Error message 0xc19a0035 on the HP Photosmart C7250
This error message keeps coming up. I have tried the fixes listed at HP Support but it doesn't permanently fix the problem. The 2nd fix says to remove the print head, but it doesn't show the same type of printer that I have, so I can't do it. What else can I do to resolve this problem?
I'm having the same problem! Printer keeps telling me to turn off and restart. When I do, it tells me improper shutdown! UGH! Hope someone has a suggestion!
Similar Messages
-
when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly
I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
I have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?
i have an error message ox61011bed on my hp photosmart plus b209a-m. what does this mean?
The printer was working fine last night but this morning does not want to print.Please try turning your printer Off ant then On,
If the power button is not responding, remove and replug the power cord.
The ox61011bed error code indicates a carriage stall error, if the same error appears after power cycling your device, follow the steps provided below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01768897&cc=us&dlc=en&lc=en&product=3777182&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!
kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport -
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue.
I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
I have tried the other solutions on here with no luck. HELP please.
Many Thanks.Progress Update.
I made a back of what existing phtos and Videos I had on my Iplhone. I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted)
Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio. The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
I then went to bed as the restore is a long process. When I woke up the library had library had cleaned itself up. Mysteriously the prcess had deleted the files missing the their thumbnails.
This is very perculiar and bad behavior.
I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
Here are the lessons learned.
DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store. (I did both :-( -
So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?
I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.
-
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks
Click here and follow the instructions.
(98724) -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.
-
I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
I have never had any problems doing this before, only in the last few days.I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place. And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated. -
I can't seem to open (view) my photos. I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info." I have never had this happen before? Thanks!
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions.
OT -
I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found. Would you like to locate it now?" It happens on each tune I select and a "?" appears beside the song. Does this sound familiar to anyone?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music
Maybe you are looking for
-
While logon to lync it gives error " there was a problem verifying the certificate from the server "
i already go through all threads related to my question. but not even one thread is satisfying my question ok my problem is again the same it gives me error as i mentioned in title. client OS is XP. actually can somebody tell me which certificate i
-
How to download n files to FTP server in background using single report?
Hi all, I have one requriement where i have to download 7 different text ( *.txt ) files to FTP server weekly using single program in background mode. I have populated all the 7 internal tables with their corresponding data. But i dont know how to p
-
Varaint :Variant var_1 ofprogram /1BCDWB/DBVBAK is not thecurrent version?
Hi All, I am trying to save the variant for vbak table which i have to use on daily basis for some reporting purpose in Production system. But Next day it throws an error stating : "Variant var_1 of program /1BCDWB/DBVBAK is not the current version"
-
Hello, Is there a way in SAP to maintain stock in alternative unit at plant level? Would appreciate your input. UV
-
Repair permissions makes machine unbootable
I've repaired permissions which advises about 15,000 various repairs. Reboot then fails with grey screen, circle & cross Reinstall 10.6 Reboot functions normally. Update to 10.6.3 Repair permissions which once again advises about 15,000 repairs. Rebo