Error message 816-in SOST, Program -RSCONN01 is not picking this .

Hi friends ,
I had the following error message in SOST tocde <b>Message cannot be transferred to node SMTP due to connection error (final)(message 816)</b>-
When iam running RSCONN01 program it is not picking the paticulr error out line item - Can any one explain me how can i rectify this error and how RSCONN01 can pick this entries also .....
Awating for experts reply ,
Tnks ,
Regards,
veera

Kindly check this link.
http://forums.sdn.sap.com/thread.jspa?threadID=1387916

Similar Messages

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

Error Message:The folder path 'Program Files' contains an invalid character

I have an 80G iPod. I never had a problem with the itunes program until I switched to Vista. When I try to open iTunes I get the following error message:
*The folder path 'Program Files' contains an invalid character*
I have itunes installed on both my HP and on an external hard drive that I use as my backup in case something goes wrong. Neither one opens and I get the same error message on both. I have tried to uninstall iTunes and then reinstall and get the same message so I can't uninstall.
I'm really frustrated, I need to get to my music for a huge presentation in a few days. Can anyone help?
Thanks in advance,
Jejo

Have you tried working through the steps in the General section of this article?
http://support.apple.com/kb/HT1926

Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

Error message-- The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library C:\Program Files (x86)\iTunes\iTunes.dll

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion 6.0.1 maxVersion 6.0.1

I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]]

Error message: Platform 1.9.1.9 is not compatible w/mini &max version 1.9.1.1.0

You keep trying to get me to update but my grandson's program needs the older version. This last time it just started to up date and so I tried to close it to stop it. The next time I opened it it had the Error message of Platform 1.9.1.9 not compatible with mini and max version of 1.9.1.1.0
== This happened ==
Every time Firefox opened
== June 2,2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; .NET4.0C; [xSP_2:681f5ad376d4d512934f0fc563b77747_201]; 66760703)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Any Ideas?

I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I deactivated Acrobat 9 Pro from a Windows 8 laptop and installed it on a new Windows 8 laptop and got the error message "Invalid Serial Number." I am entitled to this installation, can someone help?

I deactivated Acrobat 9 Pro from a Windows 8 laptop and installed it on a new Windows 8 laptop and got the error message "Invalid Serial Number." I am entitled to this installation, can someone help?

I see that the number in my Adobe Account is a MAC serial number – I purchased both the Mac and Windows versions of the program. I tried to enter the serial number of the Windows version into my account and it says it’s already registered. But when I installed the Windows version on a Windows computer I got the invalid serial number message. They have two different serial numbers! Can you help me with this?

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0

Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0
Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser address bar and page reloaded.
Uninstalled Acrobat 9, reinstalled, still same problem.
Help please!

Yes I can it only happens in the browser..
I reinstalled Windows on my machine and started over a couple of weeks ago.
When my desktop started up I didn’t have Acrobat installed and clicked on a pdf file and the open with xxx dialogue box came open.
I chose a different program as Acrobat wasn’t installed yet so it associated pdf files with another program.
Later Installed Acrobat and couldn’t associate the pdf file with acrobat so I went into Folder Options and manually associated PDF files with Acrobat.
Ever since then I get the error when something is downloaded and opened in the browser.
Works fine everywhere else and when I cancel the blank error, highlight the web address and press enter to reload it works 90% of the time.
Not sure what to do..

Error "Processing routine ENTRY in program ztest does not exist"

Hi All ,
           I facing problem in Samrt form driver program
        Error "Processing routine ENTRY in program ztest does not exist"
         when i given print through T.Code Me22n
         Can you suggest me why i facing this problem.........
This is below my driver program code:
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

Hi nIck,
         I write the code this way
          can you suggest me any changes are require
FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
PERFORM DATA_FETCH.
PERFORM DATA_PROCESS.
PERFORM CALL_FORM.
ENDFORM.                    "entry
*&      Form data_fetch
      text
FORM DATA_FETCH.
PONUMBER = NAST-OBJKY.
ENDFORM.                    "data_fetch
Regards
Raju
Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Error message 816-in SOST, Program -RSCONN01 is not picking this .

Similar Messages

Maybe you are looking for