Error mesage related to storage type

Hi
Iam PP guy and getting following message while making container full in Kanban board PK13n
Storage type  xxx not suitable as an interface (SU management is active)

I think you are using storage unit active storage type for this interface.Please use non storage unit active storage type.You can check storage types in define storage types which one is non storage unit active one.

Similar Messages

  • How to delete the material records related to storage type

    Dear SAP guru's,
    I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
    Inorder to accomplish an above requirement we tried the below cases
    Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
    Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
    I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
    Please guide me with the other options.Thanks.
    Regards,
    John.

    Hi John,
    Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
    If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
    Reward if it is helpful.

  • I have uninstalled and reinstalled the new iTunes but it still will not work.  I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

    I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
    I have tried moving the dll filesincluding the QTMovie dll file to now avail.  Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast.  Can anyone please help???

    Dear avid iTunes users - I have cracked it!!!
    The response from Apple/iTunes was extremely poor and did not solve the problem.
    I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
    So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
    So ... I simply deleted the Apple folder found in C:\program files\common files\.
    I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
    I reinstalled the current version of iTunes (for the 16th time!)
    Hey presto!!!
    IT WORKED :-O Woooohooo!!!
    So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
    YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
    Nuff said.

  • "control data for storage type is missing"

    Hi Guys
    I am trying to create a goods receipt for an inbound delivery.
    I created the inbound delivery VL31N - sucessfully
    But when trying to create a putaway LT0F - error
    control data for storage type is missing. msg no. L3006
    Do i maiantain this control data for storage type in the Material master?
    is there anything Im doing wrong?
    Can someone help please.
    Thanks in advance for the help.
    Ahmad Yahya

    Hi,
    Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
    Regards,
    Prabu

  • Transfer Order : Data for storage type search is not defined (A   )

    Dear Experts ,
    While trying to use the Transfer Order and trying to determine the storage type this error appears :
    Data for storage type search is not defined (A   )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    How ever , I have already configured the search and here is the Storage Type search's data in OMLY
    1. Warehouse number : W10
    2. Operation : A "Stock Removal"
    3. Indicator :   E
    4. Stock Category : Blank
    5. Special Stock Category : Blank
    6. Storage Location Ref :10
    7. Storage Type : 10E
    Please Advice
    Edited by: Sap Sap on Feb 24, 2011 10:54 AM

    Hello,
    The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
    You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
    SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
    In this go to determine search sequence and then
    for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
    I hope this helps.
    BR,
    Tushar

  • Storage type search

    Hi Experts,
    I am trying to create TO when I get the error message
    "Data for storage type search is not defined (E 123 S)".
    I may have missed something. Please help.
    Thanks,
    Mylene

    Dear Mylene
    Check this thread where the same issue was discussed
    [Data for storage type search is not defined |Data for storage type search is not defined (A   )]
    thanks
    G. Lakshmipathi

  • Error - No destination storage bin to be found in storage type

    Hi all,
    this is my flow -
    Create STO PO - ME21n
    create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
    create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
    confirm TO- L_TO_CONFIRM
    Using BDC i am doing PGI for VL02n
    create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
    confirm TO- L_TO_CONFIRM
    Create GR - 'BAPI_GOODSMVT_CREATE'
    Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
    No destination storage bin to be found in storage type 104
    I have added 2 lines in the FM at exception part -
    error_message = 16
    OTHERS = 32.
    So my return code for the FM -  L_TO_CREATE_DN (_FOR i/b delivery)_is 16
    message class : L3
    message number : 009
    message type : E
    No destination storage bin to be found in storage type 104
    Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
    Pls help me.
    Sen

    Hi all,
    Thanks for your replies.
    Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
    Storage Bin search Strategy:
    (1) By storage section: Not active
    (2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
    I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
    This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
    When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
    Hope my scenarios are clear. Thanks in advance for your help again.
    Best regards
    Nagarajan

  • Error Addition to stock of material A in storage type 002 is not allowed

    Dear all,
    I am doing GR for PO in WM. During TO creation I am getting this error Addition to stock of material  A in storage type 002 is not allowed. Hence  no storage bins can be entered. May I know under what scenarios this type error props up?
    Thanks  in advance,
    Prashanth

    Please find the explanation in SAP online help:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8449d4afa11d182b90000e829fbfe/frameset.htm
    SPRO > LE > WM > Master Data > Define Storage Type
    Check
    - putaway strategy --> V_T3010-STEIN
    - addition to existing stock indicastor ---> V_T3010-ZULAG
    As you can read in the help, other factoers such as capacity may influence this.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Feb 19, 2010 7:55 AM

  • Error during Stock movement between two storage type

    Dear Friends
    How do i move the stock from one storage type to other storage type within a warehouse?
    In the material master i have maintained a storage type indicator for automatic storage type determination.
    now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
    Error occurred during storage section search (1740 003)
    Message no. L3041
    Diagnosis
    No storage area search has been defined for this material and this storage type.
    Please assist
    Thanks

    Dear,
           Kindly specify the storage section indicator in Material Master - WM view.
    Regards,
    Sandip

  • Regard an error "Storage type & notsuitable as interface (SU mgmt is active

    Hi All,
    I am trying to do the inventory clearing in both warehouse and Inventory management using the transactions LI20 and LI21 after counting the inventory. But whenever I am trying to do the writeoff's I am facing with an error "Storage type & not suitable as an interface (SU management is active)"
    I couldnt able to figure out the main cause for this error. Your valuable suggestions would be highly appreciated.
    Regards,
    Shane

    Hi Jürgen L,
    My objective is to do physical inventory and of ther are any differences then write them........in this sytem Both Grants and fund management is involved?
    I am getting this message while I am doing LI21. And you have suggested that, the difference storage type SU managed. which is a 999 storage type. and  this is not SU managed.
    I would also like to ask regarding the clearing of differences in warehouse and Inventory mangement. I am using the mvmt types 711 and 712, But what account documents will get generated. I am thinking there will be no account documents that will get generated. Adding to this I am getting "Account 6701 requires an assignment to a CO object with Message no. KI235". If we do this assignment to this CO object......... doesnt the transaction go and hit the balance sheet account.
    I am lil baffled with this whole process. If you could give me your valuable information, that will help me a lot.
    Shane.

  • SUT Error at TO Creation from Non-SU to SU managed Storage type

    Hi
    I am creating TO to move quants from Non-SU Manged Storage type to SU managed Storage type, but at first its giving error saying Enter SUT for storage type.  These Non-SU managed Storage types are not having SUT Check but SU Managed storage type is having SUT Check.
    I tried to update WM view-2 with SUT and palletization but still issue exists.
    I am having batch job for RLAUTA10 where TR is converted to TO but due to above issue , this batch job is getting failed.
    I am deseperately trying to find the root cause and fix this asap.  Let me know how this issue can be resolved??
    Thanks

    Like I mentioned earlier in my posts, SU's are typically not managed in interim storage types. Apparently, in this case, the PSA is an SU managed location and you are trying to move inventory from a non-SU ST to SU PSA ST. The isse that you are encountering is due to the reason that the palletization data maintained in the material master is defaulted during receipts rather than staging therefore, the SUT field in the TR remains blank. But, due to business reasons you are using SU's in PSA's then you'd have to venture into development options to include SU types during automatic converion of staging TRs into TOs.

  • In mb1b when am doin 311 am getting storage type error

    Hi friends,
    Storage type 005 is not suitable for an interim storage area, this error am getting when i do 311 in mb1b
    thanks and regards,
    bala r.v

    Check your config for storage type 005. Make sure you do not have the storage type repeated in the Origin and Destination storage types. You should have the "Dynamic" box checked next to the storage type and not populated with storage type 005
    IMG path below recalled from memory, so it may not be exact)
    IMG: Logistics Execution > Warehouse Management > Master Data > Maintain Storage Type. Check storage type 005 for your warehouse

  • Replenishment From SU Managed Bulk Storage Type

    Hi Experts,
    We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
    Our scenario is the following:
    We have a SU Managed Bulk Stype: Stype 702
    We have a SU Managed Stype with Putaway Strategy "P": Stype 701
    We have material 11000026 and we define the following in WM View 2:
    Max Qt: 6000
    Min Qt: 2000
    Replenishment Qt: 3000 
    Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
    So far we have done the following:
    Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
    We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
    Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
    We assigned the SType Indicator to Material in WM View 1.
    Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
    (The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
    Thank you,
    Leonidas Oyaga

    Hi Mihailo,
    Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
    (Before doing this, I deleted ID Point 711 from SType 701).
    I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
    For Instance:
    Material 11000026 Stype 701
    Min Qt: 2000
    Max Qt: 6000
    Replenishment Qt: 4000
    Storage Bin Capacity in 701: 1000
    When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
    Best Regards,
    Leonidas Oyaga

  • Suggest Dimension Storage type (ROLAP or MOLAP)

    Hi All,
    I have a 5 Dimensions and 10 Facts in my SSAS MOLAP Cube. We are planing to change the Cube storage from MOLAP to ROLAP.
    Each fact has 40 to 50 million records and Dimension are having just 1000 to 20000 records. I am planing to update the Fact storage to ROLAP and Dimension storage type to MOLAP (takes 10 min to process all dimensions).
    I want to enforce the strict data integrity. 
    Please suggest Pros & Cons
    Thanks in advance
    Ram MSBI Developer

    Hello,
    Thank you very much for providing comments. We would like to have a real time data in cube so that we are changing the MOLAP to ROLAP.
    Please suggest on below thing:
    Lets assume, I have updated Dimensions to MOLAP and Facts to ROLAP and Cube is Processed @ time t1. @time T2 my dimension is updated with latest values in Relational DB but not Cube.  But Facts are up to date as it lis on ROLAP. 
    So I would like to have latest data for my dimensions in Cube without effecting live users. Please suggest the best approach?
    Ram MSBI Developer
    Hi Ram, in the case you describe above, where new data is added to the dimension and fact tables in the relational DW (or data mart) then the users will receive an error if they try and slice the fact data by the dimension and there is a reference in the
    fact table to the new data that was added to the dimension. This is because the MOLAP dimension has not been processed yet and so it doesn't recognize the key value referenced by the ROLAP measure group.
    A recommended strategy for this scenario is to use "push mode processing" where the MOLAP dimension is updated at the same time as the relational DW. You can read more about that
    here.
    BI Developer and lover of data (Blog |
    Twitter)

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

Maybe you are looking for

  • Garage Band is recognizing ".aif" format loops but not ".aiff" format loops

    All of the ".aif"-formatted loops (from Jam Packs, etc.) are showing up fine in the Loop Browser, but other loops I bought from third-party vendors that are in the ".aiff" format are not showing up at all in the loop browser. They are all in the same

  • Can't copy iTunes or Library music to CD that will play in my car stereo

    I am having problems burning purchased iTunes (and my own CDs in my Music Library) to a CD that I can use in my car stereo. I've read the articles on how to do this, but it's not working for me. The purchased CD is in the AAC format as are my own CDs

  • Workflow with Object Type LFA1

    Dear Workflow Gurus, My business scenario is as follows: 1. User will create the Vendor Master 2. Workflow will be triggered to the Manager so that he can check it (Display only) Basically, I created a workflow with the following: Start Event - BO LF

  • [Solved] Decrypt files securely inside lxc container.

    Hi, this is my first question, I've been using Arch for 5 years now, thanks for all your hard work! I'm trying to setup an lxc container to securely view encrypted files(gpg keys encrypted with cryptsetup and a loopback device), I've done so already

  • How could I set the proxy settings for just some URLs and not for all?

    Hello, I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security. I know that I can set the proxy settings in the system properties, and this works perfect. But I don't want to set the