Error message 0X80020022 error code when burning CD.

Does anyone have any idea what this error message is? I was trying to burn a DVD on X8 speed...
If anyone could help I would appreciate it!
Thanks
Kris

I believe it's a hardware issue anthough don't quote me on that as I'm not sure. I would call AppleCare with this error code. They'll know for sure. I would also try burning to a differnet brand media to ensure it's not a media issue. I would suggest you try Verbatim DVD-Rs.

Similar Messages

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC

I have a dll built using LabVIEW 6i. I am calling the dll from a VC++ application. When the application loads I get an error pop-up 'cannot find LabVIEW runtime'. If I change the VC++ code to dynamically load MFC (using the loadlibrary function) or dynamically load the LabVIEW dll I created then the problem goes away. Only when both are loaded statically do I get the error message.
The target machine is running Win2K pro and has the LabVIEW runtime installed.
I do not want do dynamic loads as I need to call the dll from a legacy application. Are there any options to change the way LV links to MFC or to force the dll to find the LV runtime?
Alan Widmer

Ben,
I have attached a ZIP of the files required to test a DLL from an MFC application. Or you can build the same application by following the instructions below. I used the numtest dll that you previously sent to me so there is no 'magic' in the LabVIEW or dll.
In VC++ select NEW. Pick the MFC AppWizard (MFC) to build an MFC application. In the wizard select
Project Name: MFCNumtest
Single Document
No database support
No Compound document support
Support for ActiveX
Default settings on the Features page
MFC Standard
MFC as a shared DLL
From the ResourceView of the project explorer, add an item Test to the IDR_MAINFRAME menu then add an item Go as a submenu item (with an ID of ID_TEST_GO)
Right click the new menu item and run the Class
Wizard. Click Add Function.. button to make a function OnTestGo()
Open MainFrm.cpp and scroll to the end of the file to see the skeleton for the OnTestGo function. In this function add a call to the LabVIEW dll. You will also need to add a reference to the .lib file and the usual extcode.h.
When you run the app you will see a window with the Test menu item. Select it and click Go to run the call to LabVIEW.
This all works great. If you now go to Project | Settings and on the general tab change the Microsoft Foundation Classes: item from 'Use MFC in a shared DLL' to 'Use MFC in a static library' rebuild ALL files in the project and run the app you get the error message:
System error 998 while loading the LabVIEW Run-Time Engine (C:\Program Files\National Instruments\shared\LabVIEW Run-Time\6.0\\lvrt.dll).
numtest requires a version 6.0 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of numtest to correct this problem.
I apologies for my slow response, g
ot distracted by some other issues.
Thanks for your help,
Alan Widmer.
Attachments:
mfcnumtest.zip ‏44 KB

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I get error message "unknown error" When trying to log on to itunes via pc, help please!

Hello, trolle56.
Thank you for the question. You may find these articles helpful in troubleshooting the error received with the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

Error message to be thrown when multiple enteries are not entered

Hello Guys,
I have used a select-options with no intervals in the selection screen.
If the user enters one value in the range, its working.
But I want a error message to be thrown when only one entry is entered. User should enter more than one entry always.
I used low and high but its not working.
Kindly guide me.

No intervals only works on the main screen. If the press the right arrow and go to the ADDL choices, they can choose the entire database table in a single range....Your test is, therefore, too simplistic. If you want to limit this on both the main and the additional choices screens, you have to implement Function Module SELECT_OPTIONS_RESTRICT in the Load-of-Program or Initialization event.
Why not select from a table into a work table where the values are IN the select-options and see how many the user obtained?
Something like this:
Select <your field> from <your table> into table <your internal table>
where <your field> IN <your select-options>.
if lines( <your internal table> ) lt 2.
<your error message>.
endif.

When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.

When updating my iPod Nano, I get the error message: Unknown Error 9006. Any help is appreciated.

See this
http://support.apple.com/kb/TS3694#9006

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

Receive error message "An error occurred while trying to access the service" when I try to convert a file?

When I attempt to convert a file, either to PDF or from PDF I receive the error message "An error occurred while trying to access the service" what can I do to resolve? I already applied updates and attempted to fix?

You could always sign into Acrobat.com directly and use the service through the web site if it's a critical need.

My iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?

No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820

Error message 0X80020022 error code when burning CD.

Similar Messages

Maybe you are looking for