Error memory magenta print cartridge CP1215

Hello. I ask for help.
On the printer, hp Laserjet CP1215 there is an error: "Error memory magenta print cartridge"
Cartridge a new, out of the packaging, as well as all the rest.
What advise?
p.s.: It is possible will help initializing NVRAM. How to do this?
Thank's.

Прийдется избавиться от принтера.... печально

Similar Messages

  • M1319f Laserjet MFP..no printer cartridge error when cartridge in machine.

    My Laserjet M1319f MFP for some reason today decided to display an error stating n printer cartridge.....funny thing is that there is one in the machine and it was never touched. I turned the machine on and of with no change error message still there. Took the cartridge out of the machine and put it back in and no change in the error message. I reset to defaults and again no change in status. Can anyone tell me whats going on? If there is no toner...which i highly doubt..wouldnt it say low toner first? Any help is appreciated.

    I think that the printer is not making proper electrical contact with the toner cartridge.  Check the electrical contacts on the printer cartridge (there are 3 on the left hand side).  If they are damaged or missing, that could cause the problem.  There should be 3 corresponding contacts in the printer as well that you should check.

  • PSC 1315 "The print cartridge carriage is stalled."

    I have been using this printer for a couple years. Last week everything was fine but now when I try to print, I get this error message: "The print cartridge carriage is stalled."  I have not changed the ink cartridge, I have not moved the printer, nothing on my computer changed, I use XP and have since I bought the computer. But all of a sudden I now get this message. It wont let me print, if I try to reset the printer, it goes back to this message. I then bought all new ink cartridges (HP brand) and get the same message.
    Any suggestions?

    Try this support document;
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577214&cc=uk&lc=en&dlc=en&product=374568
    Greetings,
    Bart

  • How to print without yellow toner cartridge in a laser printer hp CP1215. I broke yellow cartridge.

    I accidentally broke the yellow cartridge of my brand new Laser Printer hp CP1215. I want to just use only other colors like magenta and cyan etc. But the printer is not printing at all because there is no yellow cartridge.
    Is there a way out to print using other colors like magenta or cyan? I want to do only text typing (highlighting) using these colors. I am using Windows 7 Ultimate and hp Color Laser Printer CP1215.
    I want to highlight some text using magenta or cyan to show important points. I want to use black, magenta and cyan colors for text. Changing settings to print only black and white cannot do this.
    This question was solved.
    View Solution.

    Hi RaoPN,
    Sorry you feel this way. Far as i am aware most color laserjet printer producted in the market today are designed to work with all the cartridges installed.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Photosmart C6180 printer. Says the magenta ink cartridge is empty when it is new.

    I own a HP Photosmart C6180 printer.  It sat for several months so I replaced all of the ink cartridges.  It will not print because it says the magenta ink cartridge is empty.  It is brand new and i can see the ink inside of it.  I am not sure what to do.  I don't want to take it to get serviced as I live several hours from any computer or printer repair shop.  Please help!

    Hi pbeck39
    What are the ink levels like on a self test page - are they good? Are you using Win XP x64 by any chance?
    Thanks
    Ciara
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Check print cartridge error

    I installed a new black cartridge in my HP PSC 1410 All-in-One.  It printed a sheet to align the cartridges, but it won't scan, and I can't find HP Utilities or Scan or Toolbox on my MAC.  
    I tried taking one cartridge out, then the other.  That did not help.  I also tried turning everything off, no luck.  The only thing that happened was the printer printed another aligning sheet.
    Any suggestions??
    Thanks

    Hello apgrams,
    Welcome to the HP Forums!
    I understand you're receiving a few problems with the PSC 1410. I will do my best to assist you! What is your operating system on your Mac computer? Click here to find out.
    Are you still receiving "Check Print Cartridges" error?
    Is this alignment sheet missing colors? If not, then please follow these steps:
    1) Remove all ink cartridges from the printer, then close the door
    2) Remove the power cord from the printer (Do not press the power button)
    3) Wait 60 seconds or more, then plug the power cord back in
    4) Wait for the printer to turn on completely, then install the ink cartridges
    5) Try to print another alignment page
    I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • Pc2510 Check Right Printer Cartridge/Not Supported/Hourglass Errors

    Hello!
    If anyone has had success resolving these errors, please let me know, even if it has meant replacing your print cartridge. Thanks!
    Error Description:
    Original problem: The printer cartridge error message "Check Right Printer Cartridge" is blocking any use of the psc 2510, including scan and nonprinting noncopying functions.
    Current problem:Hourglass freeze accompanied by printer sounds (alignment?) which stop, but screen message never advances past hourglass..
    Summary of Troubleshooting:
    I received an error saying: check cartridge in right stall. Tried cleaning contacts on printer cartridge and printer contacts with distilled water. In process of employing other tactics in online tutorial, I tried unplugging power while the printer was open. Ever since, it just runs through hourglass and printer sound, but does not advance past this screen icon.
    Customer Technical Support:
    Suggested a semi-reset of # and 6 keys plus unplug and replug or try new print cartridge. When asked if there was anything I could try before purchase of a new cartridge, suggested I unplug and hold power buton for 10 seconds, then replug. (Full description of these at bottom). Upon further research, representative suggested an upgrade.
    Hourglass fix attempts employed from forums:
    Tried to plug into wall outlet vs. power strip. (Fully plugged in loose connection to brick when noticed was not in all the way.) Reset modem. No results.
    What I Haven't Tried:
    Have not tried a new printer cartridge until have exhausted all non-monetary fixes.
    Full Description of Troubleshooting:
    The first error: check cartridge in right stall occurred suddenly after problem-free use.
    The contacts on the black cartridge were cleaned but the error persisted.
    After disconnecting use for a time, I reconnected last night to troubleshoot printer cartridge error on current Mac machine. Installation was completed successfully.
    The same error occurred once setup was complete.
    I performed the following:
    1) cleaned contacts on black cartridge using distilled water.
    2) unplugged power cord (per post in forum)
    3) unplugged power cord and tried pressing cancel/left arrow (per same post in forum)
    4) cleaned contacts behind black cartridge on printer
    5) removed black cartridge, closed machine and got insert black cartridge error (attempt to determine which cartridge was the problem)
    6) Even though this message appeared to indicate the black cartridge was the problem (per web support article) I cleaned the contacts on and behind the color cartridge as well.
    In the course of all of this trouble shooting I got a second error: "Print cartridge in right stall not supported."
    I noticed that the fit is looser than in the color cartridge. I inspected the spring and cartridge area for damage and found none. Cleaned dirt however below contacts on machine.
    Also, at one point during the trouble shooting I was able to get to the scan menu but then it quickly reverted to the first error message.
    7) Per general support article online, I tried unplugging the power while the lid was opened (as indicated during cleaning of cartridges.) This information was not in the manual that came with my machine. I was hoping this might reset things.
    Then I got the third error: a period of sounds of the printer (alignment?) followed by hour glass on screen.
    The 2510 appears to be frozen. No buttons like cancel or menu or on button caused any response.
    I unplugged it again (this time with the lid closed) and got the same series. A period of sounds like alignment and then a halt of sounds with the hourglass still on the screen.
    Customer Service Rep sent the following:
    Email 1:
    1.      While the printer is powered on, without turning it off, unplug the power cable from it.
    2.      Press and hold the # and 6 keys together and while you are holding them, plug the power cord into the printer
    3.      Hold the keys for about 30 seconds, while the printer tries to power on, and release the buttons.
    4.      If the printer turns off, use the on button to power on the printer, and follow the instructions on the display.
    If it still comes up with the same error, I request you to try with a new black cartridge and get back to us with the results.
    Email 2:
    1.      While the printer is powered on, without turning off the printer, unplug the power cable from it
    2.      Press and hold the on button for about 10 seconds and release it.
    3.      After about 1 minute, plug the power cord back and try powering on the unit.
    The reason I suggested to try with a new cartridge is because whenever the printer powers on, it does a self test to make sure all the hardware components are working fine, which includes the cartridges. So if there is any error with the cartridge, then the printer might freeze if it is unable to determine the cause of the issue or the point of failure.
    Email 3:
    I did some research and the issue seems more likely with the hardware of the printer.[...]
    If the issue persists, get back to us with the information below for upgrade options for your printer. 
    Forums:
    I then tried unplugging from power strip into wall outlet and resetting modem without result. Noticed blue light for wireless connection is no longer on.
    Message Edited by allinfun2510 on 05-04-2009 05:46 PM
    This question was solved.
    View Solution.

    I had the same issue with my 7610 (error=print cartridge not installed correctly), and tried some of the listed suggestions - opened up another brand new cartridge - same issue; put the old one back in - same issue.  So I knew it wasn't a defective cartridge, but rather something wrong with the spring that supports the cartridge, because it didn't seem to 'click' in correctly anymore.  Compared the spring on the black (right) side, to the color (left) side, and saw the spring hanging down.  Put it back in place a couple times - still without success - until I looked closer and saw that part of the plastic that holds the spring in place must have just broken off.  Tried t a little piece of tape to hold the spring in place, and finally, the cartridge worked - for now.  Hope this helps someone else if they're having the same issue.  Good luck!

  • Officejet 7310 print cartridge door open error message

    I have just tried replacing my black ink cartridge with a new one and it started giving a cartridge door is open error message. I have reinserted it several times and used old cartridges that were ok before but the same message remains. i have checked the colour door and the black door and the projecting wire is slightly loose as it looks like a piece of plastic that holds it in place has gone. I have tried using blue tack but it is now giving a message saying 'Error - remove the right cartridge and check it'. I can try supergluing the wire but I dont know if its this or not, or if the cartridge door sensor is playing up, but I don't know where this is? Can anyone help otherwise it looks like I will have to get a new printer?

    The problem is the spring tension used to hold the cover open is stronger than the poorly designed weak hinges.
    The way I solved it was to break both the hinges, (pretty easy to do just open and close the cover a few times),  lift the cover up being carefull not to break the ribbon cable (wires) from the cover to the base. Then I pryed out the lower spring plates, these are located in the hinge assembly of the printer and removed the black plastic plunger and  the large springs below it from both hinges. The cover wil now stay closed and allow you to print. You just have to be careful when changing the print cartridges as the cover can open too far now and possibly break the wires going to the top cover.
    Happy Printing

  • I keep getting a "Print Cartridge Error" even after replacing both ink carts in my psc2410

    I keep getting a "Print Cartridge Error" on my psc 2410. I replaced both ink cartiridges and cannot clear the error. Any ideas?

    After playing with it, I now get only a 'check color cartirdge' message. I've pulled it out, checked the contacts and put it back in several times to no avail...

  • Print cartridge error

    Help. I have a HP Photosmart C4280 printer. I replaced the black cartridge as usual, but I keep getting an error msg "Print Cartridge(s) incorrectly installed." This has never happened b/4 & I can't figure my way out of it. I've put the cartridge in as outlined in the instructions..nothing has worked!

    Hi,
    Please go to this link & hopefully it will solve your issue with the print cartrideg error message:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01530839&tmp_task=solveCategory&lc=en&dlc=en&cc...
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
    (I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

  • Print Cartridge Error (Electrical Failed Pen)

    I'm using an HP Deskjet F4400 series, and I just replaced my empty black cartridge.  Prior to that, the color cartridge was around 75% full.  After installing the black cartridge, I have an error with the color cartridge, Print Cartridge Error (Electrical Failed Pen).  I found a thread that suggested cleaning the contacts, but I still have the same error, and cannot use the printer.  Please help!
    This question was solved.
    View Solution.

    Hi, you could try doing a reset (check out this link ), then try to reseat the cartridges and perform an alignment (details here ). Does this solve the problem?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • "Printer cartridges not installed correctly" error message

    HP Tech Support and HP Envy Users, Still getting the "Printer cartridges not installed correctly" error message for no good reason and it's July 2015! HP should have fixed this problem a long time ago based on the date of the posts from users. And/or corrected the misleading error message, as the users did install them correctly. I didn't get an installation error message when I installed my cartridges and I have been able to print successfully on this current set of cartridges. My error message appeared out of the blue. I've done all the troubleshooting steps except replace BOTH cartridges. I will do that. If the error message goes away once I've replaced one or both cartridges, HP should have long provided an update that says, "replace ink cartridges" and not the misleading one of not being installed correctly. If that doesn't clear up the problem, I will call HP as it's still under warranty. Hope I didn't get one of the "lemons" that require servicing.

    Hello @jimboware and welcome to the HP Forums!
    As far as I'm aware, there is no Windows 6, did you perhaps mean Windows 7? This What's My OS link will help if you'd like
    When you're starting the install, do you plug in the USB cable before the software asks for it?
    Let me know that information and we'll go from there!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Error message: Printer cartridge problem

    I'm copying only at the moment.  A small stack of papers.
    Suddenly the printer seemed like it was taking too long on a page, and it just kept staying in the same position but nothing was happening.
    Finally I tried to shut it down but it wouldn't shut down.  It said, shutting down, but it wasn't.
    So I unplugged it and waited a bit, then plugged it back in.
    Then it appeared to be OK but when it started the copying process again, it stopped and gave that error message.
    Is it something as simple as it's out of ink?  But I don't think it should be.  It wasn't showing that it was low.
    Any suggestions, anyone?

    Hi melegay,
    Welcome to the HP Support Forums! I understand you were trying to copy on your HP Printer and the paper was not feeding, you did a hard reset now your printer's front panel is saying 'Printer Cartridge Problem'. Can you please let me know the Exact model of HP Printer you are using?
    Please start here: 'Ink Cartridge Problem' Message Displays on the Product Control Panel. Follow these steps in the order presented to resolve the issue. When one of the steps resolves the issue, there is no need to continue troubleshooting.
    If you are still getting the error message let me know and leave me with the requested information.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Photosmart C4580 All-In-One - Error Message: Print Cartridge(s) missing or not detected

    Hi
    I have recently encountered a problem with my printer.
    I went to print a document and the following error message was displayed on the printer "Print Cartridge(s) missing or not detected", and the document would not print.
    I am unsure as to why this message was displayed as I had not changed anything to do with the printer.
    The cartridges that were in the printer had been in the printer since October so I thought that it could be due to the cartridges needing to be replaced, therefore, I changed the black ink cartridge. Once the cartridge had been replaced the error message disappeared and the document printed.
    However, I went to print another document shortly after and the error message reappeared and the document would not print.
    Due to the fact that changing the black cartridge cleared the error message, I replaced the colour cartridge, however, this did not cure the error message this time.
    I have followed all of the advice on the HP support pages about cleaning the contacts etc, however, it has not worked. I have also contacted the support team by Email, but have had no reply.
    Does anyone know how to cure the problem, or if in fact it can be cured. I am a university student and desperately need the use of my printer, so any help would be appreciated.

    Hi
    Yes it did get resolved in the end.
    It seems that the fault came from using remanufactured or re-filled cartridges.
    I had to replace both of the cartridges so that they were genuine HP cartridges.
    Originally I only replaced the one that was causing the problem, but in the end I had to replace both of them. This then resolved the problem immediately.
    I hope this helps.
    If not, I would advise contacting the HP support team as when they finally replied to my email they were very helpful and quick to reply to queries and offer advice and suggestions.

  • Printer Error: Remove and check cartridge on right.

    Printer Error:  Remove and check cartridge on right.      I have a HP printer Officejet 7310 All- in-One.  I have tried taking the cartridges out, shutting off the printer and unplugging the printer but nothing helps.  The cartridges are correct ones; the problem started after I was using these cartridges for a while.
    Please Help,  Mitzi

    Check out this post in this forum and see if this helps.

Maybe you are looking for