Error message 1602 whilst trying to restore Apple TV

I have a rapid flashing white light on Apple TV and have seen various comments saying that connecting ATV to my Mac with micro USB and restorign ATV via iTunes will correct the problem. Have tried this but get after trying to verify restore I get failure message with "Error Code 1602 (unknown)". Has anyone else had this problem and found a solution pls?

See here  >        Check USB connections

Similar Messages

  • My iphone 3gs brings error message 1602 when trying to restore

    My iphone 3gs brings error message 1602 when trying to restore factory default

    See here  >        Check USB connections

  • Error message 3014 when trying to restore ipod touch

    error message 3014 when trying to restore ipod touch, i have tried everything, any suggestions?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Error message 1 after trying to restore iPhone 4, after upgrading it to iOS 5

    I keep getting error message 1 after trying to restore my non-jailbreaked iPhone 4 after trying to upgrading it to IOS 5. The phone only displays a picture of the iTunes logo and a USB cable. I have tried everything  I could find on the internet such as holding the homebutton while connecting the phone to iTunes, restarting the computer, switching computers, restore with another cable, take out the simcard etc. It works fine until the verry end, that's when I get the message. Please help!

         Try downloading the 3rd party application called "Tiny Umbrella". While it isn't a software distributed by Apple it will be able to kick your iPhone out of the boot loop.
    Mac OS X download, click here.
    Windows XP/Vista/7 download, click here.

  • TS3694 What does it mean when I get error message 3194 while trying to restore my ipad?

    What does it mean if I receive an error message 3194 while trying to restore my ipad?
    I received this message after connecting my ipad to itunes.  There is a display of a cord connecting to itunes which is initially why I was alerted to connect my ipad to my itunes account on my laptop.
    Any help is appreciated.

    Turn of any firewall or antivirus software.

  • Loading the latest OS on my iPhone4 caused the phone to freeze. I get error message 4013 when trying to restore the phone. Any help will be appreciated

    Loading the latest OS on my Iphone 4 caused the phone to freeze and stop working. I get error message 4013 when trying to restore the phone.

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?

    I'm getting an error code 9 when trying to restore apple tv 2 thru iTunes any suggestions?  the error comes up when itunes tries to verify the update.  I hook the apple tv back to tv and says I need to connect to itunes.  the original problem was the power went out and the apple tv light kept blinking.  I tried restarting it but would not work.  Any Suggetstions?  Thank you.

    Try again tomorrow.  All Apple servers are undergoing a huge number of hits.  I think tomorrow or even the next day, all upgrade and activation servers will be in better shape.
    Any time millions of people want to do exactly the same thing online, there's always trouble, LOL.

  • IPod Touch stuck in recovery mode, error message 1611 when trying to restore.

    I bought a 2nd generation ipod touch from someone on CL and it appeared to me that it just needed to be plugged into the computer and be synced with itunes. But its stuck in recovery mode. When I plug it into my computer, itunes says it sees the ipod is in recovery mode and needs to be restored. Sout t I click on restore and it tries to restore it, but then it stops in the process and gives me error message 1611. I looked up this error message and it has to do with system security. I messed with my security settings and I still get this message. I tried using my home computer instead of my laptop and it still gave me the same message. Ive also tried holding down the power and home button for several seconds and it still goes back to recovery and gives me the same error message when I try to restore it. Also, itunes recognizes my ipod, but my computer does not.. Can anyone help me? Do I just have to bring the ipod into an apple store and have them figure it out? Thanks in advance!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Have you tried what is in bold

  • Get error message 1603 when trying to restore mini

    Hello,
    am getting error message 1603 while attempting to restore Ipod mini using latest version of iTunes.  Running Vista totally updated.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • Unknown Error Message (9) When trying to restore Ipad 1

    Hi, recently i purchased an iPad 1, and am having problems when trying to restore the device. I put it into restore mode as it was going to sync every app on itunes which i didn't want, so i had to try and set it up as a new ipad again. Now the ipad is in restore mode, when plugged in to my laptop, iTunes does not recognise the iPad until i put it into DFU mode, by holding down the home button and Power button simultaneously, then releasing the power button until the 'connect to itunes' symbols appears. iTunes then recognises the iPad in restore mode and asks me to restore it. When i click to restore, it always stalls just after the 'waiting for iPad' message appears on iTunes, then the error 'Could not restore Ipad, an unknown error occurred (9)' appears.
    I have tried downgrading my firmware and restoring my iPad to v3.2 but then the error 3194 appears. Also by trying to restore the firmware to the newest version using a downloaded firmware also returns this message. After some research on the matter, i read a few people claiming the problem is the USB ports. I have since tried restoring on another laptop and a PC, but still the error 9 message occurres, therefore suggesting it isn't a problem with the USB. My understanding it that it is either a problem with the iPad, or with the Firmware i have downloaded, and iTunes does not recognise this. As further information, the iPad is a first generation ipad which had the latest firmware updated on (v 5.2). It seems to be whenever i try to restore to a firmware i downloaded seperately, i get the error message 3194, and when i just click the restore button, and automatically updating to v5.2 i receive the error 9 message
    Any suggestions as to how i can fix this problem?
    Thanks

    i pulled this from another post on these forums.
    thy this:
    "First try to turn off your iPhone, with the sync cable not plugged in.
    Then hold down the home button (iPhone still off) and plug in the sync cable. (Keep holding the home button until iTunes pops up).
    You have now entered force recovery mode.
    Now try to update the iPhone, using iTunes, as instructed.
    That should work. "
    From: https://discussions.apple.com/thread/2668731?start=0&tstart=0

  • HT201269 error message 3 when trying to restore iphone5

    I have been trying to update my phone to ios7 software and it wouldnt complete and afterwards i could get no service on my phone. I then had to restore factory settings on phone but after numerous attempts the phone would not restore and kept saying eroor message 3 phone could no restore . Has anyone else had this problem?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3694 I got error message 1015 when trying to restore settings on iphone 3g any suggestions?

    Can Anybody help me here?  I tried to update the operating system, via Itunes,  on my (second hand) iphone 3G and an error message came up.  I then tried to restore but to no avail.  I got another error message (1015).  I am now unable to use the phone at all.  Any suggestions would be greatly appreciated.

    I did search to try and find a solution.  As yet no luck.  Someone a little more technically minded might be more successful.  However, I haven't given up.

  • TS3694 I keep getting this error message 3194 when trying to restore my ipod. Pass code has me locked out and am trying to restore

    I am locked out by the pass code and am trying to restore, I keep getting this error message 3194 . PLEASE ADVISE !!!

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • Is my iPod toast?  Error message 1430 when trying to restore.

    I connected my ipod then it said it may be corrupt and should restore...uploaded latest itunes and tried to restore but received error message 1430...now my computer doesn't even list it in devices...What should I do?

    See here  >        Check USB connections

  • TS3694 getting error message 3194 when trying to restore iPhone

    Trying to restore iPhone after iOS7 failure and getting 3194 as error message.
    Any ideas please?

    See:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

Maybe you are looking for

  • Do I need to activate my Verizon iphone 5 before I use it in Europe?

    do I need to activate my new unlocked Verizon iphone 5 before I take it to Europe? Do you know if there are any limitations on how many times/countries I can activate a gsm card? is LTE going to work as far as there is the right sim each time? Thank

  • MIRO for delivery charges (Customs duty) in Imports

    Dear gurus, We have very strange problem, Scenario:- Invoice verification of delivery charges of imports P.O. The entries are Vendor Acc. Cr                 Custom Clearing Dr. But in some cases the entries are coming as Vendor Acc Cr. Custom Clearin

  • Please cancel my auto-renewal

    Basically, it was a good deal when I couldn't afford Photoshop and Lightroom, but now paying $600/year (and rising I assume) for the rest of my life to Adobe doesn't sound very viable either. I love Adobe products but unfortunately I'll have to jump

  • Using and external burner

    Hello, I need to burn many copies of a DVD and wonder what external burner would work with iDVD and my MBPro so that I can save my MBP drive from wear and tear. If that is even possible? Thanks, Al

  • /usr/ccs/bin/ld: Unsatisfied symbols: while compiling PRO*C

    I have a PROC*C program that I am trying to compile and I get this error: /usr/ccs/bin/ld: (Warning) At least one PA 2.0 object file (daemon.o) was detected. The linked output may not run on a PA 1.x system. /usr/ccs/bin/ld: Unsatisfied symbols: line