Error message 6000 cannot setup my new canon pixma mg6320

error message 6000 prevents me from setting up my new canon pixma mg6320

Hi Janice,
An Error 600 is a service error.  That being the case, we recommend contacting our support team to resolve this using the Contact Us link.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I cannot install my new Canon Pixma Mg2120 on my laptop. What driver do I need to do it?

    I am having problems installing my new printer onto my laptop that has Windows 8 on it.  The CD that came with it will not install saying that the driver is being used by another user on this computer. I am the only user.  Any help would be greatly appreciated.

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2120#D...
    Go to the above link and type drivers and software.  Click your operating system, Windows 8, and it will take you to the necessary driver downloads.

  • HT5654 I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

    If iTunes is otherwise working properly start with TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, otherwise move on to Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete.  Help!!!!

    It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
    How to locate the serial number and identify your model
    And to get the version of Mac OS that's installed:
    From the Apple Menu at the left end of your menu bar, select "About this Mac..."
    In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
    If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade.

  • MG3250 Printer throws up error message - Scangear cannot communicate with scanner for these reasons

    Hi
    I have an MG 3250 printer running off an HP Pavilion Laptop using Windows 8.1. Every time I try to scan  I get an error message that 'cannot  communicate with scanner for these reasons...........etc'. The only way I can get the printer / scanner to work is by going through the Control Panel / Hardware & Printers route. This seems terribly slow and time consuming. What is wrong and what needs to be done to correct the problem?
    Thanks

    I have the exact same problem as you with my new Canon LiDE 120. The errors I get are: 2, 156, 182, 55 and sometimes 77 when using it on my Windows 8.1 (64 Bit) desktop PC. I have tried installing and uninstalling the drivers multiple times, used different ports and still nothing. It does however work properly on a Windows 7 device.
    My PC's specification is as follows:
    Windows 8.1 (64 Bit) - With latest updates
    Avast Premier
    Malwarebytes
    ASUS z87 Pro
    Intel 4770k
    ASUS GTX 670 (4GB)
    8GB 1600MHz Kingston RAM
    Things I have done
    Tried different ports (USB 2.0 and 3.0)
    Installed all software & driver from CD
    Installed all software & driver from Canon Website
    Installed only the latest driver from Canon Website (April 2015)
    Tried to use Windows Fax & Scan, Scan, IJ Scan Utility, Scangear and Vuescan.
    What happens
    The physical buttons on the device are unresponsive
    The computer says it is warming up, but nothing happens
    It starts to scan for a few seconds and then comes to an abrupt end - this can happen at 10% of the scan or even at 91%.
    Surely the problem cannot be with Windows 8.1 since the device was only released last year. What could be the issue? I called their support line and was advised to clear the drivers of previous scanners used by my system, I did this and there still is no change. Could somebody please help me! 

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Error message: iMovie cannot save changes to the library!?!

    iMovie crashed my computer and now I can't creat a new movie.
    Here's the full error message:
    iMovie cannot save changes to the library.
    The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
    What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
    Please let me know if you have any suggestions.

    You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) .  One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects).  If you can then iMovie itself is OK.  If not  then the only other thing I can think of is re-installing iMovie  (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
    Is everthing else working OK after your computer crash?  Maybe you should also run Verify disk in Disk Utility.
    Maybe someone-else has some other suggestions (I have not heard of this problem before)?
    Geoff

  • Error message: "iTunes cannot read the contents of the iPod."

    I wanted to get my dad a new iPod for Xmas and transfer all his music from his ancient Classic. But when I connect to my MacBookPro, I get the error message: "iTunes cannot read the contents of the iPod." I see that 90% of the ipod drive is used, but I don't see any songs listed either on the iPod screen or in iTunes, which is worrying. Is there anything I can to save the music? He will be so upset that it's all gone...

    My suggestions, when Restoring the iPod.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC.
    Disconnect all other USB devices, except the mouse and keyboard.
    Stop all other programs except iTunes.
    Good Luck!

  • Trying to sync selected (greyed out) contacts to my replacement 4s.  Get error messages - computer not setup to sync - override or OK.  OK - session could not start.  How do I fix?

    I have a new replacement 4s.  I am trying to set it up.  I hate iCloud but need it to sync my calendar to my phone.  I mistakenly set it up to sync Contacts too and found out it synced ALL contacts which I do NOT want.  I used to use iTunes to sync only selected contact folders (one I call Sync).  Others are too sensitive to have on my phone.  So I turned off "where is my iPhone", and turned off "Contacts" on iCloud.  It said it would delete all my contacts on my phone the next time I sync (using iTunes).  So I try to sync my Contacts using iTunes and find that under "Info" on the device tabs my only possible selection is ALL contacts with the "Selected" button greyed out.  But even leaving all checked, I get the message "iTunes cannot sync information with the iPhone because syncing has been disabled on this computer (my Mac).  Do you want to enable syncing?"  I hit the button "Enable syncing" and I get the error message "Syncing cannot be enabled on this computer"  with "Override" and "OK" my choices.  If I select "OK" I get the error message "iTunes could not sync information to the iPhone (Name) because a sync session could not be started".  I can sync my music and my apps but get this stupid message otherwise.  What gives and I do I fix this?  Thanks

    Actually I can't sync anything - no music, photos, etc.  And it tries to start syncing as soon as I plug in my iphone and itunes is open.  It ends "sync" but hasn't done anything.  I have tried deleting lockdown files (per "solution" found here).  I have deleted all my backups (per other "solutions").  I have restored my iphone 2x.  I have done soft boots of my iphone.  My macbookpro 10.9.3.  iphone 7.1.1.  iTunes 11.2.2 (3). 

  • When i am backing up my iphone i receive an error message saying cannot backup because backup cannot be saved

    I receive an error message saying cannot backup becasue backup cannot be saved when i am trying to backup my iphone 4s

    No, I'm just backing up to my PC. I've never backed up to this computer (its my laptop). I've normally use my desk top but it has crashed. It did this to my 3GS but now it's doing it to my new 4s.

  • Error message " You cannot Update an Expired Instance. Instance needs to be

    Hi,
    I am trying to update Insatll base records in csi_item_instance table( like updating system_id value) by calling API csi_item_instance_pub.update_item_instance. I am getting error message " You cannot Update an Expired Instance. Instance needs to be un-expired before any updates". But actually instance is not expired and active_end_date field is null and instance_status_id=3(Latest).I am getting this error message for only some records.but for these records also x_return_status = S.
    Please suggest what could be the reason.
    Thanks in advance.

    It took quite a while to find this:
    Dear xy,
    Thank you for purchasing “Inside Apple”. A new version of the book is available to you at no charge.
    Here is how to download the new version:
    1) Tap the iBooks app on your iPad, iPhone or iPod touch. If you are already in the iBookstore, tap on “Library”.
    2) Tap the “Edit” button.
    3) Locate “Inside Apple”, tap “Edit” and then “Delete” to delete the book.
    4) Tap the “Done” button.
    5) Tap the “Store” button, scroll down to the bottom of the page and sign out of your account.
    6) The page will refresh. Scroll down to the bottom of the page and sign back in to your account.
    7) If you are not already in the “Purchases” page, tap the “Purchases” icon at the bottom right corner of your screen.
    8) Locate “Inside Apple” in your purchases and tap the “Redownload” button.
    You will now have the updated version of the iBook in your library. Thank you for being a loyal Apple customer and have a great day!
    Sincerely,
    iTunes Store Team

  • Audio cd burn from 11.1 not playing on old version of iTunes on another MAC. error message was cd created on newer version of iTunes.  If the disk was a audio cd it should not matter the iTunes version.

    The error message was cd created on newer version of iTunes.  If the disk was a audio cd it should not matter the iTunes version. I converted all songs on playlist to MP3 and then selected burn playlist and checked audio cd. This worked in itunes 11.0.5. Also itunes 11.1 will not accept the second disk on a cd audio burn. It just keeps telling me to insert a blank disk, no matter how many blank disks are inserted

    I think that the operating system is 10.4.11 and iTunes isn't responding to this operating system. I cannot upgrade the operating system to a version any later than what it is as I think it would then go to Tiger.
    10.4 is Tiger, and 10.4.11 supports the latest version of iTunes and QuickTime. So either the system isn't at 10.4.11 - your original post said 10.4.1 - or there's something wrong with the system in which case earlier versions of iTunes/QuickTime might well also fail to install.
    Please confirm the version of Mac OS X that really is on the system and we'll go from there.

  • Error message Iphone cannot make or receive calls.  Restore from iTunes

    I received this error message - "Iphone cannot make or receive calls.  Restore from iTunes" 
    Has anyone received this before & know what the issue is?

    If you are restoring from a backup, that's your problem. The backup is corrupt. After you restore, you need to select "Set up as new." You will need to reinstall everything again.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • IBook Store error message "you cannot update this item"

    When my book was finally in the iBookstore, I purchased it, to see how the process works and if everything is ok for a potential customer. Turned out that I mad some minor mistakes, which I fixed (hopefully) and published an new Version (successfully, I guess). Now I need to update the purchased book to cheeck if everything is ok.
    There IS an Update in the iBookstore, but trying to run the update ends up in an error message "you cannot update this item".
    My fault? Not my fault? What to do?
    Has anyone an idea?

    It took quite a while to find this:
    Dear xy,
    Thank you for purchasing “Inside Apple”. A new version of the book is available to you at no charge.
    Here is how to download the new version:
    1) Tap the iBooks app on your iPad, iPhone or iPod touch. If you are already in the iBookstore, tap on “Library”.
    2) Tap the “Edit” button.
    3) Locate “Inside Apple”, tap “Edit” and then “Delete” to delete the book.
    4) Tap the “Done” button.
    5) Tap the “Store” button, scroll down to the bottom of the page and sign out of your account.
    6) The page will refresh. Scroll down to the bottom of the page and sign back in to your account.
    7) If you are not already in the “Purchases” page, tap the “Purchases” icon at the bottom right corner of your screen.
    8) Locate “Inside Apple” in your purchases and tap the “Redownload” button.
    You will now have the updated version of the iBook in your library. Thank you for being a loyal Apple customer and have a great day!
    Sincerely,
    iTunes Store Team

  • Cant take pics any more, error message sez "CANNOT TAKE PHOTO"

    cant take pics any more, error message sez "CANNOT TAKE PHOTO there is not enogh available storage to take photo. You can manage your storage in Settings." but then I go there and cant do anyhting...?
    I believe I have backed up all photos to my computor and I even just now bought more icloud storage for $20.00 a year and still nothing....?
    I cant find a way to delete camera roll....?

    Guess what? The folks responding to you here are all just users like you, we don't work for Apple, so, you know, your pain is of little interest.
    This has been the cause of your problems:
    I checked in Iphoto preferences and the box to automatically import photos to Iphoto was unchecked.
    What that means is you have connected your camera and iPhoto has imported references to your photos - links, in other words. It did not copy your files into the Library.
    Then you took away the camera.
    Now iPhoto is looking for the pictures.
    You'll need to import the images again - but if you do you'll have masses of duplicates. So, trash the existing library, create a new one and start over.
    For more on iPhoto and file management see this User Tip:
    https://discussions.apple.com/docs/DOC-6361

Maybe you are looking for