Error Message -6753 when External Drive/Printers Connected

I downloaded Airport Utility 5.3.2 (532.8) and am now having problems with my Airport Extreme. I have a green light and internet access, but I am no longer able to access the external drive or the 2 printers connected to the Airport (all connected USB through a hub).
When I open Airport Utility and try to update the settings or check on the status of the drive or printers, I get the -6753 Message that prompts me to check my connections. So far, I have repaired permissions, unplugged and disconnected the Airport and even reset it, but when I hook the drive and printers up, it always reverts to this situation.
Has anyone found a fix for this problem or knows how I could install an earlier version of the utility? Thanks in advance.
Grant

You have a hardware fault. Make a "Genius" appointment at an Apple Store for diagnosis. It's a free service.

Similar Messages

  • [Solved] Wierd boot order when external drives are connected

    So, I've got two external drives, an ntfs drive and ext4 drive. After a recent upgrade, I get this error message when starting up the computer with them connected.
    Bootloader: syslinux.
    For the ntfs drive:
    ::performing fsck on '/dev/sda1'
    fsck: fsck.ntfs: not found
    fsck: error 2 while executing fsck.ntfs for /dev/sda1
    ERROR: fsck failed on '/dev/sda1'
    ::mounting '/dev/sda1' on real boot
    mount: unknown filesytem type 'ntfs'
    For the ext4 drive (Megadrive is the name of the hard drive):
    ::performing fsck on '/dev/sda1'
    Megadrive: clean, 230913/188148544 files, 193365856/732566385 blocks
    ERROR: Root device mounted successfully, but /sbin/init does not exist. Bailing out, you are your own. Good luck.
    With both of them connected, it gives the same message as for when the ext4 external is connected. When they are both disconnected, it finds the proper drive that I recorded in syslinux.cfg file.
    What could be causing this? If someone could point me in the direction of how to troubleshoot this, that would be a great help?
    Last edited by anark10n (2013-03-24 22:42:11)

    https://wiki.archlinux.org/index.php/UUID#by-uuid

  • I just downloaded itunes and get an error message (-3212) when I try to connect to the store.  I have an hp pavillion using Windows 8.1

    i just downloaded iTunes for my Windows 8 laptop and get an error message when i try to connect to the iTunes store (-3212)

    Hello Steve,
    Thank you for the details of the issue you are experiencing with the iTunes Store.  I recommend the following steps for error (-3212):
    "Error 3000" through "3999"
    Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
    Find the full article at the following link:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error message displayed when i try to connect to sql*plus

    I get the following error message when i try to connect :
    ERROR:
    ORA-12560: TNS:protocol adapter error
    I have tried :
    sys/change_on_install
    scott/tiger
    system/manager

    There are a few causes for this error. For example
    I get it if I have not started my local database on
    Windows.
    There are lots and lots and lots of suggestions and information
    on Usenet (search on groups.google.com) and on the web that
    should help get a background feel for the problem. I appreciate
    most are written with the expectation that the reader already
    knows Oracle, which may not always be the case; at least
    they will help you explain what you have done and tried
    if you need to ask more help here.
    -- CJ

  • I Get error message -3221 when I try to connect to iTunes store and can not connect

    I had just updated iTunes when I started getting -3221 message and unable to connect. I show my firewall allows iTunes but Can not figure out why it is not working.

    have a look at:
    Possible iTunes Store errors
    iTunes: Advanced iTunes Store troubleshooting

  • Getting error message -6753 when trying to hook up express

    I am trying to hoof up airport express to my airport extreme network and getting this error before I even get started, What does this mean?

    Hey there dahliafromphiladelphia,
    If you're unable to set up Home Sharing in iTunes on your computer, then I'd like you to please follow the directions in the article below.
    Troubleshooting Home Sharing - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

  • I have tried to update my iPod Touch 4G to the latest update. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?

    I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
    Thanks in advance
    Adam

    If you get a network timed out error, try disabling the security software on the computer during the download and install.
    You can also try a direct download andinstall by:
    iPod, iPhone and iPad Firmware Download
    Nera the top of the page aretheinstructions for selecing the download for the install.

  • HT1338 I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

    I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?

    Switching an iTunes Store account to a different country
    http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
     Cheers, Tom

  • HT1665 I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    I face an error message Oxe800012 when connecting iphone 4s to the computer, any help please ?????

    See this support article: http://support.apple.com/kb/TS3221

  • When trying to deleted contact in address book receive error message "Contact updated externally. Changes will be lost and the viewer closed"

    I recently added a contact sent to me via BBM as .vcf file and when i try to delete this one particular contact i get the following error message error message “Contact updated externally.  Changes will be lost and the viewer closed“.
    I have added contacts using the .vcf received via BBM but never encountered this issue.
    I've reset the device, deleted in Outlook as i'm on a BES server and still the same.
    Anyone have this problem?

    v5.0.0.423 (Platform 5.1.0.116)

  • I can't download iTunes to my vista computer. Error message says that computer is not connected to internet, when it is.

    I can't download iTunes to my vista computer. Error message says that computer is not connected to internet, when is is. Firewall allows iTunes.

    This is a common issue, temporarily disable the Anti-Virus and Firewall software on the laptop. 

  • I get error message -3259 when trying to download Version 5 update for I  pad, yet the internet connection is still operational. Why is this?

    When trying to upload Version 5 update for IPad after the download is complete and the files are being processed I get an error message - 3259 which says the internet connection is timed out but in fact it is still operational. The download is unsuccessful. Why is this?

    Try temporarily turning off your firewall and antivirus software until the download has completed.

  • TS4002 When trying to access i message on my iPhone 4s an error message pops up; "Check your network connection or try again later" how can i fix this?

    When trying to access imessage on my iPhone 4s an error message pops up; "Check your network connection or try again later" how can i fix this? This became a problem after i updated the latest software update and i can't seem to fix it.

    Hi annmariefromuky,
    If you are having issues accessing iMessage, you may find the following article helpful:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Regards,
    - Brenden

Maybe you are looking for

  • Display month of the next event as default

    Is there any way to make the event calendar display the month of the next upcoming event when the event calendar loads, and not the current month as default?

  • Enabling firewire out from Color?

    Has anyone attempted to edit the file in color where it says video output disabled? I truly believe that Silicon Color the originator of Color intended for firewire out to be enabled, is it possible the apple made a deal with the AJA Kona and the Bla

  • I want the old Symbian interface again

    I have nothing against Symbian Belle (Nokia Belle) as an Os. But I do have comments about its user interface. The user interface of Symbian Belle is terrable, it is inefficient in many, many ways. The best examples of that are the new clock. That peo

  • Schema Class Generator Problem

    I'm getting this error msg when I do the following command line: $java oracle.xml.classgen.oracg -s MySchema.xsd <Line 455, Column -136>: XSD-2028: (Error) Invalid reference: 'http://www.w3.org/2000/10/XMLSchema:dateTime' My XSD's header looks like t

  • Java.exe Access Violation Error(URGENT)

    Hi all, I have created a application for my company. This application requires a user to login into the site by giving his userid/pwd. Once the person logs into the site, there is this error "Java.exe Access Violation Error" which pops up and termina