Error message 1111 for purchasing a egift card.

I keep getting an error message 1111. I have purchased e-gift cards before I upgraded to v11. Anyone know what to do?

Try this shut your phone Down or if it's off carefully pull the Sim Leave it out of the phone for about 10 min. then re-install power up the phone see if that fixes the issue.. b33

Similar Messages

Error when trying to purchase second eGift Card

I was able to purchase one eGift card but I can't purchase another.
I'm receiving the message: "Please note that the maximum number of vouchers that can be purchased & redeemed by a single user in any one calendar month is 5." When I click "OK" it takes me back to the page where I entered my info, rather than to the processing of my credit card.
I'm not sure if an eGift card is a "voucher," but even if it is, the one purchased is the only one I've ever purchased. Any help on getting around this error message would be greatly appreciated!

OK, I figured it out, thanks to a ridiculous email from ChatandVision that my order was selected for additional security checks and processing will be delated.
Even though I ordered a $75 gift card, it comes as 3 $25 gift cards. So, when I tried to buy another $75 gift card, that was also 3 $25 gift cards, putting me over the "5 voucher" limit. I purchased $50 for the second gift card and it worked fine.
Really terrible experience all the way around, Skype.

Having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed for assistance contact itune support

having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed for assistance contact itune support

If you haven't already done so, then to do so as the message says and contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption

Error message while viewing Purchase order summary

Hi all,
we are in 11.5.10.2 , we are getting error message while viewing purchase order "Currency formatting cannot be performed without a currency code".
is it beacuse of currency not popluated in Purchase order?
Verified metalink note - 960504.1
Thanks
Kiran

Hi Kiran,
Verified metalink and other areas but could not get any appropriate solution.
I tried to reproduce the issue in various available environments...but no luck!
My guess would be the datafix/BUG that you have referred in the MOS note 960504.1
Please check with your DBA for this patch in test instance.
Thanks
-Arif.

TS1424 Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later

When I attempt to purchase a song from itunes, I keep getting the following error message: Could not purchase "song name". An unknown error occurred (-42408). There was an error in the itunes store. Please try again later
Can anyone help solve this problem?

I've done a search on here and haven't found any solutions posted for it for windows computers. You could try posting in the iTunes For Windows forum and see if you get any suggestions in there (are you able to download other items from the store e.g. a free app ?) - I use a Mac, the only things that I could think of to suggest trying is see if you get the same error on a different iTunes library :
creating and/or opening a different iTunes library : http://support.apple.com/kb/HT1589
or using a different user account on your computer in case it's a problem with that user account.
But you may want to try the iTunes For Windows forum first, apart from anything else you are likely to get better help for the above

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

I have an iphone that I just deactivated (SIM card removed) - I still want to sync with iTunes but keep getting error message that there is no SIM card installed?

I have an iphone 3GS that I have inactivated as of today. I still wish to sync this phone with iTunes (did a restore as I transferred my data to a new iPhone). However, iTunes is giving me an error message that there is no SIM card installed in the iPhone I'm attempting to activate. I've powered off the phone, held the power button & home button until iTunes popped up with restore note. Re-did the restore (twice) but still coming up with same error message.

Kind of what I figured.....will I be able to sync to iTunes in future as many times as I want without the SIM card (once it's activated again)?

Output Message Determination for Purchase Order

Hi all !
Can anybody please explain in brief, the procedure for Ouyput message determination for Purchase order. (including printer settings)
I have tried it throgh the Standard Configuration guide. but i am not able to do.
Please explain step by step including form attachment.
Thanks in Advance !!!!

Hi,
Customization steps for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Note1
Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regarding above.
Check the following also:
Spool generated using SP01 or SP02.
Output device.
Local printer settings.
Paper Tray, Print Mode, Printer
Note2:
Check MN04 and NACE t.codes
Regards,
Biju K

LIV - credit memo : error message shown for unit price variances

hi
In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO). Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
thanks

Hi,
If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
Is this giving you a particular problem?
remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
Steve B

API for Purchasing iTunes gift card and Transferring to user

Hi,
Is there a way to Purchasing iTunes gift card and Transferring to user?
Is there are any SDK or API is available for Purchasing iTunes gift card and it returns code which is useful for redeem product?
Or credit an iTunes account?
Thanks!
Krtya Softwares

This forum is for questions about iTunes U, you will be better off asking in the developer forums : https://devforums.apple.com/index.jspa

Error message 1111 for purchasing a egift card.

Similar Messages

Maybe you are looking for