Error message -3001 when I try to install updates

When I try to install updates, I get error message: update Quick Time can't be saved. A network error has occured. Cannot open file -3001. Make sure you can connect to the internet, then try again.
My IMac has also been very slow to start up. The white screen stays on for several seconds before it finally turns on.

Hi Sharon,
/*Component Manager & component errors*/
  validInstancesExist           = -3001  This component has open connections.
Not much help, but let's work on the slow startup first.
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.

Similar Messages

  • Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

    Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
    This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
    But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
    By the way I got an Satellite M70 - 168 laptop.

    Hi
    Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
    Found this useful knowledge base article:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
    This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
    But dont worry buddy. The Google search engine is the key!
    Try to search for this KB835221 patch and Im sure you will find the right one!
    The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
    PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
    Good luck!
    Message was edited by: Jayjay

  • I get an error message 1316 when I try to install adobe 9.3, why?

    I tried to install adobe reader 9.3
    several times. Each time I get an error message
    that reads: error 1316. A network error occurred while attempting to read from the file C
    Documents and settings.  Why? How do I fix this?

    You may have an earlier Adobe Reader installation that got corrupted.
    Remove all previous Adobe Reader installs using the Windows Installer CleanUp Utility, then try installing 9.3 again.

  • Error code 1321 when I try to install update  in Windows 8.1

    I can find a solution for that error code on Adobe web site, however it only covers up to Win 7.  It says I need to update user permissions and I am not sure how to do it in Win 8.1 .
    Perhaps Adobe could add a "Update user privileges in  Win 8.1"  to the solution

    Please refer to :
    Error code 43 when i download creative cloud ver 1.7.0.413
    Getting error 43 when trying to update Creative Cloud.
    They have important instruction.
    Regards
    Rajshree

  • TS4009 I get error message 2349 when I try to install iCloud, what do I need to do?

    How do I fix this?

    I used Migration Assistant to migrate the applications to the new laptop which is a 3rd computer.
    Forget that part. The apps won't work. Adobe apps must be installed properly. That may well explain your issues with CS6, too. Generalyl, though, there is no need to uninstall older versions...
    Mylenium

  • The following error message appears when I try to create a PDF in Publisher:

    The following error message appears when I try to create a PDF in Publisher:
    PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-install Adobe Acrobat 10.1.
    I have tried update patches to no avail.
    Can anyone please help?
    Thank you.
    Susan

    Hello Michael,
    My version of Publisher is 2010 and my OS is Windows 8.1.
    64-bit OS x64 based processor.
    I'm not too sure if this issue has arrisen when I upraded to Windows 8.1.
    My Dell printer(Dell all in one) has also stopped working due to a driver issue now not being supported.
    Thank you for taking the time to view my request.
    Kind regards,
    Susan

  • HT1338 when I try to Install Updates I get an error massage. Can anyone help?

    When I try to install updates I get an error message " an unexpected error has occured" This involves: Epson Printer Software update 2.11; iTunes 10.6.3; Airport Utility 5.6.1; Remote Desktop Client Update andd Java for Mac OSX 10.6 Update 9. I also have purchased OS X Mountain Lion and have the same problem. Any suggestions?

    Try downloading from here:  Download Photoshop Elements products | 13, 12, 11, 10
    FYI this is the Photoshop section, Elements questions should be asked here: Photoshop Elements
    Benjamin

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • I am getting an error message -41 when I try to send my project to IDVD

    I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

    Hi
    The Error -41   mFulErr  Memory full (open) or file won't fit (load) - means that memory is full
    Memory can be more than one thing
    • RAM - usually is enough and rarely give this error
    • Start-Up Hard disk - is TO FULL - very common origin to this signal
    • Other hard disks - Usually do not have any thing to do to this
    So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
    My minimum is 25Gb free space and especially if iDVD is to be used.
    This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
    Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
    Yours Bengt W

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

    I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
    Operating System is Windows 2008 R2 64 bit

    Hi JamesRead,
    According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
    you must have administrative rights on the computer.
    There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
    prompt and check if it can install successfully.
    You can prepare an installation of database engine instance to include product update:
    setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
    For more information, you can review the following article about installing Updates from the Command Prompt.
    http://technet.microsoft.com/en-us/library/dd638066.aspx
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

    I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

    Hello, not too helpful, but...
    enum {
      paramErr                      = -50,  /*error in user parameter list*/
    Usually means a bvad or unacceptable Charachter in a File or Folder name...
    http://support.apple.com/kb/TA20831
    Solving Trash Problems...
    http://thexlab.com/faqs/trash.html
    Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

  • "The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?

    Dear Lawrence Finch: 
    If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
    "The iPhone software update server could not be contacted."
    No, I did not hack anything (are you kidding?  Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB.  Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
    Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
    Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with: 
    1.  OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]).  So that can't be the problem.
    Here's all the other things apple & others say to check which I already checked:
    2.  USB ports are FINE, both work FINE, so that's not the problem.
    3.  No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
    4.  No "usb hubs."
    5.  Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]).  If you know of a newer one for this OSX, please advise.
    6.  No antivirus software.
    7.  No security software.
    8.  No routers; only 1 comcast modem, period.  Wired Ethernet.
    9.  No wifi gadgets, no wifi at all.
    10.  No firewalls, except what is on iBook in the SHARING/System-Prefs. section.  It's turned OFF.
    11.  Did the hosts/terminal thing sudo nano whatever it was.  There were only 3 lines, NO gs.apple.com:
    xxxxx local host
    xxxxx broadcast host
    xxxx local host
    Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
    So that's it.  If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
    Many thanks!

  • Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates.

    Hi, I keep getting the following error code : U43M1D207 when I try to install the latest updates. Im trying to load the RAW conveyors for the Nikon D810 but so far pretty well frustrated.
    Any help would be greatly received.......
    Regards
    Apple

    Can you please try the solution suggested at error code U43M1D207 ?
    Thanks
    Andaleeb

Maybe you are looking for