Error: ME is in recovery state (also does not come back from sleep)

Hi,
my name is Ifor and I bought a Lenovo X220 (4290-44G) exactly 2 years ago.
The following happened:
-I noticed an error while booting. The screen said: ME is in recovery state. After that I noticed my computer won't wake up from sleep after I closed the lid. So I installed a fresh windows 7 ultimate install. All the drivers have been downloaded from Windows Update or the Lenovo site.
The error still is not fixed, so I updated my BIOS with the newest .iso file from the Lenovo support site. The error still persists!
Also, my processor gets really warm and my screen sometimes flicker. I've had no problems or what-so-ever before.
All I found was this link and I updated my bios already: http://en.community.dell.com/support-forums/laptop/f/3518/t/19456189.aspx
I would be really grateful if someone could help me.
Kind regards,
Ifor

Same problem with my T420. The Intel(R) Active Management Technology - SOL (COM4) doesn't work either.
Fresh windows 7 pro installed, latest BIOS from Lenovo, flashed CMOS, installed drivers with Lenovo system update software...

Similar Messages

System does not come back from suspend

Hi
when I suspend my laptop via ``suspend`` and press any button to restart, my
system just shows a black screen and is not responding to any input. The only
hint to determine that it is out of suspend mode is, that the disk is starting
and that the power leds are shining.
Please let me know if you need more info. I have no clue where to look.
Regards
Manuel

Hi Manuel,
I had a similar problem but only in KDE, in my case the keyboard was working because I could kill X (ctrl+alt+backspace) and also change to a terminal (ctrl+alt+F1). If it is the same for you then check my post.

TS3694 Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

Hi, My iphone 5 loses the 3G connections everytime i go into tunnel and also to holland park and it does not come back untill i restart the phone? i dont know why is it happening?

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

E-mail to the recovery user name does not come

e-mail to the recovery user name does not come
what i do?
I'm sorry for the mistakes i am polish

The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
*If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

Just upgraded to latest iOS and my iPad does not come back up. It displays a line to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else.

Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

Host Command does not come back

Hi,
I have treid to export schema by pressing a button, (form designed in Form10gR2 and excute via Application Server R2. )
For this I have applied one by one these syntaxes
1) host ( 'cmd /C start "" "'|| exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
2) host ( 'cmd /C exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
3) client_host('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
4) WEBUTIL_HOST.NONBLOCKING('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
When my client/ user executes the command, session goes hang and application screen does not come back. If I execute the exp command directly from the Application Server Command Prompt then exp works.
Please help me, what is the syntax to get the dump wihtout hanging the session.
Database 11g Linux
Application Server 10R2 Window2003.
Developer 10gR2.
Client Windows , Explorer, FireFox etc.
Regards.
Priya.

Hi Priya,
It is always a better practice to call a batch file using the host command instead of hardcoding the command inside form. Which would help you to modify the batch file for any changes, without re-compiling the forms.
In this case, create a batch script, which would set the ORACLE_HOME etc (to make sure the exp command is recognized, you need to add the DB ORACLE_HOME/bin to the PATH), and then call the command to export. You can also parameterize the batch script and pass the parameters from form, separated by space.
-Arun

I am trying to change my mousepad battery. keyboard does not come back up

I am trying to change my mouse pad battery. have replaced battery. keyboard does not come back on.

If you continue and you lose everything, you will be able to download most of the content again for free as long as you use the same Apple ID. You can read this about downloading past purchases.
http://support.apple.com/kb/HT2519
But before you continue and lose everything, try this.
Eject your iPad, quit iTunes and restart your computer. Then launch iTunes and go to Edit>Preferences>Devices. See if you have mutliple iPad backups showing in there. If you have multiple backups, delete all but one of them. Also check the box at the bottom that turns off auto sync .... Prevent iPods ......Click OK and Then quit iTunes.
Connect the iPad again and launch iTunes. Right click on your iPad name on the left side of iTunes and select backup. See if the iTunes will create a backup. If it does, after it finishes, click on the Summary Pane on the right and click on check for update. Try to update again.
If it all goes OK, after you update the iOS you can back to Edit>Preferences>Devices and turn on atuo sync again - assuming that is how you want to sync.

Vertex tax information does not come back to SAP

Strange problem that we are having.
We have a situation where the taxes calculated back from Vertex somehow does not come back to the billing document upon billing document creation. However, this problem seems to be rare and intermittent, but happens regardless.
The problem doesn't seem to be configuration because billing documents for the same customer and material are successfully calculated for tax. Also, if the incorrect billing document is re-billed, the taxes come in correctly. I already checked VK13 to make sure that all the condition types are coming in correctly.
Also, Vertex seems to have been able to receive the parameters that is used for calculating the tax as the Vertex log shows that the tax information was calculated correctly, but for some reason, this tax does not make it back to the billing doc.
Has anybody had this problem with Vertex?
Thanks

Paul,
I read your problem and most likely there is addtional configuration that may need to change depending on the details of your SAP and Vertex deployment. You can reach me at Vertex to discuss this issue. Some addtional details about which version of SAP, which product and version from Vertex, how it is deployed, etc will be some of the items we can discuss. As an example, this could be a memory issue and you need to enable more listeners....sometimes this happens when the RFC gateway can't keep with the responses from the external system. Kevin Toner

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

My MBA does not start up from sleep

My MBA 13" mid 2013 (Mavericks) does not start up from sleep at times, or at least is very slow (1-2minutes)
As far as i remeber the only thing installed fairly resent is Virual Box.
It does connect to my iPhone when its connected to via USB but the sceen stays black.
Anybody else with this problem?

Hi bryan808-
It could be that the failure and installation of the update are simply a coincidence.
Back up. Then try removing all PCI cards and disconnect all external devices except your monitor, keyboard, and mouse. If that configuration will wake from sleep then start adding devices and/or cards one at a time until you find the culprit that keeps your machine from waking.
If you are really running a G4 you will have better luck posting in the appropriate section of that forum: Ctegory: Power Mac G4
Luck-
-DaddyPaycheck

HT4367 Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.

Error: ME is in recovery state (also does not come back from sleep)

Similar Messages

Maybe you are looking for