Error message 63511 - Real Estate Object

Hy,
I am in a SAP Business All in One...CO module
I want to do a manual transfer - KB11N - between two cost centers and receive the following error
"Real Estate object cannot be found
Message no. 63511
Diagnosis
The system cannot determine any real estate objects with your entries. The following details are required for determining a real estate object:
Procedure
Specify the object according to the rules stated."
I don't understand what is about ...
Thanks a lot, a good day

Hi Ramki
I have check the same i.e. in ECC. All the necessary changes explained in the notes have already been done in the release we are using. And I meant that the notes are not relevant for the problem I am facing now.
Thanks a lot for your concern.
Regards
Kathirvel

Similar Messages

Error Message: Real estate object cannot be determined from entries

Hi
We are using the BBPIV01 IDoc Type to pass Invoice data to backend system. We have implemented BBP_ACC_CHECK_ICC BADI to update the RL_EST_KEY (Internal Key for Real Estate Object) field. But when the IDoc is processed in the backend system it end up with the following error message.
<b>Real estate object cannot be determined from entries (ID: RECAAP, No: 012 ).</b>
Note: We are treating Real Estate Contract as an Account Assignment Category in SRM.
Any help would be highly appreciated.
Regards
Kathirvel

Hi Ramki
I have check the same i.e. in ECC. All the necessary changes explained in the notes have already been done in the release we are using. And I meant that the notes are not relevant for the problem I am facing now.
Thanks a lot for your concern.
Regards
Kathirvel

Real estate object cannot be determined from entries

Hi All,
When i am posting GLs (T.codes FB50L & FB50), i got error like Real estate object cannot be determined from entries,
For this i am using the one expence account and one bank account,
As we know for the bank acccounts Value date is mandatory, If i give the value date the system is showing the above error,
If i dont give the value date system is allowing to post,
Give me the solution and what is the cause of the error,
Thanks ,
Kalyan.

Hi
You are posting outgoing payment for GL through FB50/L.
Use F-07 - Outgoing payment other then customer/vendor.
Regards
Sampath

Web-UI error message "Access via 'NULL' object reference not possible"

I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.

Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun

IW32 - assignments to real estate object not possible

Hello, we want to assign an order to a Real Estate Object in transaction IW32.
We go to order header data screen, choose Goto->Assignments, but Real estate object submenu is grey.
Please explain us why?
What should we customize before to activate this feature?

Hi Sridhar,
Thanks for the response. Unfortunately I worded my question incorrectly. And yes, you are right as to the use of a cost element and a cost center.
By default you can post revenue from a customer contract to a cost element in real estate using flow types, account symbols, etc, but we managed to post an manual customer invoice (FB70) against a cost center as well as specifying the standard GL account and profit center (profit center generated using the contract details).
Is it possible to setup this situation (use of cost centers) in flexible real estate through config using flow types and account symbols?

How do I fix my PDF so I don't get the error message: "expected an array object"?

When I try to delete certain pages from my PDF file (which is larger than 3,000 pages), I get an error message that states "expected an array object." I am unable to delete these pages. How can I fix this problem?

It looks like the original PDF file is damaged in some ways. Have you tried creating a new file from the existing file to see if it works? The quickest way to create a new file is to print the existing file to a PDF file. OK you lose some quality but this is just a test to see if there is anything else wrong with the Acrobat setup or with the document itself.

PI7.11 IR Error Message during creating of objects

Hi
I get follwing error message every time I create a new object e.g. a receiver determination.
while trying to invoke the method com.sap.aii.ib.bom.gen.XiReference.getTypeId() of an object loaded from local variable 'xiReference'
Afterwards i choose close an the object will be created.
Any idea what the cause of this could be?
Thanks in advance
Michael

Hello Sarah
I checked with our basis guys, but the recommended patch is already obsolete for our system.
Michael

Error message when deactivating Mitigation object workflow in CUP

Hi All,
I had activated the mitigation object field in the workflow types in Miscelleaneous in CUP. Now when I try to deactivate it I get an error message Cannot deactivate since the field is in use in Custom Fields I had created a custom field for password, Now when I go to delete that field I also end up getting a message Cannot delete since referred in request data header I am not sure if it is referring to this custome field. If I try to change the custom field password, I get an error message Update custom field to non-workflow field failed since it has been used as workflow field.
I am not sure if it is referring to this custom field, but this field definately seems to have its own share of problems!!
Thanks,
CP

Hi Chinmaya,
You can not delete a custom field if it is associated with any request or have been used in the workflow.
If custom field is used in the request, you can archieve the request, than you would be able to delete the custom field.
If the custom field is used in initiator than you have to delete the initiator. After that you can delete the custom field.
After deletion of Custom field only you can deactive the mitigation object field in the Misc.
Kind Regards,
Srinivasan

Import budget by using DTW, error message "cannot find this object in B1 application defined, object defined error 65171

Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua

Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty

Error message: Unable to cast object of type 'System.DBNull' to type 'System.String'

Hi everyone, I have recently installed a trial version of SDL Trados (a computer-assisted translation software) and at some point (when I try to create a new translation memory) this error message appears: Unable to cast object of type 'System.DBNull' to type 'System.String' Is this a problem with the software or the laptop ? If it's the laptop, can you please help me solve this ? Thank you,Caroline

Actually there was not problem witg the laptop ! Please ignore this topic. Thanks.

Error message while creating text object

I am trying to create a text object and text id's for an application. I go to se75 to do this and make a text object called ZABC and upon save I get an informational message saying the following:
Observe name ranges: Y,Z for customers, J_NC for partners, A..X for SAP
When I click the green checkbox, it pops up another box saying the object is not within the valid name range. Save anyway?
I tried creating one with Z_ABC and that came up with the same thing. What am I doing wrong here?
Thanks,
Josh

Read the information message carefully. Then proceed, if you intend to have custom "standard" texts (sort of an oxymoron, but everyplace I've been does this)...
If you are working in a customer system, only create standard texts using the following naming convention:
Initial letter Y or Z in the text name with any text ID
or
Initial letter Y or Z in the text ID with any text name

Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

Hello Community
    "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
domain controller using Active Directory and the UI.
    In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
forest trust with Forest-Wide authentication so that a different forest user(s) or
group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
    But also forestB needs to create a "One-way, Incoming" forest trust so that
I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
in my "forestA" or I can
add user(s) as "domain user(s)" from “forestB” into my "forestA".
    The problem is that when I right click the global group in my forestA and then
properties, when I click "Members" and then the "Add" button when I type
"forestB\username" I get an error message from Active Directory stating:
    "the following object is not from a domain listed in the Select location
dialog box, and is therefore not valid: forestB\username".
    Am I doing something wrong when creating the one-way trust in my
“forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
    Or could I possibly need to select "Change Domain" or "Change Domain Controller"
before adding the users or Groups to my forestA from forestB?
    That is why I am asking
how do you add an Active Directory user from one forest into another forest?
    Thank you
    Shabeaut

Hello Denis Cooper
    That is the end result.
    What I was trying to do was that I was trying to
bring in the user(s) and group(s) from “forestB” into
my “forestA” Global group.
    Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
into the domain local groups on my member servers in my forestA.
    So since the error message is:
"the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
Does your response
mean only Global group(s) from forestB not domain user(s) from forestB have
to been added to domain local groups in forestA?
Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
how without getting the above error message?
Thank you
    Shabeaut

Expected a dict object error message

When attempting to open a PDF file in Reader sometimes get the "Expected a dict object" error message.

Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me.

Error Message : Object does not exist (status management)

Hi Gurus,
I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
1. Order level,
2. Notification,
3. Task level validations.
In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
Now the issue is :
Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
Is anyone aware of this error message, any suggestions are highly appreciated.
Thanks in advance.
Shrikant
Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

Hi ,
You have posted this question long back that is one and half year back nearly.
You got an error message in IW52 stating Object does not exist ( status management ).
Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

Updated Solution Center, get cannot create DIHPAiOFaxManger object error message on 'Send a Fax'

The printer is an OfficeJet J4540 All-In-One, running on Vista Home Premium x64. The orginal Solution Center faxed without any problems. I upgraded to new Solution Center and when I click on 'Send A Fax' I get this error message: "cannot create DIHPAiOFaxManger object". My OfficeJet can and does send faxes manually, but I would like to use the Solution Center. Please, help!!!
neptune49

This might have been a quirk of the installation. So let's try to perform a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-58704-2&cc=us&dlc=en&lc=en&...
Install that and let me know the result!
As an additional side note, you should also be able to use Windows Fax and Scan to fax from your PC as well.
Have a great day!

Error message 63511 - Real Estate Object

Similar Messages

Maybe you are looking for