Error mesage whilst........

Hi all,
I am trying to create a Inbound delivery from a STO and Im getting the following error message. This is in SAP RETAIL as shown below. I have checked all and I dont know what it can be.
Logistics calendar does not exist
Message no. VL099
Diagnosis
Factory calendar is not recognized.
Procedure
The error message has two possible causes:
Check the entries in the customer calendar for the unloading point on the unloading point screen in master record for the ship-to party.
Check the billing date entry in the billing data in the customer master record and in the billing details data in the header of the underlying sales order.
Note the special rules for billing dates defined in the factory calendar, if relevant.

Hello,
check for the factory calender in t code OVR3, in that check for the hworking times, holiday days .
in step second, assign the calender to the ship to party , in general data tab , there is unloading point sub tab,
there you can mention the customer calneder
through this it should also be dtermined
Hope this helps
Thanks
akasha

Similar Messages

TS1702 i purchased an app from apple store, an error occurred whilst downloading. I tried to reinstall it on my comp. but it reverts me back to PURCHASES & commands me to tap on INSTALL, but nothing happens. How can I solve the problem please???

I PURCHASED AN APPLICATION FROM APPLE STORE. AN ERROR OCCURRED WHILST DOWNLOADING IT. IT WANTS ME TO REVERT BACK TO PURCHASES IN ITUNES, AS SOON AS I TAP ON "INSTALL" IT SHOWS THE SAME MESSAGE AGAIN. HOW DO I SOLVE IT PLEASE? IT SHOWS ON MY STATEMENT THAT I PURCHASED THE APPLICATION?

Try redownloading the app directly to the iPod by:
]Downloading past purchases from the App Store, iBookstore, and iTunes Store
It may be that iTunes is not signed into the account that purchased the app or that the computer is not authorized for that account.
iTunes Store: About authorization and deauthorization

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

HT1414 My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on its own? There is a lot of data I want to save

My ipad has gone into recovery mode after an "error occured" whilst trying to update it. Will it come out of recovery on it's own? There is a lot of data I want to save before restoring it to factory settings

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
If not, you will just have to reenter all of your settings all over again. Have you ever backed it up successfully?

Software Update Failed: An error occurred whilst downloading iOS 7.0."

Tried three times and three HOURS later, ON eACH Occassion!!:
"Software Update Failed: An Error Occurred whilst downloading iOS 7"
I am in South Africa

Hey there,
As Sneaky_Mouse suggested the best option is atm iTunes. Servers are probably going crayze.
If you cannot do it like that as well you can look for an iOS 7 ipsw (image file) and then, hold down either Option or Shift (on a Mac or Windows PC) and click Update; this will allow you to select the ipsw image.
http://www.techradar.com/news/software/applications/ios-7-is-here-and-ready-for- download-1182104
Hope it helps,

Exception message 26, (only warnning not an error mesage).

Dear Experts
my environment is MTO, which generates a huge number of production orders daily with a big number of exception messages which some times are not enough to adopt the PP activities on the system,
in the case of (Procurement type:X) which the planned order for a HALB or FERT, material can be produced internally or procured externally, i can partially convert a part of the total quantity into a production order or a purchase requisition and so the remaining qty, into any of the both procurement proposals.
now if the total quantities of the partially converted production orders and purchase requisition, is exceeding than the planned order qty, i am getting the exception message 26, (only warnning not an error mesage).
my requirement: i want the system to restrict users to covert the planned order into a production order or a purchase requisition if the total quantities of all the partially converted production orders and purchase requisitions are exceeding more than the original planned order quantity.
Example:
planned order qty, is 10 EA, if i convert a qty, of 3 EA into a partial production order and another qty, with 4 EA into a purchase requisition,
system must restrict me to convert the remaining qty, into a production order or a purchase requisition if i changed the qty, to a qty, exceeds more than 3 EA.
Thanks in advance.

Ahmed,
Exception message 26 is neither a warning nor an error. It is an alert that a certain business condition exists (excess stock in a segment). The general rule for exceptions is that it is up to the planner to determine the significance, and to use your company's business rules to react accordingly.
The solution to your stated requirement does not exist in standard SAP. To me, it makes no sense to lock the system down in this way. Message 26 can come from overconversion, but it can also come if the requirements are reduced.
If you still feel that this functionality must be implemented, I would suggest this partial solution, that uses standard functionality. Have your planners perform only the conversions of the plndords to firmed purchase reqs, for a given time frame, all at one time, and decline to convert the remaining balances to production orders. Then, re-run MRP with delete/recreate. This will create planned orders for exactly the balance(s) required. Then, you could immediately use the standard mass program to convert the 'balance' Planned orders to Production orders. The mass conversion could be the second step of an auxiliary MRP job.
If you insist that the requirements must be met using the method you indicated above, then it implies that every program that could be used to convert a PlndOrd to something else must be modified. I don't think I would attempt this unless there were no other possibilities.
Best Regards,
DB49

Error -110 whilst initialising SD card

When I enter my 8GB Class 6 Samsung MicroSD card into the cardreader (mmc), 4 times out of 5 it does not mount. dmesg gives this:
error -110 whilst initialising SD card
I am not sure, but it appears to be timeout issue (the system does not wait long enough?).
The behaviour of the card in the mobile phone:
The same card mounts perfectly fine each and every time on Android 2.4 and/or ClockWordMod bootloader, but on Android 4 and/or 4ext bootloader it exhibits the same issues as on Arch.
Last edited by Lockheed (2012-06-17 09:16:08)

The problem is that some cards are just too slow to initialise, and kernel gives up on waiting for them.
For mobile phone, there is no solution other than using older kernel (in some GingerBread ROM) or changing the SD card.
For computer, just change the card. I don't think it's worth the trouble trying to solve it in other ways.
Last edited by Lockheed (2015-02-14 19:46:08)

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

Error Mesage is "Could not reserve record (2 tries) keep trying ?

sir,
when i running my form i m reciving this error message Error Mesage is "Could not reserve record (2 tries) keep trying ? " This is due to multi user Login, How can i avoaid from this error message.

when you begin changing queried values, forms locks the record for other users by default. so this message appears if another user tries to change (lock) the same record. you have to wait until the locked record is commited or rolled back.

Always pop-up error mesage when i run the cd-rom program

Always pop-up error mesage when i run the cd-rom program - Macromedia Projector發生問題，必須關閉，謹此致歉

You need to disable "Autoplay" for your CD drive. In the Control Panel under Hardware.

MSS Workflow - An error occurred whilst processing the notification

Hi Experts,
Urgently need your help to resolve <i><b>"An error occurred whilst processing the notification"</b></i>. I am using MSS portal and working on Recruitment workflow. When I am submitting an invitation. I am getting this error.
I tried to search a possible cause on SDN / OSS but could not get any solution.
Could you please help me to resolve this issue.
Thanks and Regards
Pras

Hi,
There could lot of reasons behind it. Once you encounter this error go to the backend system and run transaction ST22 which will give you the list of short dumps that have occured. Maybe the application goes for a dump.
If there are no dumps then go to transaction SWIA and check for the workflow log if there are any errors within the workflow.
Hope this helps,
Sudhi

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn't be completed. (OSStatus error -61.)

HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW: The operation couldn’t be completed. (OSStatus error -61.)

Hello,
I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well! The slide show transferred and the surprise 70th birthday party was a huge sucess. Thank you everyone!

Import error: An error occurred whilst running the import.

---------------------------
Import error
An error occurred whilst running the import. The import log file will now be opened.
Exception details:
Microsoft.SharePoint.SPException: The file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530. ---> System.Runtime.InteropServices.COMException (0x81020037): <nativehr>0x81020015</nativehr><nativestack></nativestack>The
file WO_11_12_A_109/STAGE 1ST has been modified by (unknown) on 29 Sep 2014 16:45:44 +0530.
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.UpdateFileOrFolderProperties(String bstrWebUrl, String bstrWebRelativeUrl, Object varProperties, Int32 fMigrationSemantics, Int32 fReGhost, Byte& piLevel)
at Microsoft.SharePoint.SPFolder.UpdateOnImport()
at Microsoft.SharePoint.Deployment.FolderSerializer.SetObjectData(Object obj, SerializationInfo info, StreamingContext context, ISurrogateSelector selector)
at Microsoft.SharePoint.Deployment.XmlFormatter.CallSetObjectData(Object obj, SerializationInfo objectData, ISerializationSurrogate surrogate, ISurrogateSelector selector)
at Microsoft.SharePoint.Deployment.XmlFormatter.ParseObject(Type objectType, Boolean isChildObject)
at Microsoft.SharePoint.Deployment.XmlFormatter.DeserializeObject(Type objectType, Boolean isChildObject, DeploymentObject envelope)
at Microsoft.SharePoint.Deployment.XmlFormatter.Deserialize(Stream serializationStream)
at Microsoft.SharePoint.Deployment.ObjectSerializer.Deserialize(Stream serializationStream)
at Microsoft.SharePoint.Deployment.SPImport.DeserializeObjects()
at Microsoft.SharePoint.Deployment.SPImport.Run()
at COB.SharePoint.Utilities.DeploymentWizard.Core.WizardDeployment.RunImport()
OK

Actual error is given below.
Is there any way to import it without any error?
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=65.57336
10/06/2014 14:37:33.20 SPContentDeploymentWizard.exe (0x1544)
0x117C SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=45.483792
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1378 SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.316736
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
b4ly Medium
Leaving Monitored Scope (import). Execution Time=30.521776
10/06/2014 14:37:33.21 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
nasq Medium
Entering monitored scope (import)
10/06/2014 14:37:33.24 SPContentDeploymentWizard.exe (0x1544)
0x1378 SharePoint Foundation
Monitoring
b4ly High
Leaving Monitored Scope (Event Receiver (CHDocumentLibrary, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9f4da00116c38ec5, CHDocumentLibrary.WorkOrderContentItemEventReceiver)). Execution Time=27.246848
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
b4ly Medium
Leaving Monitored Scope (import). Execution Time=52.29824
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x1600 SharePoint Foundation
Monitoring
nasq Medium
Entering monitored scope (import)
10/06/2014 14:37:33.27 SPContentDeploymentWizard.exe (0x1544)
0x117C SharePoint Foundation
General
8kh7 High
<nativehr>0x81020015</nativehr><nativestack></nativestack>The file WO/STAGE 1ST/Amd has been modified by (unknown) on 06 Oct 2014 14:37:33 +0530.

When trying to download the latest itunes it stops half way through and says "error occured whilst installing the update

when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
anybody know how to fix this?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Error mesage whilst........

Similar Messages

Maybe you are looking for