Error message 5.1.1 when trying to send an email
I am wondering if this is a problem on my end or the recipient's end? I try replying and sending a new email and I get the message "Mail server responded: 5.1.1. Recipient address rejected. User unknown in relay recipient table."
How can this be corrected?
Thanks.
Before I call in the troops and wake all server-personal I would take a second look at the address.
If copy/paste-ing you can get an extra " or . )
Even if most mailservers accept a mix of upper and lover case [email protected] some has to have it just their way, Often lover case.
And no extra , or ; at the end
Also if there is a list of addresses just one have to be corrupt to make the mail bounce.
Similar Messages
-
I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share". Just purchased the iPhone 6 plus. Never had this issue with the 5. Is there something that I need to change in my settings?
I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share". Just purchased the iPhone 6 plus. Never had this issue with the 5. Is there something that I need to change in my settings?
-
I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please
Try reentering the password in your iCloud mail settings.
-
Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.
What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive. You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed. Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM. Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html* -
I keep getting an error message saying, "cannot record" when trying to record over a slide in my presentation. No idea why. Any suggestions?
Thanksemail ituens at expresslane.apple.com and they will help you for nothing
-
HT201210 iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
iam getting a error message code of 3194 when trying to restore iphone 4 on itunes
http://support.apple.com/kb/TS3694
-
I am getting error message "the recipient was rejected by ther server" when trying yo send an email.
I am getting error message "the recipient was rejected by ther server" when trying yo send an email.
How do I fix it??Hello, Oldershaw.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with mail.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Cheers,
Jason H. -
When trying to send an email this message appear: No se ha podido firmar el mensaje
When trying to send an email this message appear: No se ha podido firmar el mensaje. Se ha producido un error al intentar firmar este mensaje con un certificado de “[email protected]”. Compruebe que su certificado para esta dirección sea correcto y que la clave privada correspondiente esté en su llavero.
Hi Srini,
OS is XP
Database = 10g
EBS - 11.5.10.2
When i tried with simple code like below i am getting mail .
CREATE OR REPLACE PROCEDURE APPS.send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255);
l_mail_conn utl_smtp.connection;
BEGIN
SELECT value value1
INTO l_mailhost
FROM v$parameter
WHERE name like '%smtp%';
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
Can you please let me know if i am wrong in the following one
1. After running the program, the output saves at ''/u07/applmgr/dev/devcomn/admin/out/DEV_wg-oa-01/RGADWALA.5929617"
This information i got from fnd_concurrent_request table.
* Do i need to have Write and Read permissions for the above said path
2. The above said path I can see in the V$parameter table for column Name = 'utl_file_dir'
3. I even created an Directory Name as 'OUT_DIR' in all_directories table with same path as above.
I hope i have cleared your doubts, can you please let me know where exactly i am going wrong in my earlier procedure.
Regards,
RR -
When trying to send an email I can not access "insert addresses" link, what is wrong?
I am using Windows XP and when trying to send an email using Yahoo email I can not insert address from that link. It will not open. I can not find a way to solve this. Help. Thanks
See this:
[http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox] -
Getting error message Cannot Resolve Symbol when trying to compile a class
Hello All -
I am getting an error message cannot resolve symbol while trying to compile a java class that calls another java class in the same package. The called class compiles fine, but the calling class generates
the following error message:
D:\Apache Tomcat 4.0\webapps\examples\WEB-INF\classes\cal>javac
ConnectionPool.java
ConnectionPool.java:158: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
private void addConnection(PooledConnection value) {
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
The code is listed as follows for PooledConnection.java (it compiles fine)
package cal;
import java.sql.*;
public class PooledConnection {
// Real JDBC Connection
private Connection connection = null;
// boolean flag used to determine if connection is in use
private boolean inuse = false;
// Constructor that takes the passed in JDBC Connection
// and stores it in the connection attribute.
public PooledConnection(Connection value) {
if ( value != null ) {
connection = value;
// Returns a reference to the JDBC Connection
public Connection getConnection() {
// get the JDBC Connection
return connection;
// Set the status of the PooledConnection.
public void setInUse(boolean value) {
inuse = value;
// Returns the current status of the PooledConnection.
public boolean inUse() {
return inuse;
// Close the real JDBC Connection
public void close() {
try {
connection.close();
catch (SQLException sqle) {
System.err.println(sqle.getMessage());
Now the code for ConnectionPool.java class that gives the cannot
resolve symbol error
package cal;
import java.sql.*;
import java.util.*;
public class ConnectionPool {
// JDBC Driver Name
private String driver = null;
// URL of database
private String url = null;
// Initial number of connections.
private int size = 0;
// Username
private String username = new String("");
// Password
private String password = new String("");
// Vector of JDBC Connections
private Vector pool = null;
public ConnectionPool() {
// Set the value of the JDBC Driver
public void setDriver(String value) {
if ( value != null ) {
driver = value;
// Get the value of the JDBC Driver
public String getDriver() {
return driver;
// Set the URL Pointing to the Datasource
public void setURL(String value ) {
if ( value != null ) {
url = value;
// Get the URL Pointing to the Datasource
public String getURL() {
return url;
// Set the initial number of connections
public void setSize(int value) {
if ( value > 1 ) {
size = value;
// Get the initial number of connections
public int getSize() {
return size;
// Set the username
public void setUsername(String value) {
if ( value != null ) {
username = value;
// Get the username
public String getUserName() {
return username;
// Set the password
public void setPassword(String value) {
if ( value != null ) {
password = value;
// Get the password
public String getPassword() {
return password;
// Creates and returns a connection
private Connection createConnection() throws Exception {
Connection con = null;
// Create a Connection
con = DriverManager.getConnection(url,
username, password);
return con;
// Initialize the pool
public synchronized void initializePool() throws Exception {
// Check our initial values
if ( driver == null ) {
throw new Exception("No Driver Name Specified!");
if ( url == null ) {
throw new Exception("No URL Specified!");
if ( size < 1 ) {
throw new Exception("Pool size is less than 1!");
// Create the Connections
try {
// Load the Driver class file
Class.forName(driver);
// Create Connections based on the size member
for ( int x = 0; x < size; x++ ) {
Connection con = createConnection();
if ( con != null ) {
// Create a PooledConnection to encapsulate the
// real JDBC Connection
PooledConnection pcon = new PooledConnection(con);
// Add the Connection to the pool.
addConnection(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// Adds the PooledConnection to the pool
private void addConnection(PooledConnection value) {
// If the pool is null, create a new vector
// with the initial size of "size"
if ( pool == null ) {
pool = new Vector(size);
// Add the PooledConnection Object to the vector
pool.addElement(value);
public synchronized void releaseConnection(Connection con) {
// find the PooledConnection Object
for ( int x = 0; x < pool.size(); x++ ) {
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// Check for correct Connection
if ( pcon.getConnection() == con ) {
System.err.println("Releasing Connection " + x);
// Set its inuse attribute to false, which
// releases it for use
pcon.setInUse(false);
break;
// Find an available connection
public synchronized Connection getConnection()
throws Exception {
PooledConnection pcon = null;
// find a connection not in use
for ( int x = 0; x < pool.size(); x++ ) {
pcon = (PooledConnection)pool.elementAt(x);
// Check to see if the Connection is in use
if ( pcon.inUse() == false ) {
// Mark it as in use
pcon.setInUse(true);
// return the JDBC Connection stored in the
// PooledConnection object
return pcon.getConnection();
// Could not find a free connection,
// create and add a new one
try {
// Create a new JDBC Connection
Connection con = createConnection();
// Create a new PooledConnection, passing it the JDBC
// Connection
pcon = new PooledConnection(con);
// Mark the connection as in use
pcon.setInUse(true);
// Add the new PooledConnection object to the pool
pool.addElement(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// return the new Connection
return pcon.getConnection();
// When shutting down the pool, you need to first empty it.
public synchronized void emptyPool() {
// Iterate over the entire pool closing the
// JDBC Connections.
for ( int x = 0; x < pool.size(); x++ ) {
System.err.println("Closing JDBC Connection " + x);
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// If the PooledConnection is not in use, close it
if ( pcon.inUse() == false ) {
pcon.close();
else {
// If it is still in use, sleep for 30 seconds and
// force close.
try {
java.lang.Thread.sleep(30000);
pcon.close();
catch (InterruptedException ie) {
System.err.println(ie.getMessage());
I am using Sun JDK Version 1.3.0_02" and Apache/Tomcat 4.0. Both the calling and the called class are in the same directory.
Any help would be greatly appreciated.
tnx..
addiIs ConnectionPool in this "cal" package as well as PooledConnection? From the directory you are compiling from it appears that it is. If it is, then you are compiling it incorrectly. To compile ConnectionPool (and PooledConnection similarly), you must change the current directory to the one that contains cal and type
javac cal/ConnectionPool. -
I am receiving an error message when trying to send an email.
I recently had to change my email password. Now when trying to send or forward a message on my Iphone 4s I am receiving an error that my user name or password is incorrect. My phone service is through AT&T and email is embargmail.com.
Where did you change the password? Did you go into the email account on your phone and change the password as well? You need to check your SMTP settings, as that is what controls sending mail. If you get an error when trying to receive mail, that is the incoming server.
-
2 error messages in a row when trying to sync ipod
I am having no trouble putting my music into itunes but when I try and sync it to my ipod video an error message comes up that says "The iPod cannot be updated.The disk could not be read from or written to."
when I click OK, then another message comes up saying,
"The iPod cannot be updated. An unknown error occured(-50),
I have updated itunes an done everything I can think of to correct this, I have tried to sync a few cds to my ipod video and this has happened everytime.
Please Help,
Caitlin
Windows XPI just realized that I put this message in the wrong discussion board, Im not using a Mac, but if anyone can help out still that would be great.
Sorry for the confusion. -
Error message WMC604 in VZAM when trying to connect to 4G using Novatel USB551L.
VZAM recognizes the modem, and attempts to connect to 4G. After about 10 seconds, a message appears,"Error WMC604, Device could not establish a connection". (I have no problem connecting to 3G, just 4G)
One clue: If I have "Control Panel>Network Connections>Novotel 551L open when I try to connect, I can watch (if I am connecting to 3G) the modem aquire an IP address and connect. If I am connecting to 4G, there is no such activity shown on Control Panel>Network Connections>Novatel 551L modem. It just does nothing until the error message appears in VZAM. It's as if VZAM is not communicating with the modem although during this time VZAM displays a message "connecting".
I have created a dial-up connection in Windows 7 according to the Verizon knowledge base article ID=29355 just so I could use 4G, and the modem connects and works just fine. I just wish I get it to connect to 4G using VZAM.
I am using VZAM version v7.6.3.1(2642f) and one of the things that VZ tech support suggested was replace the SIM card, but that didn't make any difference. I am using Dell XPS 8300 desktop running Win 7 Home Premium,SP1 currently, although problem is the same on my Dell 5160 laptop running Win XP, SP3.
Hoping someone here on this board can help. I have spent hours on the phone with Verizon tech support and they say they have never heard of this error, and have no clue how to make it go away. In checking Google, I see that it is in fact a fairly common error in VZAM, but no one seems to know how to fix it......Verizon reps on the board feel free to come to my rescue?
HELP!!!!AdamE_VZW
Thank you for your reply. I checked Device Manager for conflicts and see none. I opened VZAM and Device Manager>Novatel Modem side-by-side on the screen and attemped to connect to 4G using VZAM while watching Device Manager for conflicts. There were none indicated when the WMC604 error appeared in VZAM. According to Device Manager, my Novatel modem driver is version 1.1.12.0 ; dated 12/8/10. The "update driver" button is grayed out so I don't know how to check for a newer version. This version is the one that came on the VZAM install CD I belive.
Some background about this problem: When I first got this modem and installed the software, it worked as it should. It came up in Global mode and connected to a weak 4G signal that was comming from the Portland OR airport. Because the signal was weak and un-reliable, the modem would constantly shift back to 3G, and then every few minutes back to 4G, over and over. I got tired of putting up with the constant hunting, and, using the diagnostic screen, locked it into EVDO mode until 4G went live in Portland OR in the middle of June. During the time it was in EVDO (3G) mode, I had no problem connecting to 3G using VZAM. When Portland went live, I locked it back to LTE mode, and that was when I discovered the error WMC604 message. This was using my previous computer, a Dell Dimension 4500 desktop, Win XP,SP3, and an external Wilson log-periodic tri-band antenna. Since Portland went live, my current RSSI for 4G runs around -68db, and SINR varies between -9 to -12 db.
I recently got my present computer, a Dell XPS-8300 desktop, Core i7, Win 7 Home Premium, SP1. I did a fresh install of VZAM on this new computer using the CD that came with the USB551L modem and then checked online (using 3G) for VZAM updates. It says I have the latest version. The problem is exactly the same on the new computer as it was on my other 2 computers. That tells me that the problem must lie with the modem firmware or hardware, because the problem follows the modem, no matter what computer it is hooked up to. I even took it back to the Verizon store where I got it and they hooked it up to one of their computers and got the same error message when trying to connect to 4G. 3G worked properly
As I mentioned before, the modem instantly connects to 4G using the Win 7 dial-up connection I created and gives pretty good speeds, about 10MB down and 4-5MB up, according to SpeedCheck.com.
I can use it the way it is, it is just frustrating that it won't work using VZAM.
Thank you for your attention and help,
Inst_Tech -
Error Message 040EAE-5D-0000000 when trying to create recovery media creator
I need to create a recovery backup, and have a 20 G brand-new Verbatim thumb drive for it. When I go to try to create a backup on the thumb drive, the first error message was a general one. Started over, and then got the error code 040EAE-5D-0000000. I can't find anything on this error code after searching the forum, and on Google. I need to create a backup on the thumb drive, but I just can't seem to get this to work. Help, please.
Things got worse. In doing research, it appeared that a driver might have been the issue. So I went to the Toshiba site to look at drivers for my laptop. There were a number listed. I installed several system updates, and now my laptop won't boot windows. The following is the startup repair error message I'm now getting:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200529
Problem Signature 05: AutoFailover
Problem Signature 06: 7
Problem Signature 07: Bad driver
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
I really don't want to put this thing in a box and ship it to Toshiba. I need to back out the drivers that were installed. But I need to get Win 7 to boot to do so. It would have been great if I had been able to create the system recovery media that I was trying to create in the first place. -
I keep getting the error message "The requested operation requires elevation" when I try to open attachments or documents. How do I get rid of this?
This is the entire message. I have gotten this message many, many times and it's always the same.
I'm trying to open text attachments to Thunderbird with Open Office.
Maybe you are looking for
-
I took a video with my i pod and sent it to my PC and My sons PC,we both can open and see the video,BUT I can open it on my i pod? Phil
-
Help! Itunes 10 made songs vanish from ipod, but still in library!
I am frantic! I am a music teacher and use my ipod daily. This morning I upgraded to Itunes 10 and synced as normal. During my first class I noticed that all of a sudden half of the songs I needed weren't on my Ipod! They are in my itunes and play pe
-
Hello All MacPro users, I have a Macbook pro 2011 15" and since I am into composing music I use Logic Pro and Native Instruments which require quite some RAM accessing & loading complex samples and effects. I was wondering if I can upgrade the ram to
-
How to build projects of ADF application
I need to use ANT to deploy EAR file to weblogic 10.3.5. I download source code from SVN. Then, in the Jdev 11.1.1.4, I create build.xml and build.properties for Model and ViewController using Jdev . Then, I delete all this application and re downloa
-
'Internet Connect' keeps coming up
My internet was down all day yesterday (SBC-Yahoo DSL). Today it is back up. All morning I continue to get the 'Internet Connect' box that comes up and asks if I would like to keep the connection. My 'Location' is set to 'Automatic' and the 'Show' is