Error message 0xc0000034 at startup / no recovery drive / yoga 13

Hi,
I have an urgent problem: at startup, there is the following message on my screen:
Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error Code: 0xc0000034
You'll need to use the recovery tools on your instillation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer
Press ESC for UEFI Firmware Settings
When I press ESC (or alternativelzy F2 or F12 during startup) I get to the InsydeH20 Setup Utility.
I've searched online and did not find a solution. The main problem: I DON'T HAVE ANY INSTALLATION MEDIA! The notebook came with recovery partition on the harddrive. I applied the official Lenovo hotfix after receiving the notebook. The hotfix repartitioned the HD and also the recovery partition, I suppose. This was a long time ago and I never had any problems since. I also noticed that some time ago, Windows stopped downloading updates.
Help is very much appreciated!!

MORE INFO: It does NOT seem to be an iCal problem; rather a system startup error-- or even when logging-out and logging-back-in I get this. It seems a -39 error is:
-39
eofErr
End of file; no additional data in the format
but I don't know what this means; nor why I'm getting this now, just today, at startup. Should I repair permissions or verify disk or???
Any assistance really appreciated.
Regards, Steve Monday 3 April 2006 @ 13:31

Similar Messages

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

I am getting this iCloud error message at pc startup: The procedure entry point_objc_init_image could not be found in the dll

I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....

i ahve same problem

Getting this error message: FLAGFOX VERSION: 4.2.x (2013-11) ERROR MESSAGE: Fatal Flagfox startup error! EXCEPTION THROWN: IPv4 DB file is corrupt (got 508296

After the message the program runs fine. How do I get rid of the error?
FLAGFOX VERSION: 4.2.x (2013-11)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: IPv4 DB file is corrupt (got 508296 bytes but expected 504414 bytes)
BROWSER: Mozilla Firefox 26.0 (Gecko 26.0 / 20131205075310)
OS: Windows NT 6.1; WOW64 (WINNT x86-msvc windows)
LOCALE: en-us content / en-us UI / en-us OS

Try posting in the Flagfox forum. <br />
http://flagfox.net/forum/

FLAGFOX VERSION: 4.2.x (2013-6) ERROR MESSAGE: Fatal Flagfox startup error! EXCEPTION THROWN: IPv4 DB file is corrupt (got 493668 bytes but expected 489672 by

FLAGFOX VERSION: 4.2.x (2013-6)
ERROR MESSAGE: Fatal Flagfox startup error!
EXCEPTION THROWN: IPv4 DB file is corrupt (got 493668 bytes but expected 489672 bytes)
BROWSER: Mozilla Firefox 22.0 (Gecko 22.0 / 20130618035212)
OS: Windows NT 6.1 (WINNT x86-msvc windows)
LOCALE: en-us content / en-us UI / el-gr OS

does disabling all addons but flagfox work, you seem to have a lot of cookie programs that may conflict.

I keep getting an error message that says that the hard drive cannot be repaired. Therefore I cannot get the computer to start up.

I keep getting an error message that says that the hard drive cannot be repaired. Therefore I cannot get the computer to start up.

It doesn't sound like you are doing anything incorrectly from what I can see. Have you tried restarting the iPad and then see if you can backup?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

'No Disk' error message on Photoshop startup

Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive \Device\Harddisk3\Dr3 is supposed to mean. Does anyone have a clue what Ps is complaining about?

I realize this is a mighty old thread, but I've recently had the same issue with Illustrator CSS 2014, and this is the only thread I could google that dealt with it.
I scratched my head for a while on this, but I think I figured out the issue. At least I think I figured it out on my end. The error comes from the "recently opened" menu as far as I can tell. I had an old external hard-drive that I was browsing some old work on. I unplugged it when done and continued to go along with my newer work the next day. When I attempted to save my newer work in Illustrator, I got the "no disk" message several times, but powered through it with "try again" till it saved.
I'm thinking the error is just the system bumping the file that I had recently opened and now cannot locate slowly down and eventually off the "recently opened" menu. Not sure why Windows is smart enough to bypass this error sometimes and not others with most portable drives, but perhaps its an issue with how old this drive was, or perhaps because I did not properly eject the drive. Networked drives being connected and not connected may cause a similar issue. Not sure.

A10-70 giving error message when trying to use flash drive

I have a 32 gb USB flash drive I am trying to use. All I get is an error message: damaged external usb storage
Is it b/c the flash drive is too large or something weird? Don't know what to do.
Solved!
Go to Solution.

Reformat your flash drive to FAT32 format. Plug it to the system and check. To reformat your flash drive, follow below steps:
1. Right click on the flash drive icon and select Format
2. Under Format window, select FAT32 under File system and click on Start.
Note: Reformatting your flash drive will erase all your data.

ITunes 10.5 Error Message on System Startup. AppleSync Notifier.exe.

On Windows XP startup I get an AppleSyncNotifier.exe error message:
"The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Has anyone else had this problem and if so have you found a solution?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Get an error message on premiere startup

Cant open premiere without error message coming up. Have tried reinstall of premiere and problem persists.
This is the error message:
Process:         Adobe Premiere Pro CC [4020]
Path:            /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro CC.app/Contents/MacOS/Adobe Premiere Pro CC
Identifier:      com.adobe.AdobePremierePro
Version:         7.2.1 (7.2.1)
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     Adobe Premiere Pro CC [4020]
User ID:         501
Date/Time:       2014-02-13 11:24:05.660 +0000
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: BB7DE34C-CDCB-7E7A-9E84-22B3FB25B1FB
Sleep/Wake UUID: A7269950-3E71-4B13-96F6-8F4310D0A908
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
*** error for object 0x138dd4458: pointer being freed was not allocated
[Please don't post crash logs to the user forums.]
Message was edited by: Jim Simon

I am Windows, so can't help directly... but some reading that MAY help
OSX Crash http://helpx.adobe.com/creative-cloud/kb/ame-premiere-crash-launch-export.html
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
or
crash on launch
or
crash on startup
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
http://forums.adobe.com/thread/1236603?tstart=0 for a previous "crash on startup" discussion

Error Messages: "There is no disk in drive..." and "Cannot Sync (-124)

Hello everybody,
Kind of a unique case, but problems started for me when I upgraded to Itunes 8 on my new Toshiba Netbook which runs Windows XP. Seems like everytime I open Itunes and insert my ipod nano (4th gen), I get a Windows error message that reads "There is no disk in drive. Please insert disk in drive." After clearing from this message (it doesn't matter whether you press Cancel, Continue, or Try Again), I try to sync my music. No go. I receive an error from itunes that reads "Cannot sync music due to unknown error (-124).
Right now, this case has been kicked around Apple and Toshiba for two weeks. I'm getting frustrated becuase Apple is telling me that it's a fault with the operating system since Windows is assigning the wrong path to ipod. Toshiba is saying its a software problem with Itunes. As I wait for a solution, I have no functioning Ipod since it can't load up any new playlists.
I've tried the 5 R's, created a new user profile on my computer, and even changed the location of my usb drive for my inano. None of it has worked so far. One suggestion did work in getting rid of the error messages but didn't do anything to unlock my inano. It was the suggestion to go into "my computer" and checking the properties of my inano, then checking the boxes to scan and repair any errors windows finds in the inano. After this attempt, I'm starting to believe that it's a software issue with itunes 8. Something I want to believe since it saves me the trouble of sending my new netbook to Toshiba for work.
Any ideas here? Thanks for the help

try uninstalling the drivers
Plug in your iPod
Right click on My Computer and click on Manage
that will bring you to the Computer Management
On the left hand side click on device manager
on the right side click on the plus sign next to Universal Serial Bus Controllers
it will show a list, in that list locate iPod or USB mass storage device
right click and select uninstall
Unplug your iPod and plug it back in
Windows should automatically start installing them again
if nothing pops up then right click on Universal Serial Bus Controllers
and choose scan for hardware changes
If that does not work, try changing the drive letter
Go back into Computer Management
Click on Disk Management on the right
and on the left it should say your iPod
Right click and go into change drive letter and paths
click on the change button
Change it to something like N or M
Click ok, you will get a message saying "changing the drive letter may cause the program to no longer run are you sure you want to change this drive letter"
click ok
then restart your computer

I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
Write Status is Read/Write
SMART Status is Not Supported
Partition Map Scheme is Master Boot Record
HELP!
timothy7712

You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

I-tunes installation error message- trying to put in wrong drive

I was getting the AVG trojan horse warnings so I quickly deleted i-tunes, assuming (mistakenly, apparently) that AVG had detected a virus.
I downloaded i-tunes and attempted to re-install, but very early in the process get the message that "drive d is not available"-- which is true, since that drive is my DVD drive, and I usually install programs on drive C with the rest of the system (Windows Vista Ultimate). I realize this might be more of a windows problem than an i-tunes problems, but the windows people have no ideas and the result is the same-- I am without i-tunes. Is there a way to get the installation to take place on one drive or another? I am not being asked for the place of installation, at least not this early in the installation process (very early-- the first response that pops up after starting to install). I tried putting the installation program in drive C (or verified it was already there, more accurately). I right-click the installation file and check properties but cannot find anyplace to change the installation settings.
Any ideas? Thanks all,
JJ

Try putting a disk in your DVD drive. That might make D: available and get past that silly error message.

Error message 0xc0000034 at startup / no recovery drive / yoga 13

Similar Messages

Maybe you are looking for