Error-Master Data Load Fail

Hi Friends,
While loading master data from Process Chain, the load has been failed by having specail Characteristic in it. W e have edited that characteristic record in SAP R/3 system.
What we have to do now....... Should i have to Repeat the load Process in process Chain For that Object or should i do Manual Upadate from RSMO. There is another 2 process has to run below that master data object.
*************points Are Assured********
Regards
Revathi

Hi Revathi.....
Is ur load is through PSA?......look U hav edited in the source system.........not in BI side.......if the load is through PSA also.........records r still erroneous in PSA.......
Since u hav already edited in the source system............again editing in PSA is repeating the same job twice.........it is of no use.........
Since it is master data.................no need to delete the request from the target............actually data target means Infocube or ODS.........Master data is not a Data target.........u will not find the data target icon in the infopackage monitor or the data target tab in the infopackage Scheduler.........
Just make the QM status red and repeat the load in the PC............if it is a full load making the QM status red is not mandatory...............but for Delta..........it is mandatory...........since only then Init pointer will set back...........and the System ask u for Repeat delta.......
But another point...........Master data generally does'nt support Repeat delta...........if u try to do Repeat delta.........load will again fail with Update mode R.........then u hav to do re-init...........ie......
1)delete init flag
2)Do init with data transfer
3)then delta.....
Regards,
Debjani......

Similar Messages

Master data load fail

Hi Gurus,
My master data load is failing because of this error.
Record 20 :0CAT_GROUP : Data record 20 ('000200000012 '): Version 'D $$OSS001 ' is not valid
I went back to PSA and found out that I have 6 error records with values $$OSS001 .
0CAT_GROUP is a attribute of master data object
I checked in the master data extractors.These values are coming from ECC .
Can some one tell me how to get rid of these values and reload to Masterdata without errors.i am using BW3.5
Anyhelp would be appreciated.
Neo

You probably have to make appropriate change in settings in RSKC to allow certain characters. Otherwise the best way will be stop these at source, if they are really 'bad' data.
You could also visit the link below:
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
alternatively, you can write routine in transfer rules/ transformation by using
CALL FUNCTION 'RSKC_ALLOWED_CHAR_GET'

Time dependant Master data load fail (Invalid time interval)

Hi,
I have IO 0HRPOSITION which is time dependant master data.
When I load master data I have maintained from date 01.03.2007 to end date 01.12.999 in scheduler.
But there are some positions records in HR system which have from date less than 01.03.2007 and because of that master data load is failing everyday.
How I can load only those records which fall in-between from date 01.03.2007 to end date 01.12.999???
Thanks
Pramod

Hi Pramod,
I think you can put a selection in the Infopackage.
Thanks

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

Master data load failed

Hi Experts,
One of my master data full load failed, see the below erro message in status tab,
Incorrect data records - error requests (total status RED)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target.
The request was marked as incorrect so that the data that was already updated cannot be used in reporting.
The incorrect records were not written in the data targets but were posted retroactively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors and post the error requests. Then set this request manually to green.
can any one please give me solution.
Thanks
David

HI,
I am loading the data from application server, i dont have R/3 for this load. and the below message is showing in status tab;
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
Thanks
David

Master data load failed due to duplicate records .

hello friends ,
need some help .
I am loading the master data from soruce sys , and it is throwing error of duplicate 56 records.
I repeated the step , but found the same error once again .
i could not find out the duplicate record , as thr are more than 24000 records , and in this 56 are duplicate . and this duplicate also looks like same.
when i click on error records , it is showing me the below procedure .
maintain the attribute in Psa SCREEN .
I could not find the duplicate records , could you please let me know how can i maintain this .
Regards

Hi ,
Reload the masterdata by cheking ignoreduplicate records check box.since the master data has overwriting capability the duplicate records will be overwritten
cheers,
Swapna.G

Master Data load fails because of Duplicate Records

Hi BW Experts,
I am loading historical data for a info-object using flexible update, first i tried to delete the data but it was not possible as it is being used in infocubes and ODS, As i am doing the rework of that cubes, ODS so i have to reload the whole data again. Anyway without deleting i tried loading the data in the info-object but it has thrown error that dulicate records found, I tried again then it has thrown an error ALEREMOTE has locked the object or lock not set for the object.
Please suggest me what to do in these scenario.
Please consider it as urgent.
Thanks in advance.
Sunil Morwal

Sunil,
First unlock the objects.go to SM12 give ALEREMOTE user name then list...select the request and delete.
Load the data from PSA....
OR reload... rememeber you will have one option at infopackage level in processing tab "<b>Ignore duplicate records"</b>.
Let me know the status.
Thanks
Ram
"BW is Everywhere"
Message was edited by: Ram

Master Data Loads

Hello,
Some of my master data loads failed. It gives me following error:
Lock NOT set for: Loading master data attributes
Attributes for characteristic " " are locked by a terminated change run
what is this lock? how to rectify the same? what can be cause of this problem.
Regards,

Hi Abhijit,
You can go to RS12 and see the status of the locks of the master data. You can even delete the locks there though not advisable. The chances are that attr/hier change might have been running for some info-obj which was causing the problem.
You could now try 2 things:
1. Try the load again. OR
2. Delete the locks and then try the load.
Bye
Dinesh.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

R/3 Master Data Load Error

Hi Experts
Our master data load from R/3 to BW was failed today.
This is the error message on status Tab of failed request
Diagnosis
No IDocs could be sent to the SAP BW using RFC.
System response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
Further analysis:
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
I navigated through Environment -> Transact. RFC -> In source system"
In R/3 i got the following error
timeout during allocate / CPIC-CALL: 'ThS
#Timeout during connect
How shall i proceed now.
Thanks

Hi,
Check the RFC connection between R3 and BW. Use transaction SM59 for the same or take help from the BASIS team.
If that is correct check the EDI partner profiles, if they are active and functioning properly. You can take BASIS help here.
Cheers,
Kedar

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Bi admin process chains- content master data load has failed

Hi Experts,
i worked with Bi Admin cockpit set-up, all the things are going fine
but Content Master data load (Attribute)has failed and i got the errors like
1)data records for package 1 selected in PSA-2 errors
2)Error 4 in the update
can anyone suggest me how can i sove the issue
regards
Mrudula

Hi
yes, i got 2 errors in Psa
when i click the 1st error i got like
Data record 10023 & with the key
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
And i it gave the procedure as
if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
And when i click the 2nd error
it has showed the data record as 10024 and remaing explanation is same like 1st one
in this i am not getting, how to proceed the solution.
plz help me anyone
Thanks and regards
Mrudula
Edited by: mrudularajesh on Jul 1, 2009 7:39 AM

Loading error "Master data/Text of Characteristic ZMAT already deleted"

Hi,
I have some problem about SAP BW loading.
while loading I'm getting this error "Master data/Text of Characteristic ZMAT already deleted"
and loading is failing.
So when I try to loading again sometime loading is completed but sometime is failed with this error.
I try to find out root cause and I check table RSMASD there is ZMAT entry this table.
How do I remove the entry?
How can I fixed this problem ??
Now my SAP BW is 3.0 B and support package 26
Hope this helps...
Sumaru

Hi,
Check table RSMASD or SM12 for an entry there.
RSMASD should be blank normally.
SAP Note Number: 936694, 946992 and 936694.
Try
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Re: Data Load Error due to Master data deletion
Hope this helps.
Thanks,
JituK

Master data loading delta failed

Dear All,
For master data loading, last delta got failed. we tried the reason for the failure but we couldn't find it. we want to know how to do last request repeat delta.
Good day.
Thanks and regards
Arun S

Hi Arun
Check the data in PSA. You can find erroneous data in PSA and correct the same. Save the data in PSA. You can manually update the data from psa or in process chain just repeat the delta step. Before doing that delete the error request from the data target.
Hope this helps.
Edited by: Chandamita Sarmah on Jul 6, 2009 2:04 PM

Error-Master Data Load Fail

Similar Messages

Maybe you are looking for