Error message (-50) after updating to 7.3 version

Hi i recently just updated to the newest itunes update which included the new iphone features and stuff (7.3. after i updated i went into my itunes library to find a recurring message dialog saying
[The itunes library file cannot be saved. an unknown error occurred (-50)]
after clicking do not warn again box. i soon found out that my library wasn't saving songs i was putting in to it like new purchased songs and other stuff came the next time i started itunes.
i am asking what the problem is??? if any help would be great

This bug did in fact appear for many of us when we upgraded to iTunes 7.3.
Here 's a lengthy thread that discusses some possible solutions.
For what it's worth, I uninstalled 7.3 and rolled back to an earlier version of iTunes.

Similar Messages

  • Getting error message 42408 after updating

    Earlier this week I got the available update box , did the update and now 3 days later
    I Tunes is telling me that it does not recognize my I pod and to restore it .
    After doing that I keep getting this error 42408 saying about not being authorized .
      I can't sync anything no music no apps. Help .

    Jtyler2009 wrote:
    ...  Anyone else getting this ...
    Please see the  More Like This  section on the right

  • Curve 9320 error message 200 after updating

    My phone is now dead :-(
    When I connected my phone to the Desktop software this morning it gave me an update message.  I dutifully updated - and my phone has died.   I have removed all the desktop software and cleaned out all other files, and reloaded, but still cannot connect phone to pc.  It simply keeps rebooting until the error 200 message pops up again!
    Any suggestions gratefully received.  It was working perfectly until  the attempted download of the latest software.
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Something went wrong with the update, and now a reload is needed. The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes.  How do I resolve this issue?

    I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes.  How do I resolve this issue?

    The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

  • HT202879 I am stumped - trying to open a recent Pages file but error message says that I need a "newer version" of Pages.  My software updates show that there are no updates available.  I recently updated Pages but it is not consistent.

    I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages.  My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • I keep receiving an error message, "unable to update files in cache"

    Yesterday I install the latest version of Firefox 3.6.14 and I'm constantly receiving an error message, "unable to update files in cache," is this a settings issue, and how can I fix the problem.

    Hi Terry, A post is the message that anyone has just typed in. When you replied to me, that was your post. I am replying to you so this is my post. Think of it as sending an email or mailing a letter at the "post" office.
    Now right at the top of the last post (message) you sent me is a Post#, then the date and time and under that the thread subject "Re: I am trying to download Adobe Flash Player 10 and I keep getting......
    The first time that you posted, you described your problem. The next post after that is #1 and so on.
    The Adobe Flash Player forum works very much like email except there are a lot of "threads". A thread is what each message you see is called. Everyone that registers can start their own thread (subject). Then other people see it and can post to your thread and try to help you with your problem.
    You did pretty good, you registered, and you started your first thread
    Now do you feel somewhat more relaxed?  Hope so.
    Take a look now and see if you can find the Post# and etc that I described above.
    Thanks,
    eidnolb

  • I am getting run time error 6034 after updating iTunes to new version.Any help?

    I am getting run time error 6034 after updating iTunes to new version.Any help?
    I tried different ways to resolve it like uninstall/install itunes
    I am also getting error message on iTunes helper.exe

    Hi isush!
    I have an article for you that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT1222 We were able to update iPhones but get an error message when trying update our iPad. Ay suggestions?

    We were able to update iPhones but get an error message when trying update our iPad. Ay suggestions?

    What iOS are you currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • "Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

    "Adobe Illustrator cs5 quit unexpectedly" error message.
    After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
    Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
    Help pls.
    Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Getting error message -050 after downloading 11.1

    Getting error message -050 after downloading 11.1, radio and match do not work.

    What is the version of your OHS. Are you referring to 11gR2 webgate for OHS ?

  • I am trying to update to 11.1 on a Windows XP system and I keep getting an error message saying the update can't locate the itunes.msi file...where is that located?

    I am trying to update my Itunes software on a Windows XP system and keep getting an error message saying the update can't locate "itunes.msi"  where is that file located?
    thanks, Judy

    The servers are getting slammed by millions of people wanting to upgrade..   just give it some time, and soon enough you'll have your upgrade.

  • Error  message 16 after install

    I have error message 16 after installing Photoshop CC and LR 5. I've tried uninstalling and re-installing. I have a MacPro running Mavericks. Any ideas?

    well, it was worth a try...Any other suggestions?  It still isn't working.

  • HT201210 i cant update my iphone via itune. ERROR message 1015. have updated everything, still didn't work out

    i cant update my iphone via itune. ERROR message 1015. have updated and done all the trouble shooting, still didn't work out. I tried, reinstalling everything, nothing happens, this is suck! can't use my iphone!

    http://support.apple.com/kb/TS3694#error1

  • HT1338 I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it."

    I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it."  how do I get rid of these Old unneccisary Updates?  anyone?

    Welcome to Apple Communities
    What's this app? You need to use another Apple ID to update it

Maybe you are looking for