Error message 1415 with black screen on my Nano, error message 1415 with black screen on my Nano

Anyone know how to fix this issue?

If you had a Kernel Panic when you navigated to /Library/Logs/DiagnosticReports you would have seen a folder for KP's. You didn't see one therefore no KP which means something else is going on.
If you want to do an erase and install it's not very difficult however before you do make sure you have a viable backup. My recommendation is either a Time Machine backup or even better create a bootable clone using Super Duper or Carbon Copy Cloner. IMHO it's wise to have redundant backups in the event one fails. Personally I use TM and SD on two separate external HD's.
To answer your question yes you can erase and install from teh orginal OS X Install DVD that came with your computer. If your machine orignally shipped with 10.5.x (Leopard) that is definetley the correct DVD to use. How you do is fairly simple:
With the DVD in the SuperDrive re-boot, when you hear the startup tone hold down the Option key and choose the DVD.
Choose the language then select the Utilities menu and open Disk Utility. In DU select the HD on the left then select the Erase tab, make sure the Format says "Mac OS Extended (Journaled) and then click Erase. This will totally wipe everything off your HD!!!!
Next exit Disk Utility and continue with the Install and as mentioned in my first post use the Setup Assistant guide to help you install and restore your data from the backup.
Assuming you don't have a hardware issue your system should work OK. If you still have a black screen you probably have a hardware issue and should take the machine to an Apple Store or AASP to have it professionally diagnosed.

Similar Messages

I am going through startup on Macbook Air 11. When I get to the "Sign in with Your Apple ID" screen, I keep getting the message, "Couldn't sign in because of server error." I am connected to wifi. Any ideas on how to proceed?

I am going through startup on Macbook Air 11. When I get to the "Sign in with Your Apple ID" screen, I keep getting the message, "Couldn't sign in because of server error." I am connected to wifi. Any ideas on how to proceed?

Hello KathyBrust
Check out the article below to go over a few troubleshooting steps with issues connecting to iCloud. If you are still stuck, there are other resources to get a resolution.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
-Norm G.

Hi - I was updating the operating system on my I-Pod touch (to Ios 5). After the download finished an error message re my touch came up. The Ipod has frozen, with the apple icon and an empty bar on the screen. I can't hard reset. Help!

Have checked and have the latest version of I tunes.

What did the error message say? The following lists the common error messages and their resolutionL
iTunes: Specific update-and-restore error messages and advanced troubleshooting
For your immediate problem,:
- Try placing he iPod in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Last, let the battery fully drain. Then cahrge and try agin.

I recently updated my iPad and when I went back to read a book that I had purchased now I'm getting an error message where whole chapters are missing. I tried re-syncing with my mac book and no luck. Any help to restore my book?

I recently updated my iPad and when I went back to read a book that I had purchased I'm getting error messages and whole chapters are missing. I tried re-syncing with my mac book and nothing changed. Any help to restore my book completely?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, you'll need to do a time-consuming "Restore."

I have a Lexmark x5150 printer, getting error message Prop Res DLL not located when trying to print, just in Black. Contacted Lexmark, determined the Problem is Firefox 4.3 doesn't support this feature, although my browser internet explorer does.

I print shipping labels through Paypal, I want to print just in black ink, but when I use the Lexmark properties to change the printing to just black, getting message Prop Res DLL not located. Spent some time with Lexmark Chat to try and find out what I needed to do to fix this. As they walked me through a couple of things to try, one was to go to Internet Explorer, found I could do the necessary printing, with no problems of getting that error message. So it appears the problem is with Firefox 4.3

See this thread: <br />
https://support.mozilla.com/en-US/questions/816333?s=Prop+Res+DLL+not+located&as=s
Surprising that Lexmark wasn't aware of a problem with their drivers that is not exactly new, or restricted to Firefox. <br />
http://support.microsoft.com/kb/918730 <br />
http://www.proz.com/forum/office_applications/30138-error_message_prop_res_dll_not_loaded_in_word_how_can_i_fix_this-page2.html <br />

HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

HT201407 I tried to restore my iphone 4, but error message came up and now my phone is just has a blue blue screen and nothing else. what do I do?

I tried to update to IOS6 and then it asked me to connect to itune. The I got an error message when I restore my phone. right afte the phone crashed. When I tried to restart the phone with pressing the button on the top and the navigating botton for a few second, all came up was a blank blue screen. Please help!

You said: "I looked up 1611 and it says a bunch of random things that have nothing to do with my problem."
Why do you think that?
From that search, did you read: "
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service."
Did you follow the troubleshooting security software issues article?
ot this one:
iOS: Resolving update and restore alert messages

Macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple,

macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.

HT4623 I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

Frequent freezes with black "you need to restart" error box

Since installing Tiger I get frequent freezes along with an unfamiliar error message that reads "you need to restart..." In addition, I often find this has happened when the computer has been asleep; I'll enter the office to find the computer making a loud 'racing' noise, the power supply and fan sound like a car being driven at 60 mph in first gear....
When I installed the OS, I also attempted to update the firmware but wasn't able after seveal attempts to determine if the firmware was infact updated: saw no progres bars, no long whining tone as per the instructions...
Are thesse issues related? Any ideas?

Hi tbfa,
These articles might help:
Mac OS X: What Is a Kernel
Panic?
Mac OS X: How to Log a Kernel
Panic
Kernel Panics? Don't panic
too!
Mac OS X Kernel Panic FAQ
Gulliver,
the FAQ suggests that I might start with upgrading firmware, which n the last couple of 'softwre updates' I have been prompted to do. But in trying he procedure, I don't seem to experience what the update instructions describe: I click shut down, I press and hold the power button, trying both the keyboard power button and the one on the face of the tower itself, and I hear no long tone, nor blinking light on the front. Instead I get a black window which welcomes me to Open Firmware with instructions as to how to boot or shut down....no status bar, no alert as to when the firmware has been updated...
Is there another way to update he firmware....?

HT201444 My iphone 6 screen suddenly turned red and collapsed into a black screen, I can't restore or reset it, error 4013 appears on itunes

Last week I bought my iphone6 and today, when I was using it, a red screen appeared and it collapsed into a permanent black screen with an apple in the middle... I restarted it a few times and tried to connect it to itunes and restore it, but it doesn't work, it starts the restoring process but after a while it fails and error 4013 appears on my Mac's screen. I don't know what to do, please help me I really need to use my phone right now.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.

https://support.mozilla.org/en-US/kb/cannot-send-messages

Why is it that when I go to the search screen to find a particular message in a conversation it comes up with the message but when I click on it it takes me to the conversation where the most recent message was sent and not the message I wanted

Why is it that when I go to the search screen and type in a particular message I want to view, my iPhone finds it but when I click on it it only takes me to the conversation at the most recently thing texted and not the particular message I clicked on?

Never occurred to me you can search messages that way, thanks.
Another way to do it is to scroll from the most recent message to the top of the screen and tap load more messages, repeatedly till you reach the one you want.
I like your method better, but with both methods it refreshes to the most recent message.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Error message 1415 with black screen on my Nano, error message 1415 with black screen on my Nano

Similar Messages

Maybe you are looking for