Error Message 4621 when trying to burn a playlist

I am running Windows XP and Itunes 10.4. I haven't burned a playlist to a CD for about 5 years and the last time I did, there was no problem. I imported one of my purchased CDs into Itunes and all songs play fine. The CD has since been damaged and I was trying to burn the songs onto a CD. I'm using Maxell CD-R discs. After about 30 seconds, I get an error message 4621 saying that my attempt to burn failed. I am using a Dell XPS 400 and my E drive is HL-DT-STDVD+-RWGWA4164B. I haven't updated drivers in a while, but the drives work fine and play the CDs. Does anyone have any suggestions on how to fix this problem?
Thanks
Kelly

I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
Jeff Underwood
<Edited by Moderator>

Similar Messages

Error message 4850 when trying to burn a playlist to disc

I have recently upgraded my laptop to a dell E6500, and have downloaded the latest version of itunes. Since I have had this new laptop, and new version of itunes, I have been unable to burn discs from playlists. It starts to write a track, and then i get an error message "4850". Can anyone help me with this? Ive seem some other people saying they have had this problem, but im not v conputer savvy, and dont always understand their technical response
Thanks

I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
Jeff Underwood
<Edited by Moderator>

Keep getting error message 4310 when trying to burn music onto CD? How can I fix this for free?

Keep getting error message 4310 when trying to burn music from playlist onto CD. How can I fix this for free?

You can use the email form here > Apple - Support - iTunes Store - Contact Us
iTunes Store & Mac App Store: About your Apple ID and password

Error message 4000 when trying to burn a cd in itunes

I am having problems burning a cd in itunes. I am getting the error message the attempt to burn a disc failed. An unknown error occurred (4000). Can someone tell me how I can fix this problem. Please note that I have looked up other ways to solve problem and have tried them and none of them seem to work. Such as in program files I clicked on repair and not uninstall to see if there was any possible corrupt itunes files to be fixed. I changed the burn speed and that did not work. The only thing I did not do was a total uninstall of itunes. I need to know should I do that and if so what site will I need to go on to re-install itunes and will I have to pay for it? My computer which is Windows XP already had itunes on it when I bought it so I do not want to pay for itunes. So can someone please give me some guidance regarding this matter. And please note that I was able to burn cd's in itunes before and then it just stopped working. And I have tested my computer with the windows media player and I was able to burn music from my music library so I know my problem is with itunes.
Thanks!

I had this issue to when trying to burn discs recently. I went into the CD creation settings in iTunes and I "unchecked" the option to "Include CD Text" and after I did that, the disc I had been trying to burn several times with error, actually burned without fail. Give that a try and see what happens.

Using Windows 7, I get an error message 4310 when trying to burn a CD from a playlist. I ran diagnostics and everything was ok. Please help. Reading previous posts haven't helped.

I have read all of the other postings and they haven't helped.
When I ran diagnostics here is what I got:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron 5720
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0015B7001238F790
Current user is not an administrator.
The current local date and time is 2013-08-11 10:02:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics 4000
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2a1c5ee63a68f4be6bc96c5266eed869
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: iaStorF (11.5.0.183),
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   PLDS DVD+/-RW DS, Rev
Audio CD in drive.
Found 11 songs on CD, playing time 42:48 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:52:30
Track 3, start time 06:59:54
Track 4, start time 11:40:47
Track 5, start time 15:15:38
Track 6, start time 19:31:39
Track 7, start time 22:52:55
Track 8, start time 26:38:36
Track 9, start time 30:28:61
Track 10, start time 33:35:27
Track 11, start time 38:20:39
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   8 16 24 32 40.
The drive CDRW speeds are:   8.
The drive DVDR speeds are:   8.
The drive DVDRW speeds are:   8.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DS on CDR media at speed 24X.

Hello Princess Lynne Anne,
Thank you for using Apple Support Communities
First I recommend taking a look at this article named iTunes: Music purchased from iTunes Store cannot be burned to MP3 format CD found http://support.apple.com/kb/TS1476.
Songs purchased from the iTunes Store may either be in AAC format or AAC Protected format depending on when they were purchased (older songs used AAC Protected format). You can convert AAC songs to MP3 format allowing them to be burned to an MP3 format CD, however AAC Protected songs can not be converted. You can, however, back them up to a data CD or DVD, or you can burn them to an audio CD (which can be played in a CD player).
And if your issue still persists after converting any of these purchases, then I would recommend this part of the article named Disc Burning Quick Assist found here http://support.apple.com/kb/HT1152#learn2:
Top troubleshooting tips
In addition to the following tips, check out these articles:
Solving problems with burning discs
If the disc burning options are dimmed or unavailable
If a burn does not succeed, check the disc or try another disc
Eject the disc from the drive and inspect it to see if the surface is dirty or scratched, or if it already has data written on it (the shiny surface is slightly darker where data has already been burned). If it's dirty, wipe it clean with a soft, damp cloth and try burning again. If the disc already contains data, try another disc. If you're using a rewritable disc that already contains data, be sure to erase it before burning data on it again. Small flaws or surface inconsistencies can cause an unsuccessful burn. Try burning your content to another disc or try a different brand of disc (if possible).
Make sure that your optical drive can record discs
If your drive is built into your Mac, make sure that you have at least a Combo Drive if you want to burn a CD or a SuperDrive if you're trying to burn a DVD (or CD). Consult your Mac manual or your third-party manufacturer's disc drive manual for more information.
Check the disc type
Make sure that your disc drive is capable of writing to your media at hand. For example, you won't be able to burn a DVD+RW disc with an older Apple SuperDrive. Consult your Apple or third-party product manual for your drive's supported media specifications. You should also use discs that are rated for the burn speed of your drive.
Slow things down
In the Burn dialog, specify a burn speed that is slower than the maximum speed rating for your disc drive (if you can) and try burning another disc.
Free up some memory
If you've got other applications open, quit the ones that you're not using (or quit them all except for the one from which you're burning your disc). Allow the disc to burn before doing other things on your computer.
Check your hard drive's available space
When you burn a disc, your Mac temporarily sets aside an amount of hard disk space equal to the amount of data being burned to the disc. If you're burning a large amount of data, you may run out of room on your hard disk if it's almost full, which may prevent a disc from burning. To free up space, throw out unwanted files or back up files to an external drive.
Restart your computer
Sometimes a simple restart can resolve issues. Once you've restarted your Mac, try burning another disc again.
Update your software
Use Software Update (from the Apple menu, choose Software Update) to check for, download, and install the latest versions of your Apple software. If you're using a third-party burner, visit the manufacturer's website for the latest software updates for your model.
Check your connections
If you're using an external disc writer, make sure that all of your cable connections are secure and that the optical drive is powered on.
Cheers,
Sterling

Error Message (2131) When trying to burn a CD

I need help? When I go to burn a CD from my playlist and it is time to put the CD into the driver, It go threw the process of reading the cd and then it go to the download process an error message comes up An Unkown Error (2131) Does anyone know what this means, and how to fix the problem?? HELP

I had the same problem with Dell Vostro 1000. My problem was with TSScorp DVD+RW TS-L632H drive. I applied new firmware that lilmaqi posted the link to and it worked. Make sure you follow the instruction on how to apply the firmware fix.
http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&relea seid=R173097&formatcnt=1&libid=0&fileid=235346

Error message 4261 when trying to burn discs

Arghh, this is driving me mad. Since I updated to Itunes 11, I have been unable to burn playlists to disc. I'm a teacher and need to do this a lot for my work. I've wasted about 20 blank CDs as they start burning, then after a few tracks I get the message "Cancelling disc burn" and the disc is ejected with the error message 4261. I've tried changing the burn speed, I've unchecked the box about including CD text. Why is it doing this and more importantly, how can I stop it?
Can anyone help?

Please can anyone help me with this?

Error code (4880) when trying to burn a playlist to disc

I have never had a problem burning play lists to disc, before installing iTunes 8. I fact up until a few weeks ago burning was a breeze and was really fast. but now every time i try to burn a disc it starts burning the first two tracks and then says disc burning is canceling then ejects the disc and displays the error message: 'unable to burn disc. An unknown error occurred (4880)'
Has anyone any Ideas on how to solve this problem? It is starting to become very irritating.

I too have been having troubles burning DVDs from iTunes, in my case under Vista. I think this could be a re-run of an earlier iTunes problem when Apple took a sudden dislike to grammatical expressions such as '. Anyway, by trying to burn with other software I've found the error happens when iTunes tries to burn a track with either a very long name, or a track that contains an odd symbol. Just now a track name from Verdi's Aida was not only very long but also contained this symbol / and I got repeated Error 4850. Once I edited the track name to remove this (and shortened the track name for good measure) the problem has gone away.
Jeff Underwood
<Edited by Moderator>

Error Message 4880 when trying to burn

Just updated to latest version of Itunes and now I can't burn a disc no matter what I try, I lowered speed and went thru every thing I could think of, please help if you have any suggestions, gone thru 20 blank discs and really ready to give up, please any help would be much appreciated.

I'm having the same issues since the update. It's really frustrating.

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

I am getting error code 0x8002006E when trying to burn a DVD

Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

Keep getting error code -50 when trying to burn a disc. how do I solve this?

Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version. What should I do?

I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version. What can I do?

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

How do I fix the 4900 error I get when trying to burn a cd in itunes?

how do I fix the 4900 error I get when trying to burn a cd in itunes?

We are having the same issue.
Windows 7 x64
Microsoft Office 2013 (Word)
Adobe Reader XI (11.0.0)
Whenever someone tries to embed a PDF file into a Word document, the following error occurs:
The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed.
I have looked at alot of articles online that say to 'Disable' Protected Mode. This does not resolve the issue. This option is not set by default in our environment.
Do we have any confirmation or information from Adobe on this issue?

Error Message 4621 when trying to burn a playlist

Similar Messages

Maybe you are looking for