Error material not maintained by purchasing when creating info record

Hi Expert,
I have an issue when creating info record, error says "Material ******* not maintained by purchasing". I've checked in MM03 purchasing view, all has been maintained and at the bottom there is message says "No plant-specific data exist". Accounting view also maintained. I've also checked in MARC table for this material and plant. It existed. I cannot see anything wrong on the material master setup but not sure why am i having this error...
Please help.
Thanks,

Hi,
Error says "Material ******* not maintained by purchasing" & you checked purchasing view has been maintained.
OK. Just cross check following optionS
Option-1: You creating info- record for material with combination of plant & vendor....check did the material have purchasing view for same plant-the info-record you are creating!
Option-2: If no purchasing view for material with same plant , just extend in t.code MM50 for E Purchasing
Option-3: Check the material for same plant, did Procurement type F (External procurement) is there
Option-4: Check Profit Center in Plantdata/ sto-2 view of material.
Regards,
Biju K

Similar Messages

Error : Material not maintained by purchasing

Hi to all ,
I am getting an error msg :Material not maintained by purchasing in Pur Info record
When I created a new matl in MM01, in the matl type : raw matl , info record is created .
But when I used the matl type Semifinished , finished the above error is coming .
Also I tried the completing the purchasing & pur text views but the same error repeats
Kindly help !
Prem

Hi
First extend the purchasing view.
second check it in the mrp-2 view procurement type should be X or F.
Pls check it
Regards,
Raman

Material not maintain by purchasing

hi guys
when i tried to convert the planned order into purchase requesation for material type semi finished.but te system show error " material not maintained by purchasing "
but i maintain purchasing view for the same material .
pls lighten me
with regards
v.raj

Hi Raj
checkwith MM02 and select the purchasing view and see for any warning message if it exists then you have not created the Purchasing view properly.
Now
excute MM01, enter the same materal #, type and other data, select the purchasing view and (Optional enter the Purchasing value Key ) then save and now you try
you will not get the error
Hope this helps
BR
SK

Material not maintained by purchasing : error in purchase requisition

Dear Experts ,
I have created a new material of material type ZSPR where the purchasing view is already extended. I can see
the purchasing view after selecting the plant in the material master. But when trying to add the line item in
Purchase requisition for this material ,then i am getting message "Material xxxxxxxxxxxx not maintained by
purchasing".
when I go the material master & click on the purchasing view , message in bottom is shown with tick in green
round background "No plant-specific data exists"
I have created hundreds of materials in past 10 days , but this problem comes only for 3 to 4 materials.
Kindly advise how to resolve.
Thanks in advance.
Regards,
Anil Shanbhag

Hi Anil,
Good day.
This problem occurs because there is no purchasing view plant specific i.e. you may be extended the purchasing view for some other plant.
1. Go to MM01.
2. Select Purchasing view.
3. Enter appropriate plant.
4. Enter relevant data & save.
If this doesn't help revert back.
Regards
Anil

Throwing error when Creating Info record

Hai,
When Creating Info record . I maintained standard Qty, Min qty ,price and Planned dely time .
It is not saving and there is an error message that "Maintian all entries in Reqt fields" and Cursor is blinking at Planned delytime . and Not saved/
Can any one solve my issue.
regards
Madhav

Hi madav ,
create inforecord me11
vender name
mat
purchase org
plant
maintain that and enter,
go to text maintain, then click on condition hear maintain as per as the requirement,
go back
click on purchase organization data then save
u will not get error .
hope it will help u .
thanks
BIswa

PO not creating for the matl,giving error Material not maint for purchasing

Hi SAP Gurus,
When I am trying to create PO for 1 purticular material, system giving error " Material CG056A not maintained by Purchasing Message no. ME 046 " Please let me know in order to create PO successfully what are all the purchasing related information necessary to maintain for this material.
Thanks and Regards,
SHARAN.

Hi
While creating the material you have not maintained the purchasing view, hence you are getting an error.
Maintain the purchasing view for the material in MM01, which will solve the problem.
Rgeards
girish

Error when creating info record

Hi there:
When I am creating info record,and trying to enter 9.9 eur per kg,but the system popped up a error message and saying that enter a numeric value,what's wrong?

you may have to enter 9,9 instead of 9.9
This is base on the decimal setting in your user profile. you can adjust this in SU3 transaction yourself

Material not maintained by purchasing

Hi all,
Is there a way to check that a material number is maintained by purchasing? I know that this can be achieved by going to MM01 and then extending the view to purchasing. Is there a way to do this by checking any fields in the MM Tables?
Regards,
Deborah Tan

hi,
You can see the all details of the materials in the respective table....There is table called MARA - Material master general data....here you can look for the fields which are maintained for the material.....
For the valuations of the materials use table MBEW....
On the other hand you can display it from the material master itself in the MM03....
Field for Base unit of measurement - MEINS
Purchase value key - EKWSL
Valid from - DATAB etc...pls check...
Hope it helps..
Regards
Priyanka.P
ASSIGN POINTS PROPERLY AND THEN CLOSE THE THREAD
Edited by: Priyanka Paltanwale on Oct 22, 2008 9:24 AM

Error: Not Maintained by Purchasing

We have just set up a new material in our system.
When we try to enter a Purchase order for this material we get the following error message...
"Material XXXXXX not maintained by Purchasing"
What is causing this error and how can I correct it?

IN MM03 transaction enter material and select views tab
You will get many view like below.In that select Purchasing view then select org units .You can see your material maintained for your plant or not.
Basic Data 1
Basic Data 2
Classification
Sales: Sales Org. Data 1
Sales: Sales Org. Data 2
Sales: General/Plant Data
Foreign Trade: Export Data
Sales Text
Purchasing
Foreign Trade: Import Data
Purchase Order Text
MRP 1
MRP 2
MRP 3
Check MARC table also for your material maintained in which plants.Transaction code Se11
Edited by: Sridhar Jayavarapu on Dec 3, 2009 6:55 PM

Material GTS-14003X not maintained by Purchasing

1. How can i correct this error "Material GTS-14003X not maintained by Purchasing".
2. Also during material creation(MM01), many views are there for a combination of material type and industry sector.But during creation i select few views but did not select, say Purchasing view. Now in Chage mode during MM02 if I want to have purchasing view also, then how can i do that?
Pls help.
Kind Regards
Sajid.

Dear,
You need to slect it in MM01 so go to MM01 enter materail GTS-14003X then select the purchasing vie and maintain it.
Regards,
R.Brahmankar

Error "Material not subject to inventory management in Plant " on the STO

I want to create a Stock tansport order ( plant to plant transfer) with stock & non-stock item and non stock item is giving an error "Material not subject to inventory management in Plant". Please tell me how to clear this error. Plant / SLOC view is already maintained and no qty/value update selected on the material type because of non stock item. Please tell me how to overcome this error on the STO

Hello,
As you said you want to move nonstock item through STO.
It seems that in your case say for example your plant 1000 has material ABC which is maintained as stock item.
Now you have another plant 2000, whaich has same material ABC which is maintained as non-stock item (generally used in third party sales or cross docking).
If your material ABC is nonstock in plant 2000 where no stocks are mainatined, then how can you move the stock to plant 1000 where it is stock item.
Could you please confirmthat can you see the stock in MMBE for plant where that material is maintained as non stock item.
If so, then you have chnage the plant specific material status for that plant from non stock item to stock item.
This is maintained in material master in purchasing view.
The other way out is you have to third party sales with ship to party as the plant where that item is maintained as stock item.
In this case flow is
Sales order>>Purchase requistion>>Purchase order>>(Vendor supplies material directly to customer (which is you plant where that item is stock item))
Br,
Tushar
Instead you can acheive

Error: material not subjected to inventory management in a plant

While creating a STO . I am getting the following error
Error: material not subjected to inventory management in a plant
What should be done??????????/

Dear anamicabhardwaj ,
You need to check transaction OMS2 for the material type you use for the material.
Basically for STO which need to inventorized, the quantity updating need to check
for the material type, then only it can be inventorized. There is no other option but check
the quantity update indicator.
Regards,
ian, Wong Loke Foong

Why are the jpeg icons not visible in finder when created by PS6

Why are the jpeg icons not visible in finder when created by PS6

hi
I have faced the same problem ... I didn't find the solution yet
but please visit this link http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
you'll get everything you want to know
I'm not try it yet.
Best wishes

Creating of incoming invoice automatically when documen info record created

Hi all,
I apologize because I am asking many questions on this forum during the last few weeks, but I have some problems which I can't solve by myself in one project.
So, this time the question is about incoming invoices.
Here is the situation:
When our customer receives incoming invoice (in paper form) we scan it and send it to one Document management system. In that system we verify the invoice and approve it. After that step the document is released to SAP (only the document info record is created and that info record points to the original document (pdf file) in that DMS).
Now the question is:
Is it possible to automatically create incoming invoice (parked) when the document is released to SAP (it+s document info record created) and to create link between these two SAP objects? Basically it means that at the moment when doc. info record is created, the incoming invoice is created (only with mandatory data) and saved (parked).
We need this functionality because our client wants to have the access to original document (pdf file) when he is about to finish the incoming invoice.
So, is it possible to set up some parameters so that incoming invoice is created automatically after the document info record is created, and linked to that document info record?

I was not aware that u have already done coding to create DIR in SAP. In that case u don't need to rely on status triggering, u may create the invoice prior to DIR creation and then link it to the DIR.It can be done in the way u have mentioned. I.e. linking at the time of DIR with BAPI_DOCUMENT_CREATE.
I doubt we have any direct link to Incoming Invoice from DIR. One of the options i can think of is linking DIR to EKPO(Purchase Order Item) which is mentioned in Invoice.
Else u may need to add another object with object table "RBKP"
Following link will help u in creating new Object for development of new screens [http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm]
BAPI_DOCUMENT_CREATE2 is the latest BAPI instead of BAPI_DOCUMENT_CREATE.
Points Appreciated.

Is it possible to create info record without material number

Hi all,
Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
Thank you for the help.

Hi,
1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
2.Info Update indicator -
Info record update
    Determines whether the prices and conditions of this purchase order ite
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
reward if helpful,
Regards,
Chetan.

Error material not maintained by purchasing when creating info record

Similar Messages

Maybe you are looking for