Error: Media In Device Not Functional

I keep getting the error message, but only occasionally, when I connect my iPod Classic to my car. I have a factory cable so that I can access the content through the navigation but several times/week the iPod stops (sometimes mid song) and tells me "Media In Device Not Functional". The dealer has done a couple of "patches" that they said would fix it but it hasn't. I'm beginning to think it's the iPod itself since we have an iPod dock for our home stereo and it too was have issues with the iPod. I'm thinking of doing a Restore.

Relieved to hear I'm not the only one with this problem with the 80gb classic, I Opened mine on xmas day and it worked ok for a few days then I got the problem as described...
the ipod played music and videos fine but windows wouldnt detect it so I couldn't sync it ... tried a factory reset (hold action and menu button for 10 seconds) this didn't make any difference, I then managed to get it into diagnostic mode by doing a factory reset, then holding the action button and the left arrow before the apple logo disappears ... after going through all the keypad diagnostics which passed windows again recognised the device, I then opened Itunes which recognised that the ipod had a serious error and offered to restore it back to its factory settings, which I did, I then also updated it to the latest software
again it worked fine for a few days and then I got the same error in windows xp again ... thinking the drivers might be corrupt on my PC I tried it on a different PC but with no luck, again got the same error
My Ipod is now back at Comet ... but because of their stupid policy I cannot get a replacement as it was bought more than 14 days before I took it back, even though it wasn't unboxed till christmas day!! so it looks like I'll be without it for a while,
I will keep posted on the outcome but any other feedback would be appreciated from anyone who has had the same problem

Similar Messages

I can´t install my HP laserjet 1018 in windows 7 (64x), a error message appear "device not recognize

I can´t install my HP laserjet 1018 in windows 7 (64x), a error message appear "device not recognize

Try this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

My Media Keys are not functioning with iTunes 10.6.1...

My Media Keys are not functioning with iTunes 10.6.1... As i said
Keyboard: Microsoft Digital Media Keyboard 3000
I've actually had this issue since like what, 10.4? I've tried that dll fix thing and that does nothing. Any help out there so I can play my music without having to leave the micro player popped up all the time?

And included on the retail sales box.
http://www.apple.com/iphone/specs.html
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)

Iphone 4S will not charge, error that USB device not working, found any suggestions?

iphone 4S will not charge, error that USB device not working, found any suggestions?

Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen

USB2 devices not functioning to USB2 speeds on K7N2 Delta-L

Dear all,
Before i get the "Use search" button, i have and done it practically all day trying to find a solution.
My system: MSI K7N2 Delta-L, running on Windows XP service pack 2
4 USB ports at back panel, 2 USB ports on the D-Bracket (where there is a High Speed sticker on it)
All USB ports front or back "work" but not any allow me to use a USB2 enabled device to make it function at its designated speed.
An example is: Transfer of a 20MB file takes 25seconds... ludicrous for a newly bought Kingston 1GB USB2 complaint flash drive.
I have read the stickys, i am certain the USBOC is not connected by any wiring, the manual in K7N2 already stated that, my BIOS is at the latest version, my system is functioning correctly, no IRA conflicts by checking through device manager.
http://www.apxc57.dsl.pipex.com/Connections.JPG
This shows that the USB2 Kingston device does not get routed to the Enhanced host controller, i do not know why, please let me know if you know!
http://www.apxc57.dsl.pipex.com/Front%20USB%20unplugged.JPG
A better view...
Standard Enhanced PCI to USB host controller - I'm not as certain to understand what this means. Does it mean that my board ONLY supports the Enhanced USB IF i purchase a PCI card that has USB2 ports on it??? And it means that ALL 6 of my ports onboard (including the D-bracket) are all Open HCD..........
I honestly have searched everywhere and there is NO definitive solution to this problem i'm having yet, MUCH MUCH appreciated if anyone can give a guiding light.....please !!!
THANKS VERY MUCH IN ADVANCE...

Interesting update... here:
I've been thinking about what everyone said here, so i was questioning whether this Kingston USB2 device is really USB2 standards.
Please take a look at here: http://scan.co.uk/Products/ProductInfo.asp?WebProductID=245123
That is the actual product and where i got it from, please just take a quick nip at the specifications.."Super Hi-Speed 24MB/sec"
As you know, i have the MSI D-Bracket 2, the exact image is found here: http://www.modsynergy.com/Modsynergy%20files/MSI-5.jpg
You can see from that image, that it clearly displays a "High speed, certified USB" from the red/blue logo.
A description that distinguishes between "High speed, certified USB" from "Certified USB" can be found here: http://www.everythingusb.com/usb2/faq.htm
Near to the lower end of the page.
Now... interestingly i now notice the back cover of the USB2 Kingston drive in which it was concealed in, take a look here:
http://www.apxc57.dsl.pipex.com/KINGSTON.jpg
Cast your attention to the Red Circle i have done. It doesn't say High speed certified, it just says Certified USB.
SO, let me quote from "What are USB Hi-Speed and USB Basic Speed logos? These logos are part of USB Promoter Group?s branding program that ensures the quality of USB products. The USB 2.0 certified products would display a blue, white and red logo, bearing the words ?Certified? and ?Hi-Speed.? The classic USB 1.1 certified products would display a black and white logo with the words ?USB? and Certified.?"
If my USB2 kingston device is really USB2 and support the 24Mb/sec transfer rate, the box should in fact have a high speed logo not a black/white one correct???
Thanks for reading, i'll get in touch with the supplier i think... probaly RMA come saturday.

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Output device not defined error while saving the quotation

Hi all,
We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'. If i remove all the output types while changing the quotation in VA22 from header, it is processing.
I checked with all other output types combination. The error is trigerred only when we have ZJT output type along with ZQTO.
We are not able to recognise the error. Please help out to solve this issue. Its very urgent.
Thanks.

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Libretto - USB Device Not Recognised error message

Hi there
I have a workaround for this problem which ocassionally happens. It is just to reconnect the USB hub(as recommended by Windows). I was just wondering if someone knows why this happens and how to fix it. The error is :--
"USB device not recognised. One of the USB devices attached to this computer has malfunctioned, and windows does not recognise it.
USB Roob Hub (2 ports) - Unused Port, Unknown Device.
Recommendation: try reconnecting the device. If Windows still does not recognise it, replace the device. "
I look forward to hearing back from you.
Kind regards
Julia.

Hello Julia
It is always advantageous to mention which model you have exactly. Obviously the external device is not recognized correctly. Check if there is some driver that must be installed before you can use it properly.

Most Recent Devices Not Currently Connected:

HI,
I'm getting error Most Recent Devices Not Currently Connected: in iTunes diagnostics for Device Connectivity Tests.
Device: iPhone 4
Laptop OS: Windows XP
iTunes: 10.5.3.3
I'm not able to restore iphone and it throws errors 1602 and 21 while restoring. I have completely removed and reinstalled iTunes before trying to restore.
My firewall/antivirus does not block any iphone/itunes service as I have used same PC before with the same iPhone.
Log is as follows:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
TOSHIBA Portable PC
iTunes 10.5.3.3
QuickTime not available
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACEC07B3B468
Current user is an administrator.
The current local date and time is 2012-01-30 20:41:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16002)
Video Display Information
Mobile Intel(R) 945GM/GU Express Chipset Family
Mobile Intel(R) 945GM/GU Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.5.3.3 is currently running.
iTunesHelper 10.5.3.3 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
VIA OHCI Compliant IEEE 1394 Host Controller
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0.1
Serial Number: xxxxxxxx (edit: removed for security)
Please help.
Regards,
Yogesh

Hi susanfromluling,
Welcome to the Apple Support Community!
It sounds like your iPod is not showing in iTunes when you connect it and that is what is not allowing you to sync. Please review the attached article to help you troubleshoot this connection.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Cheers,
Joe

USB Device Not Recognized - Palm 700p Verizon

Hi,
Yesterday morning I could sync, yesterday afternoon I got the error message "USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it." Sometimes when I click on the associated error pop-up message, it shows the location of my "unrecognized device" but sometimes nothing shows up.
I've seen a couple of posts on the web generally about this, but not about the 700p. I've tried rebooting the computer, tried syncing to a different computer, tried rebooting the phone, and blown out the contacts. I don't want to buy a new USB cable if I can help it because I'm thinking about getting a Pre anyways (although the fact that I can't seem to use Palm's chat function through either Internet Explorer or Firefox is starting to dissuade me).
Anyways, is there anything else I can try to resolve the issue with my 700p or should I just give up?
Thanks,
Margaret

if you already tried your phone and USB cable to a different USB port and computer then the problem could be in either the phone or the cable. if you don't want to buy a new cable because of your plan. maybe you can visit a store near you where you can borrow a cable or PC. at least you trying to make sure which is defective. in cases like this, the cause is the USB cable.

USB device not recognized ... any help ?

Hey guys,
So i went to plug my iPhone 3G into my PC running Windows Vista and it comes up with the error message,
"USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Last time this happened I uninstalled the USB Root Hubs on my computer and when they reinstalled my iPhone connected, but it has happened again and this method no longer works.
I've tried restoring my phone, turning it on and off, i tried stopping my computer from turning off my USB ports but to no avail...its getting very frustrating because i can't sync my phone
ANY suggestions would be great PLEASEEEE!
Message was edited by: chris__robin

Try a different port and a different USB cable.

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

Boot device not found - Please install an operating system on your hard disk

Trying to boot up this morning gave this error message:
"Boot device not found
Please install an operating system on your hard disk
Hard Disk <3F0>
F2 System Diagnostics"
Pressing F2 brings up to the "HP PC Hardware Diagnostics UEFI" page, where its shown:
"Version 1.6.0.0 - BIOS
Fore more info please visit www. ... ...
Memory Test
Hard Drive Check
Language
Exit"
Tryied the HD check but it says:
"SMART Check : Not installed
Short DST : Not installed
More details:
No bios upgrade was made, never, only a big updating of Windows yesterday.
Could someone kindely help me out please?
Thanks, Perry G.

Hi,
The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
To order parts click the below link
https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
To order Recovery disk click below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Boot Device Not Found. Please install an operating system on your hard drive. Hard Disk - (3F0)

Model HP-G72-257CL. Purchased new Operating System & Hard Drive from HP. Error message Boot Device Not Found popped up after attempting to installing hard driveon laptop

RonDNor wrote:
Model HP-G72-257CL. Purchased new Operating System & Hard Drive from HP. Error message Boot Device Not Found popped up after attempting to installing hard driveon laptop
Hi,
Try this first:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&lc=en&dlc=en&cc=us&product=4308966#N16...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSD

Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error: Media In Device Not Functional

Similar Messages

Maybe you are looking for