Error message 1161, tried all recommended solutions by Apple.

Error message 1161, tried all recommended solutions by Apple.
For about 3 weeks, my iPod would retain charge when plugged in, but wouldn't charge. Just today, I used it until the battery completely drained, and it started to restore when I plugged it in, but then I got this "Unknown Error 1161". I tried all of the recommended solutions by Apple, and it didn't work. I downloaded the newest version of iTunes, I restarted my computer, used a 2.0 USB port, nothing works. Please help.

Is it possible you're using a case-sensitive file system on your new mac?
Can you make sure you've got the latest version of Adobe AIR installed?
http://get.adobe.com/air/
Also, you may want to try joining the muse prerelease program at museprerelease.com
The new beta version is unlikely to have this problem.

Similar Messages

Get error message after trying all the fixes

My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
An unexpected error has occurred. Check OK to close program, and then try the following:
--restart the program
--restart the PC and then try again
--reinstall the Photo and Imaging software and try again
I tried all these - and downloaded new software after uninstall of old.
Still getting error message -- any suggestions please?
Thanks in advance.

Hello golden1, and thanks for the reponse!
I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred which is found on http://hpanswers.blogspot.ca.
Step 1:
-In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
Step 2:
- In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
- Go to Shell Hardware Detection, right click, and select properties.
- Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
- Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
Step 3:
If you if you are using downloaded software instead of the printer CD:
-Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
-Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
-Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
If you are using the printer software disc, follow these steps instead of downloaded software:
- Go to the Start menu, and go to Computer.
- Double-click on the icon for the HP printer CD.
- Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
Step 4:
- Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
Step 5:
- Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred. You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/products/features/system-restore
If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can't connect to FaceTime on my new iPad 2. Error message when trying to enter my verified apple ID.

My new iPad 2 won't allow me to access FaceTime when I enter my verified apple ID. I have tried all the methods mentioned on the forums & Internet and nothing works. I bought the iPad to FaceTime with my nephew overseas. Such a disappointment :(

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

HP Photosmart P1100 won't feed, rollers not turning, tried all recommended solutions.

All other functions appear to be working normally. Here are the symptoms when I use the print test page function:
The print head moves back and forth making all the regular sounds when it prints a first page but no paper is feed. The rollers never turn. The Out of Paper and Load Paper and Press OK messages appear. When I press OK the same thing happens again.
By trial and observation I surmise that a small black plastic ‘lever’ on the left side is not being engaged (pushed back). The print head mechanism blocks it when it moves to the left side so I can’t see it. I removed the duplex unit and was able to easily move the rollers up or down. If I push back on black lever mentioned above and turn the rollers up they move with some difficulty and paper is fed while a black bar at the front of the rollers goes down and snaps up.
I rely on my HP printer and I believe in fixing things that can be fixed rather then throw them out and add to landfill and environmental problems.

HI, not to sure as its a somewhat older unit i havent seen in a long while. But i have found data on it.
HERE is some Troubleshooting.
And some more HERE.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

B110a black in still not working after trying all recommended solutions

Hi there
Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a. Be sure to check the vents as shown in solution six, step three. If the above does not resolve the problem the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HT201318 I keep getting an error message when trying to purchase asdditional icloud storage. All information is up to date.

I get an error message when trying to purchase addtional icloud storage. All of my credit card and account information is up to date.

This behavior was described here many times.
Apple delivered a technote about that.
Go to my public BOX (address below)
Download :
public_YK›
for_iWork'09›
other_iWork'09 items ›
uninstall iWork '09.zip
Expand the archive then run the script.
After that, reinstall the application (or the entire package)
If you bought Pages thru the Mac App Store, there is no need to pay one more time.
Yvan KOENIG (VALLAURIS, France) jeudi 26 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

TS3694 I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iP

I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iPhone. Please help.

What version of iTunes are you using? The error you references seems to be connected with iTunes 9.0.4. That version of iTunes is not compatible with iOS 6. You need to update to the current version of iTunes.

Getting error 107 downloading after effects. Have tried all suggested solutions

Need assistance with downloading after effects trial as I keep getting error 107. Have tried all suggested solutions. Thanks

It isn't the installation of the Adobe Download Assistant which can cause this problem it is where you select to download the install files too. The Adobe Download Assistant would be installed to your Program Files/Applications folder and install files would be downloaded to your user folder, by default, or your desktop.
Alternately you can intitate a direct download by following the steps listed at http://forums.adobe.com/thread/981369.

HT201272 Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error... I have tried all possible solutions i found on internet...my restrinction

Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
Any advice?
thanks in advance

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I can't download itunes to my windows 7 computer. It gives me a error 0x800736fd. I tried all the troubleshooting that apple recommends online. What else can I do?

I can't download itunes to my windows 7 computer. It gives me a error 0x800736fd. I tried all the troubleshooting that apple recommends online. What else can I do?

Hi there AAA87,
Welcome to Apple Support Communities.
It sounds like there’s an issue downloading iTunes on your PC, even after trying some recommended troubleshooting suggestions. I’m not sure which suggestions you’ve tried, so if you haven’t already, try the troubleshooting suggestions in the article linked below.
iTunes: Downloading iTunes for Windows using Internet Explorer - Apple Support
Good day,
-Jason

HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Ghost Excel workbook opens each time I start excel and prevents formulas - tried all suggested solutions without luck

Hi
When I start excel and open any workbook a 'ghost' work book opens it doesn't contain cells and is just greyed out. When I am working on a document whenever I start to write a formula the ghost wbook opens and I cannot see the original document to complete
the formula. If I open multiple workbooks I sometimes get a ghost workbook for each doc that is open - after a while I get error message to say not enough reources to do even simple tasks like save work or open a document.
I have posted on several forums and tried all suggested solutions without luck - this is really preventing me from using excel which I need daily. Personally though I am only intermediate user I think it may have something to do with a workbook that I downloaded
that had macros in it but I cant be sure
Any help greatly appreciated
Thanks
Dave

Hi Dave,
First make sure have installed the latest update. Second, we can repair Office 2013 from Control Panel > Programs and Features. Third, open Excel 2013 in safe mode, if it works fine, disable some 3rd-party application add-ins.
Could you please share a screenshot of this “ghost” workbook and upload it to OneDrive? I’ll analyze it in detail as soon as accessing it.
If there is anything about this issue, don’t hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support
teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office programs.

Error message when trying to sync calendars

I'm receiving the following error message when trying to sync my calendars only: "Invalid response received from .mac. Could not complete syncronization. Please try again later." I have no problem syncing Mail, Bookmarks, etc...
Does anyone knkow the solution to this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message when trying to update my world or anyof my applications

I receive an error message when trying to update any of my applications. Example facebook, my world..etc...
Error 40820 try later

Hi and Welcome to the Community!
While normally it is much more accurate to search with the accurate and complete error message, including all punctuation and error codes, in your case here is a KB that discusses that error:
KB28188"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again. (Error id: 40820) " error is displayed when opening App World on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error message 1161, tried all recommended solutions by Apple.

Similar Messages

Maybe you are looking for