Error message 0x8002006e when i try to burn cd

I am getting an error message when i try to burn a cd. the error message is  0x8002006e

Joe,
Check out these links:   OS X Mountain Lion: If an error message appears while you’re burning a CD or DVD
and   OS X Mountain Lion: If you can’t eject a disk
But, you'd better ask this question again in the forum for your mac. I don't know which type of Mac you have. Pick the link from this list.
iMac (Intel)
Mac mini
Mac Pro
Power Mac
iMac (PPC)
eMac
MacBook Pro
MacBook Air
iBook
MacBook
PowerBook

Similar Messages

  • HT1349 I get error message 4450 when I try to burn a CD.  What is 4450?

    Can someone please help with this error message.

    Using Windows?
    Can't burn a CD in iTunes for Windows
    This error has also been associated with defective blank CDs, so try another brand.
    It has also been (less commonly) attributed to a dirty laser LED.

  • I am getting error message 4251 when I try to burn a CD  tried everything can anyone help PLEASE!!??

    I ahve tried numerous times to burn from itunes to a cd but everytime I get an error 4251 - the cd ejects and just cant get it to work - I have tried so many times and have no idea how to solve the problem - not tech minded so please any help in language I can understand ! thanks

    I am also having the same problem . I am on Windows Vista and haven't been able to burn CD's for a long time
    I tried the diagnostic tool but got 'green lights' on everything ?
    Really has put me off purchasing more Apple products

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • I am getting an error message -41 when I try to send my project to IDVD

    I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

    Hi
    The Error -41   mFulErr  Memory full (open) or file won't fit (load) - means that memory is full
    Memory can be more than one thing
    • RAM - usually is enough and rarely give this error
    • Start-Up Hard disk - is TO FULL - very common origin to this signal
    • Other hard disks - Usually do not have any thing to do to this
    So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
    My minimum is 25Gb free space and especially if iDVD is to be used.
    This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
    Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
    Yours Bengt W

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

    I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

    Hello, not too helpful, but...
    enum {
      paramErr                      = -50,  /*error in user parameter list*/
    Usually means a bvad or unacceptable Charachter in a File or Folder name...
    http://support.apple.com/kb/TA20831
    Solving Trash Problems...
    http://thexlab.com/faqs/trash.html
    Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

  • "The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    Dear Lawrence Finch: 
    If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
    "The iPhone software update server could not be contacted."
    No, I did not hack anything (are you kidding?  Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB.  Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
    Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
    Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with: 
    1.  OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]).  So that can't be the problem.
    Here's all the other things apple & others say to check which I already checked:
    2.  USB ports are FINE, both work FINE, so that's not the problem.
    3.  No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
    4.  No "usb hubs."
    5.  Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]).  If you know of a newer one for this OSX, please advise.
    6.  No antivirus software.
    7.  No security software.
    8.  No routers; only 1 comcast modem, period.  Wired Ethernet.
    9.  No wifi gadgets, no wifi at all.
    10.  No firewalls, except what is on iBook in the SHARING/System-Prefs. section.  It's turned OFF.
    11.  Did the hosts/terminal thing sudo nano whatever it was.  There were only 3 lines, NO gs.apple.com:
    xxxxx local host
    xxxxx broadcast host
    xxxx local host
    Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
    So that's it.  If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
    Many thanks!

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

  • HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    Welcome to the forums.
    Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings.  You could start a new iDVD project, or try deleting encoded assets.
    Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have).  Double layer DVDs can be finicky and are used for video more than 2 hrs long.
    Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
    For a detailed treatise, see:  https://discussions.apple.com/thread/3926901?tstart=0
    John

  • Error message 1004 when i try tp update apps

    i get error message 1004 when i try to update apps on my ipad

    This actually has a very simple fix, that has worked all the times I have seen it.   Simple goto Settings > Safari >  Then reset the cookies, Reset the Cache, and Reset the History.  Now turn the iPad off and then on again.  It should work fine now.
    David

  • HT1918 Error message 11556 when I try to login to itunes

    I keep receiving error message 11556 when I try to login to iTunes.... Any suggestions?

    Hello payton01,
    I found a couple of articles with steps you can take when you are not able to connect to the iTunes Store.  I recommend reviewing the following articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I keep getting error code 0X80020022 when I try to burn a DVD. Is there a solution?

    I keep getting error code 0X80020022 when I try to burn a DVD. Is there a solution?

    read  "more like this" over to your right for similar disussions.

  • HT1349 I have an error 4315 occurring when I try to burn music files to CD

    I have an error 4315 occurring when I try to burn music files to CD.
    I run a theatre school and I am trying to burn my downloaded backing tracks to CD
    An error 4315 occurrs and the files do not completely burn to the CD

    Video Display Information
    ATI Technologies Inc., ATI Radeon X1200
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2443be07c9f35b3f3550180501e1e1d9
    iPodService 10.2.2.12 is currently running.
    iTunesHelper 10.2.2.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: UBHelper (2.0.0.8),
    UpperFilters: NTIDrvr (1.0.0.8), GEARAspiWDM (2.2.0.1),
    E: Optiarc DVD RW AD-7580S, Rev FX04
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are:   10 16 20 24.
    The drive CDRW speeds are:   10.
    The drive DVDR speeds are:   10.
    The drive DVDRW speeds are:   10.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4220(0x0000107c). It happened on drive E: Optiarc DVD RW AD-7580S on CDR media at speed 24X.

Maybe you are looking for