Error message 11333 fix problems.
I tried to download the programs for the fix but I got an error message that says, "Error loading cryptext.dll. The specific module could not be found."
Anyone else get this error message?
Problems connecting to the iTunes Store often stem from issues with the Windows firewall or a firewall in a router, a privacy filter (such as McAfee Internet Privacy Service or Norton Internet Security), an antivirus/antispyware utility, or a download accelerator. Start here:
iTunes for Windows: iTunes Store Connection Troubleshooting
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators, or Firewalls
Tunes for Windows could not establish a secure connection to the iTunes Store
iTunes for Windows: Possible iTunes Store Errors
for some basic tips to start isolating the cause of the problem. What you may need to do is temporarily disable any such service and see if that fixes the problem. If so, then if it's a firewall/Internet filter that's causing the problem and you'll need to set the offending service to allow iTunes to connect to the iTunes Store.
Hope this helps.
Similar Messages
-
Error message 11333-itunes store??
hi
can't access itunes store. All i get is error message 11333 and asked to check connectivity (which is fine) which i can't resolve, all else is working normally, anyone help??Problems connecting to the iTunes Store often stem from issues with the Windows firewall or a firewall in a router, a privacy filter (such as McAfee Internet Privacy Service or Norton Internet Security), an antivirus/antispyware utility, or a download accelerator. Start here:
iTunes for Windows: iTunes Store Connection Troubleshooting
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators, or Firewalls
Tunes for Windows could not establish a secure connection to the iTunes Store
iTunes for Windows: Possible iTunes Store Errors
for some basic tips to start isolating the cause of the problem. What you may need to do is temporarily disable any such service and see if that fixes the problem. If so, then if it's a firewall/Internet filter that's causing the problem and you'll need to set the offending service to allow iTunes to connect to the iTunes Store.
Hope this helps. -
I have Elements 9 Windows. When i try to "Get Media" I get an error message "encountered a problem"
I have Elements 9 Windows. When I try and "get Media" I get an error message "encountered a problem needs to close"> How do I fix?
We'll need more details:
What version of Photoshop Elements? Include the minor version number (e.g., Photoshop Elements 9 with the 9.0.3 update).
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
If you are getting error message(s), what is the full text of the error message(s)?
What were you doing when the problem occurred?What other software are you running?
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
Has this ever worked before? If so, do you recall any changes you made to PSE, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
Ken -
I keep getting an error message saying a problem has cause the program to work incorrectly.
Every time I try to connect to itunes, I get an error message saying a problem cause the program to work incorrectly. I am on a desktop and trying to download songs and a movie that I purchase on my ipad mini.
Hi EmilioB,
Thanks for visiting Apple Support Communities.
If iTunes is not working or quitting unexpectedly, see this link for troubleshooting steps that can help:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If the iTunes application is working, but you cannot connect to the iTunes Store, try the steps in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy -
I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?
Same issue here, previously did work perfectly
-
2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.
You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install. -
When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Does not open.
Instead Microsoft error message "encounters a problem and needs to close".
I have already tried the uninstall & reinstall "solution".
What else can I do. I have a paid for document I would like to read.
Thanks.Hi ynotcookit
Please make sure that antivirus has been disabled...
Check the .net framework installed on the machine and update it, if required
Also, Let us know the exact OS that you're using?
Thanks,
Mandeep -
Portal error message "Graphic rendering problem"
We just built a new portal system on Window server. A user login and get this error message "Graphic rendering problem". Would someone know what it is ? Thanks !
Check that the IGS is running properly...
Also check SAP Note: 704604
Regards
Juan -
can't get words to open. I have no other applications open, but every time I tap the icon I gat an oops error message that a problem has occurred. ***
First try killing Words. When on the home screen double press the HOME button, then swipe the screen image of Words up to close it.
Next, reset your iPhone by holding HOME and SLEEP until an Apple logo appears. If the problem is not resolved delete the app from your phone, reset the phone again, then reinstall the app. -
I am having a problem opening pdf files. I get an error message saying
a problem has occurred with the licensing of this product. Restart your computer and re-launch your product. If this problem still occurs after restarting ... error code:213:19Hi AdobeFiles,
I'm sorry to hear that you're unable to open PDF files. Please see this Help document: Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI for solutions.
Let us know how it goes!
Best,
Sara -
TS1717 ATH.exe has stopped working. How do I stop getting this error message and fix the problem?
I keep getting the error message ATH.exe has stopped working. How do I fix the problem so I don't the error message anymore?
There is a problem that Apple needs to fix (ha ha.. there are many but I digress) with ATH hanging after an ios device has been removed from the USB slot.
Re-inserting the device creates a new ATH instance which has some kind of conflict with the existing (hung) instance.
The solution is to end the process using CTRL-Alt-DEL and under processes there will mostlikely be two (or more). Kill them both, re-insert your device and it should sync OK.
Apple - please fix this (and the firewall problem) immediately. -
Error Message: "Printer Failure" Problem with print or ink system . . .
Greetings!
I wasn't exactly sure where to post this, but the error message refers to printer or ink system failure so I thought this was a good place. I've been troubleshooting my parents HP OfficeJet Pro 8600 AiO for the last 2 or 3 hours with little success. I've contacted HP tech support but they wanted $200 for the work to be done and neither I nor my parents, who are retired and on a fixed income, have the money to spare.
The tech support people said it was probably a problem with the drivers, so I attempted to reinstall the software, but that didn't help at all. A brief description of the problem might shed some light on this awful situation. Since this morning, my father tried to print something and the printer itself gave the following error message on the front LCD panel on the device itself (ie, not on Windows, but on the printer's display):
"Printer Failure
There is a problem with the printer or ink system. Turn it off, then on. If the problem persists, contact HP."
Obviously my first course of action was to follow the directions. I turned it off, unplugged the cord, waited approx. 30 seconds, replugged it in and turned it back on. Nothing changed. I've also tried removing and replacing the Ink cartridges, checking the tray for a paper jam or shortage and performing a rain dance in the hopes of attracting the gods' attention xP. In short, I'm at my wits end and don't know where to go from here.
I'm unable to access the device's LCD display control panel, which controls the printer, as the error message cannot be closed. I've tried restarting the PC as well, and a lot of other basic deductive troubleshooting procedures to no avail (forgive my overuse of cliches).
Any help would be appreciated. Thank you very much in advance. I wish you all a great day, and may the god of printing protect you from the same situation. I can assure you it's most unpleasant.
Regards, Sean (frosztbyte)
P.S. I'm not sure what other information might be needed in order to help me, but ask and you shall receive any I can find.Hi frosztbyte,
I understand your parents have an OfficeJet Pro 8600 that is saying it has a printer failure, that you have thus far not been able to clear, despite your best effort and a rain dance (at least I know who to blame for the rain now ). I would be happy to help you as best I can!
The first thing I'd suggest you do is plug the printer directly to a wall outlet if it isn't already plugged to one, just to ensure the printer is getting all the power it needs to function properly. If that doesn't seem to change anything though, please have a look through this A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document (it was steps for the same error without an error code as well) and hopefully it can help resolve the issue.
If the issue persists after trying the wall outlet and that document I would advise you try call HP again. I believe the number you called previously may have not have been HP, but another company. If you're in North America just call 1-800-474-6836, and if you're anywhere else have a look at this Contact HP Worldwide page to see what number to call for your area.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
ITunes store won't display open. No error message or connection problems.
For the last few weeks I've been trying to access the iTunes store but it will not open. I click on "iTunes Store" but it just shows me a blank screen. It seems to load it judging by the bar that displays the song information but it just doesn't show any content. It also does not give me any type of error message nor does it have any problem when I go to sign in and view my account information. The problem is only on iTunes, my App Store works perfectly fine. No matter how many times I try refreshing the page it just shows me the same blank page. I have tried re-installing itunes multiple times with no results.
Here is a picture of what I see when I try to open the store:This article has some tips
http://support.apple.com/kb/ts1368
(particularly under Troubleshooting on a Mac)
If that does not help... As a test, to narrow down the cause, you may want to create a new user account in System Preferences Users & Groups pane. It can be Standard or Admin. Log out and log in to the new user account (do not use Fast User Switching).
Try running iTunes from the new user account, and accessing the iTunes Store.
If the problem does NOT occur in the new account, the cause is likely to be something in your primary user account. For example, it could be user preferences settings, or something related to your iTunes library, or a background process that runs in your account that is interfering somehow.
If the same problem does occur in the new account, the cause is likely to be related to the overall OS, the iTunes application, or maybe network settings that block access to the iTunes Store.
Either way, you'll be able better focus additional troubleshooting. -
Yeh I was getting the Unknown Error message (-48) on my itunes for a while and the only fixes on here were long and complicated and involved wiping the ipod. Well all I did was repair the ipod on disk utility and they never appeared again. Not sure if this has been put forward at all yet but just thought people ought to know.
Alex xxOut of curiosity, did you have to put the iPod into Disk Mode first or does Disk Utility see it when plugged in even if using Auto Update and "Enable Disk Mode" unchecked?
Patrick
Maybe you are looking for
-
Reset Printing System does not exist on my computer!!!
I have been trying to get my HP PSC 2175 to print and working with HP support to do this. It just prints out blank pages. The last thing they sent me was to Reset the printing system using the Printer Setup Utility. And they sent me to the below link
-
Both Lightroom 4 and 5 won't open. Help Please.
I tried installing lightroom 4 on two different pcs. Both running Windows 8 32bits. When the installation is done, I try to open it. LR does shows up in the "dock" on the bottom of the screen, but it doesn't open. If I put the arrow/mice on it, it sh
-
Camera quality of my nokia 5800
i have nokia 5800 quality of cam is 3.2 megapixel resolution 2048 * 1536 when i entered nokia website and compared it with nokia e66 i found that they have the same camera quality but in fact 5800 camera quality is very very bad in compare to nokia e
-
Change the Finder search default to Find by Name (search by file name) rather than Find by Content
I just discovered another way to set the finder Find option to default to "find by name" (search by file name). I'm using Mac OS X 10.8.5 Mountain Lion. I'm not sure if this works on other OS versions, but it probably does. Here's a step by step: #1:
-
Access to rsa1 in many clients
Hello gurus, Can i create in an instance bw, several clients with access to the transaction rsa1. I ask this because in rsadmina table (table intermandant), the field bwmandt is individual. When I connect to another mandant (exemple 810) and I test