not specified

Hi all,
I have been using the java keytool to genkey, do certreq and import the signed cert so far. I am now at the stage of using WebLogic admin console to configure the keystore to use this keystore.
I am using WLS9.0. At the Keystore Config page, i choose Keystore to be "Custom Identity store and java standard trust store". The following is the identity store settings:
store location=/.keystore
store type=jks
store passphrase=xxxx
However, i encountered the following error messages: "Cannot retrieve identity certificate and private key on server AdminServer, because the keystore entry alias is not specified"
I looked up the weblogic's error messages list. It indicated that the problem can be corrected by specifying the alias in the SSL config. However, i could not find such an entry at the Admin Console.
Does the "alias" here mean the one we use in the keytool argument, eg. keytool -genkey -alias abc? Anyone has encountered this error message before? or can help to point out where i can specify this key alias?
Regards,
Celine

Celine,
Have a look at the SSL tab (next to the Keystores tab). You'll need to specify some data there including the private key alias. Yes, the alias is the same one you used with keytool.
Hope this helps.
Mike
Weblogic/J2EE Security Blog: http://monduke.com

Error massege m7000 "Entry 7030000144 00001 not in table XACCOUNTING_CR"

Similar Messages

Maybe you are looking for