Error"Max no of gateways exceeded (100)
Hi All,
We have two apps servers on our sap production system. I couldn't login in one of the app server through SM51 .when I tested the Internal RFC in SM59 I got this error-:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: max no of gateways exceeded (100)
Error Details LOCATION: SAP-Gateway on host hkbisrapl2 / sapgw02
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 52597
Error Details MODULE: gwxxrd.c
Error Details LINE: 8438
Error Details RETURN CODE: 631
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Sat Feb 14 13:00:36 2009
Error Details VERSION: 2
Pls suggest me the solution.
Regards,
Prashant
No, its R3 Production server. Internal RFC for one of the app server is giving this error.
When I tried to set the following parameters in the instance profile of the same I again got the same error while saving the profile.
Can I make the changes in instance profile of app server at OS level?
Profile parameters-: (On Application Servers)
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
Pls suggest.
Regards,
Prashant
Similar Messages
-
Max no of gateways exceeded (100)
Hi guys
Suddenly, I start to receive error messages about the RFC failure, No changes done in Basis related.
There are RFC error any many areas;
SM21 - I Maximum number of 100 connectable SAP gateways reached\
STMS - RFC communications error with system/destination TMSADM-PRD.DOMAIN_DEV
Sm59 - we cannot verify the RFC Connection
Please advise us on base of SOS
Regards
Anwer WaseemHi
Thanks for the expert reply, i did same as below described, there are 6 clients in the "logged clients" by the smgw.
0 DBSERVER1 sapgw02 Local Web AS DBSERVER1 ip dbserver1 Wed Jun 25 09:02:42 2008 Connection OK
1,037 DEV sapdp01 Remote Gateway DEV ip dev Wed Jun 25 08:38:04 2008 Connection OK
1,229 ip dbserver2 sapdp02 Remote Gateway ip dbserver2 ip dbserver2 Wed Jun 25 09:02:12 2008 Connection OK
1,292 QAS sapdp01 Remote Gateway QAS ip qas Wed Jun 25 08:38:04 2008 Connection OK
1,319 DBSERVER jlaunch External Client DBSERVER ip dbserver1 Wed Jun 25 09:02:12 2008 Connection OK
1,377 DBSERVER1 IGS.PRD Registered Server DBSERVER1 ip dbserver1 Wed Jun 25 09:02:38 2008 Connection OK
RFC Trace file
============
Sun Jun 22 15:01:03 2008
***LOG Q14=> GwIConnectHandle, max gateways (100) [gwxxrd.c 8504]
LOCATION SAP-Gateway on host DBSERVER1 / sapgw02
ERROR max no of gateways exceeded (100)
TIME Sun Jun 22 15:01:03 2008
RELEASE 700
COMPONENT SAP-Gateway
VERSION 2
RC 631
MODULE gwxxrd.c
LINE 8505
COUNTER 112523
I am unable to verify the RFC and unable to transport from QAS to PRD
Regards -
ERROR:max no of 100 conversations exceeded
Dear All,
I m tring to comfigure SAP XI(2004sr2) in 2nd step of SLD system : Connect SLD TO SEN (if CEN Present). I m getting following error
Element 'BAPI_SLD_SUPPLIER_CONFIG_SET':Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=XIDEV SYSNR=00 GWHOST=XIDEV GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR max no of 100 conversations exceeded
TIME Fri May 08 14:58:46 2009
RELEASE 700
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 466
MODULE r3cpic.c
LINE 10713
COUNTER 1
Element 'SAPDEMO.XID.Backend.Unclassified':!AbapConfigurationWriter.FM_CALL!BAPI_SLD_SUPPLIER_CONFIG_SET!AbapConfigurationWriter.FAILED!
Regards,
HitenHi Hiten,
Make sure that you have set the parameter CPIC_MAX_CONV under Environment variables --> system Variables.
For XI, the recommended value for this parameter is 400.
Regards,
Gopinathan. -
Broadcast - ERROR max no of 100 conversations exceeded
We've scheduled 3 reports to email PDF's to approx 400 users but the BEx broadcaster only managed to send out about 80 emails. in the various logs and traces I can see and error that states "ERROR max no of 100 conversations exceeded".
I can find various notes about this refering to various sytstem parameters but as far as I can tell our parametrs are set correctly e.g.
gw/max_conn 500
gw/max_sys 300
gw/max_overflow_size 10000000
gw/max_shm_req 50
rdisp/tm_max_no 200
rdisp/max_comm_entries 500
As I understand it from the notes we should increase the environment variable CPIC_MAX_CONV. However the note I'm looking at (316877) states that this environment variable is on the ITS server but from talking to our Basis support the version of netweaver we are running doesnt have an ITS server?? Dont really know what all that means. Any ideas on that one or about the error message as a whole would be greatly appreciated.
If it's any help I can also see in SM21 that at the time of broadcasting the users got the error:
> Conversation ID: 33568780
> CPI-C function: CMSEND(SAP)
Communication error, CPIC return code 017, SAP return code 450
Thren in the broadcast log via RSRD_LOG the users have the error:
Java communication error: Error when opening an RFC connection RSBOLAP017
ThanksHi,
Try using these threads, if you get some help from them.
/thread/174978 [original link is broken]
RFC_ERROR_COMMUNICATION--max no of 100 conversation exceeded
AI_DIRECTORY_JCOSERVER - ConnTest issue Error "max no of 100 conversation" -
CPIC_MAX_CONV - ERROR max no of 100 conversations exceeded
I recvd the "ERROR max no of 100 conversations exceeded" and I could resolve it by setting the environment variable CPIC_MAX_CONV to a higher value for my <sid>adm per note 316877.
What I want to know is where can i check to see if this environment variable actually took effect WITHIN IN SAP (I can see it set in env and when I echo the variable) ? Can I see this anywhere within the SAP land ... in its server logs , property files etc ?
Also in general when we make changes to environment variables at the OS level pertinent to SAP then where within SAP does this get absorbed and where I can see the new values.
Pls advise.
thank you
regards
LaxmiHi Laxmi,
Please check the below thread. I have given a possible solution in the thread.
Tcode SLDCHECK error
Cheers...,
Raghu -
Error during PO creation "Total BED % rate exceeds 100 % "
Hi.
Its concerned to Indian Excice.
Error during the creation of PO is " Total BED % rate exceeds 100 % " ,
( Message no. 8I453).
And you pls note in J1ID its 16% maintained for that perticular chapter id and its 100% for BED in tax code.
Can you pls tell me the reason for this error.
RegdsHi Santosh,
362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
And For BASB 605 is maintained in the field AltCBV.
Can you Pls explain the significance of this alternative calculation type.
Regds -
Hyperion Financial Reports Studio Error. Max No of connections exceeded.
I have encountered an error in FR Studio, it says Max No of Connections Exceeded.
It occured twice in this month, everytime it happens we need to restart Reporting and Analysis Framework. Can someone suggest where can I increase the max no of connections allowed?Ok...My bad..
You will have tun serviceconfig.sh under Hyperion_Home\products\Foundation\workspace\bin to bring up GUI,then From the menu available you will see Remote service configurator,select that and provide the credentials.After you login,there should RM1 and SB1.You will have to go o properties of RM1 and SB1 and then increase the connection.Restart is required for this to take affect.
Let me know -
ERROR max no of cpic clients exceeded (2000)
Hi all,
We are the error max no. of CPIC clients exceeded (2000) when logging through ESS Portal
Please help me to resolve this soon.
Regards,
KalyanHello Kalyan,
you will have Increase the value of the gw/max_sys parameter in the backend system
Refer to Notes 314530 and 894100 and you will be able to solve the issue
Let me know of any questions
Rohit -
SWL order Error message on monitor 'Sum of % 200.0 exceeds 100%'
Dear all,
i am getting the following error for shop with limit order.
User has created A SWL PO with all identical data like vendor, Pur org, product category and only description change for 2 lines. Its showing only one PO which is in 'Error in Process' .
How can a cart with two lines convert into a 2 line PO ?? as per standard SRM it should create 2 different PO.
Noted that Error message in monitors reads 'Sum of %>200.0<exceeds 100%' in RZ20.
Line 1 reset. Sent to for approval. Ran resubmission process - did not work
Error in process. Error message in monitors 'Sum of %>200.0<exceeds 100%'>Hi,
I think that the error is with the backend system which cannot handle 2 limits for one PO...
There is an OSS note...
Kind regards,
Yann -
B2BStarter thread: (ERROR) Max retry exceeded - B2B startup
Hi,
On B2B startup we are getting the following logs.
le.receiver.minimum_age=0;http.receiver.registry_port=5110;
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Email_Inbound_Transport_Server_Node_1 < email > < Emix >]
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) SMTPReceiver.init() started ....
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) IMAPMonitor.setPollingInterval: polling time 1
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) SMTPReceiver.init() completed.
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_JMS_Transport_Server < jms > < Emix >]
2010.05.04 at 09:20:25:714: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2010.05.04 at 09:20:25:714: Thread-15: (DEBUG) [IPT_SmtpRecPollingStatus] IMAPMonitor is up polling at 1 sec interval ...
2010.05.04 at 09:20:25:715: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:25:728: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:26:717: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:27:719: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:28:721: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:29:723: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:30:727: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:31:729: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:32:732: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:33:733: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:34:735: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:737: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:820: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:36:740: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:37:743: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:38:744: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:39:747: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:40:749: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:41:752: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
le.receiver.minimum_age=0;http.receiver.registry_port=5110;
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Email_Inbound_Transport_Server_Node_1 < email > < Emix >]
2010.05.04 at 09:20:25:600: B2BStarter thread: (DEBUG) SMTPReceiver.init() started ....
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) IMAPMonitor.setPollingInterval: polling time 1
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) SMTPReceiver.init() completed.
2010.05.04 at 09:20:25:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_JMS_Transport_Server < jms > < Emix >]
2010.05.04 at 09:20:25:714: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2010.05.04 at 09:20:25:714: Thread-15: (DEBUG) [IPT_SmtpRecPollingStatus] IMAPMonitor is up polling at 1 sec interval ...
2010.05.04 at 09:20:25:715: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:25:728: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:26:717: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:27:719: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:28:721: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:29:723: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:30:727: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:31:729: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:32:732: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:33:733: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:34:735: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:737: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:35:820: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:20:36:740: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:37:743: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:38:744: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:39:747: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:40:749: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:20:41:752: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:26:402: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:27:404: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:35:883: B2BStarter thread: (ERROR) Max retry exceeded, closing everything
java.lang.Exception: Max retry exceeded
at oracle.tip.transport.basic.jms.JMSMonitor.reconnect(JMSMonitor.java:834)
at oracle.tip.transport.basic.JMSReceiver.init(JMSReceiver.java:334)
at oracle.tip.transport.b2b.B2BTransport.init(B2BTransport.java:389)
at oracle.tip.adapter.b2b.transport.TransportInterface.initialize(TransportInterface.java:473)
at oracle.tip.adapter.b2b.engine.Engine.initialize(Engine.java:528)
at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:280)
at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:318)
at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:151)
at java.lang.Thread.run(Thread.java:534)
2010.05.04 at 09:25:36:424: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:37:427: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:43:440: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:44:441: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:45:443: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:45:886: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2010.05.04 at 09:25:46:446: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:46:688: B2BStarter thread: (DEBUG) JMS Connection established.
2010.05.04 at 09:25:47:449: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:47:810: B2BStarter thread: (ERROR) New connection acquired
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) JMSReceiver.init() completed.
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) initialize TransportReceiver: [Emix_Dummy_File_Transport_Server < file > < Emix >]
2010.05.04 at 09:25:47:810: B2BStarter thread: (DEBUG) FileReceiver.init() started ....
2010.05.04 at 09:25:47:822: B2BStarter thread: (DEBUG) FileReceiver.init() completed.
2010.05.04 at 09:25:48:452: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:49:453: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
2010.05.04 at 09:25:50:455: Thread-15: (DEBUG) IMAPMonitor.run(): IMAPMonitor goes to sleep for 1 secs ...
The problem is, it takes quite a while for the JMS connection to get established. It fails as you see on max retries.
However it succeeds eventually.
However the B2B functionality doesnt start till the connection is established.
Any idea why this is happeninig...it takes arnd 5-8 minutes for our B2B to actually start polling/ working.
I did a tnsping to the database and it works correctly.
Plz help its urgent.
Thanks,
RoshHi Rosh,
To which JMS you are connecting (weblogic or something else)? This may happen only when the target JMS server is not reachable / there is JNDI look up issue.
Please provide details. Also refer -
Re: AIP-50077: Cannot Initialize Transport
If you are connecting to Weblogic JMS then make sure to follow below steps -
1. Add the weblogic.jar in the classpath by following the below instructions:
a. copy the weblogic.jar in $ORACLE_HOME/ip/lib/ folder
b. go to the $ORACLE_HOME/opmn/conf/ folder
c. update the opmn.xml (take the backup of opmn.xml)
c.1 add this line <variable id="CLASSPATH" value="$ORACLE_HOME/ip/lib/weblogic.jar" append="true" />
after <variable id="CLASSPATH" value="$ORACLE_HOME/ip/lib/maverick-all.jar" append="true" /> line
d. restart the B2B
2. make sure the below properties are set in IDC configuration
polling interval <polling Interval time>
Destination Provider Properties java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.security.credentials=weblogic;java.naming.security.principal=weblogic;java.naming.provider.url=t3://<IP Address>:<Port>/
isTopic false
Connection Factory Location <Connection Factory Name>
Message Type bytes
Factory Provider Properties java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.security.credentials=weblogic;java.naming.security.principal=weblogic;java.naming.provider.url=t3://<IP Address>:<port>/
Regards,
Anuj -
Max. number of expressions exceeded
I have a simple SQL to select data from a single table with a
list of 1000 elements i.e. SELECT A FROM TABLE_A WHERE B IN (1,
2, 3, ..., 1000). It worked fine. If I added one more i.e.
WHERE B IN (1, 2, 3, ...., 1000, 1001), then I got error 1795 -
Max number of expressions exceeded 254. I thought this error
applies to the number of expressions. What I have was a list of
values in a single expression -> B IN (1, 2, ...).
I think the error message is misleading. If there is a limit of
1000 elements in the IN expression, the error message should say
so unlesss Oracle somehow formats the 1000 elements into 254
expressions behind the scene.
Any comments.
Thanks.
nullWhat versions are you using?
Do you have a License?
thanks
mike -
Ora-0059: max no.of db_files exceeded
hi.
my db is in archivelog mode(24x7).
i tried to add data file to my tablespace
i got the following error
ora-oo59: max no of db_files exceeded.
plz tel me step by step how to change the db_files parameter
in what state
when i have to take backup of control file
then again how i have to open the database.
my current db_files value is 400 .
i need atleast 600.
thanks and regards
sureshDB_FILES is a static parameter, and cannot be change online. Restarting the db is required.<br>
alter system set db_files=600 scope=spfile;
shutdown immediate
startup<br>
<br>
Nicolas. -
Jbo-30003 exception when logged in users exceed 100
hi
when users connected in application exceed 100 or some times 70
following error raised:
Error 500--Internal Server Error
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30003: The application pool (org.myapp.model.services.appModuleLocal) failed to checkout an application module due to the following exception:
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:233)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.adf.model.bc4j.DCJboDataControl.rebuildApplicationModule(DCJboDataControl.java:1543)
at oracle.adf.model.bc4j.DCJboDataControl.beginRequest(DCJboDataControl.java:1404)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:99)
at oracle.adf.model.BindingContext.get(BindingContext.java:457)
at oracle.adf.model.BindingContext.findDataControl(BindingContext.java:308)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.getDataControl(JUCtrlActionBinding.java:489)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isOperationEnabled(JUCtrlActionBinding.java:262)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.isActionEnabled(JUCtrlActionBinding.java:249)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.getEnabled(JUCtrlActionBinding.java:1473)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.internalGet(JUCtrlActionBinding.java:1567)
at oracle.adf.model.binding.DCControlBinding.get(DCControlBinding.java:649)
at com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:79)
at oracle.adfinternal.view.faces.model.FacesPropertyResolver.getValue(FacesPropertyResolver.java:92)
at com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:187)
at com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:171)
at com.sun.faces.el.impl.UnaryOperatorExpression.evaluate(UnaryOperatorExpression.java:187)
at com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
at oracle.adfinternal.view.faces.uinode.ValueBindingBoundValue.getValue(ValueBindingBoundValue.java:30)
at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.getAttributeValueImpl(UIXComponentUINode.java:392)
at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.getAttributeValue(UIXComponentUINode.java:127)
at oracle.adfinternal.view.faces.ui.laf.base.BaseLafUtils.getLocalBooleanAttribute(BaseLafUtils.java:449)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.LinkRenderer.isDisabled(LinkRenderer.java:119)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.LinkRenderer.getStyleClass(LinkRenderer.java:349)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.renderStyleAttrs(XhtmlLafRenderer.java:508)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.renderAttributesExceptID(XhtmlLafRenderer.java:248)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.renderAttributes(XhtmlLafRenderer.java:267)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.LinkRenderer.renderAttributes(LinkRenderer.java:68)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.ButtonRenderer.renderAttributes(ButtonRenderer.java:72)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.ButtonRenderer.prerender(ButtonRenderer.java:158)
at oracle.adfinternal.view.faces.ui.BaseRenderer.render(BaseRenderer.java:79)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.XhtmlLafRenderer.render(XhtmlLafRenderer.java:69)
at oracle.adfinternal.view.faces.ui.laf.base.xhtml.LinkRenderer.render(LinkRenderer.java:40)
at oracle.adfinternal.view.faces.ui.laf.oracle.desktop.ButtonRenderer.renderAltContent(ButtonRenderer.java:211)
at oracle.adfinternal.view.faces.ui.laf.oracle.desktop.ButtonRenderer.render(ButtonRenderer.java:192)
at oracle.adfinternal.view.faces.uinode.UIXComponentUINode.renderInternal(UIXComponentUINode.java:177)
at oracle.adfinternal.view.faces.uinode.UINodeRendererBase.encodeEnd(UINodeRendererBase.java:53)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:246)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelHorizontalRenderer._encodeChild(PanelHorizontalRenderer.java:158)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelHorizontalRenderer._encodeChildren(PanelHorizontalRenderer.java:139)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelHorizontalRenderer.encodeAll(PanelHorizontalRenderer.java:62)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:473)
at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:253)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:465)
at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:253)
at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:234)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.encodeColumnChild(PanelFormRenderer.java:275)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.renderColumn(PanelFormRenderer.java:251)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer._renderColumns(PanelFormRenderer.java:545)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer._encodeChildren(PanelFormRenderer.java:153)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelFormRenderer.encodeAll(PanelFormRenderer.java:69)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:54)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:242)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:265)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:147)
at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:169)
at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
at jsp_servlet._pages.__login_jspx._jspService(__login_jspx.java:286)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.nict.pp10.controller.jsf.NictAuthenticationFilter.doFilter(NictAuthenticationFilter.java:220)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
can any body help me?
is there links for configure application module and it's properties?Hi,
the developer guide has a section about tuning and configuration
http://download-uk.oracle.com/docs/html/B25947_01/toc.htm
Frank
Note that a single OC4J container wont be able to handle any size of user population. So you may need to consider additional OC4J instances -
Sum of percentages 200.0 exceeds 100 % in BAPI_ENTRYSHEET_CREATE FM
Hi ,
i am using this BAPI ( BAPI_ENTRYSHEET_CREATE) in my code
and for a partcicular scenario return table is filled with the error message
'sum of percentages > 200.0 < Exceeds 100%'
How to remove this error any idea.
Regards,
Surendar Reddy.hi..
Your error message clearly says that, it got the SUM Percentage as 200. Hope you know that, we can have percentage upto 100 only. So in your scenario, check whether retrieved value is appropriate or not.
thanks.
Padma -
Regarding suggestions for Subject -- Message subject cannot exceed 100 characters.
Hi,
feedback or suggestions --
when characters exceeds more than 100 in subject area then error shows that "Message subject cannot exceed 100 characters."
my suggestions would be if there is any word count at bottom then that will be helpul to keep the subject within 100 characters. it should reduce from 100 as user type the characters in sybject.
please update which will be helpful.
bye,
sivaWhen you replied on a post, the message subject will have "Re: " added to the message subject, causing it to exceed 00 characters. You will have to edit the message subject by removing some characters so that it fits within 00 characters.
Maybe you are looking for
-
File Not Found bug with long audio file names?
Hello - Crazy problem. I'll probably post way too much information, but I want to make sure I cover everything. Help! We run Logic Studio/Logic 8 on multiple 10.4.10/11 computers - G5 Power PC, new intel iMac, intel mini, G4 laptops. We are working o
-
Problem with Datagrid itemrenderer with a Datagrid
Hi all, I have this kind of a structure. I try to use a datagrid item renderer in a data grid column. However when I try to move rows inside the same datagrid I experience a problem. When my datagrid loads first it seems correct, but when I drag and
-
Hi, I've looked around online and not been able to find any answers. So this might not be possible, but thought it worth checking on here. I often print files as PDFs so I'd like to be able to do this using keyboard shortcuts. Pressing ⌘P brings up t
-
How to User Purge Recyble bin as System
Hi all, I want to purge scott's recycle bin as user "SYSTEM". Because I do not know the user's password. How do I achieve it? SQL> purge scott.recycle bin; purge scott.recycle bin ERROR at line 1: ORA-38302: invalid PURGE option Thanks a lot, Kinz
-
Trying to set up as a router - Changeing to 192.168.0.1
I had a linksys router connectd to my Verizon Fios interface - A wireless router - (that can pick up anything ) - but it died. Got a airport extreme Tried to configure it the same way as a Router handing out ip addresses starting with 192.168.0.1 Thu