Error message -9808, error message -9808, error message -9808

when i sync to pc and upgrade my iphone 4 the errer message -9808,

This problem seems to be quite common. I found a solution posted not too long ago here. Hope that helps!

Similar Messages

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

    The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

    I have the same issue. Does anybody know why this has happened

  • I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
    Thank you.

  • 'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK.  Help, please!

    Hi Again!
    I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
    Here are the details:  I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it).  I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box!  Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue. 
    Here's how this problem began:  I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black.  I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam.  When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message.  The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites!  They didn't have a solution, either.  I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible.  Here are the sites that receive the error message:
    http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
    http://cbslocal.com/eagles
    http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
    http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
    http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
    Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere.  Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time!  I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
    Thanks for taking the time to read my post.
    All suggestions/solutions are gratefully accepted.
    Thanks in advance for your help!
    DogPal 

    File Not Found Error in Welcome Screen
    07-Nov-2013 10:25
    Tags: #dreamweaver_cs6_update
    Help please!
    Live preview also not working.
    I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
    "On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
    Thanks,
    Martin Bond
    [personal information removed by moderator]

  • I repeatedly get "error during rendering/encoding of menus/slideshow" message.  This process is the same on my iMac, MacBook and another iMac.  I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

    I keep getting "error during rendering/encoding of menus/slideshows" message.  I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old.  Obviously I'm using iDVD.  I purchased an iMac about a year ago and moved to use this for dvd burning without problem.  A few months ago (approximately) I started to experience problems with burning with the error message above.  I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD.  Still the same message came up.  I lost count of how many times I repeated the process with different clips and variations and the same thing happened.  This was also the case with my MacBook and my husband's iMac.
    After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened.  They told me it must be the process that I am using that is incorrect!
    I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had.  The same message came up so they tried using my clips in one of their mac's.  The same message. They tried it with different clips and the same message.  The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page. 
    I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work!  It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion.  I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy.  It was mentioned that an up-date may have caused the problem on all my macs.
    I feel that this issue should be addressed by Apple as a matter of correctness.
    I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems.  Please Apple, keep/regain your good name and sort this out.
    Jayne Connelly

    Thanks Bengt W for your attention to this matter.  So much appreciated.  And thanks for putting me right on the aim of forums (new to this).  Although, you may regret asking for more information.  I've added everything I can below.
    The process I used is as follows:
    Import recorded clips of between 5 and 15minutes each from my video recorder into i
    Edit the clips (remove unwanted start and endng)
    Add title to front of clips
    ‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
    Open iDVD and ‘create new project’
    Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
    Add 2 submenus for each group of clips
    Select submenu  - drag and drop between 3 – 6 clips in each of the twosubmenus
    Change title colours on clips
    Dragand drop image into drop zones where required
    In‘map’ view I check for any yellow warnings before burning to disc
    In an attempt to remedy the problems I’ve tried the following:
    Try new DVD discs
    Try different themes (favourites and standardones)
    Change images in drop zones
    Start whole process again even from importingfrom camera again
    Two other completely different computers (iMacand MacBook) with iDVD
    Go to apple shop and use their computers to doin iDVD
    Try with one clip and no menu pages added
    Use a clip that I already have that did notoriginate from my camera
    Turn computer off and restart
    New hard drive
    New optical lense (thing)
    New DVD burner
    Saving to disc image rather than dvd disc
    Other points:
    I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
    For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across.  I used a theme that I've used before which has failed and added one sub menu page where the clip went.  It burned to disc image successfully.
    The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this.  That could have been an issue before (I didn’t check it) butnot now.
    Other technical stuff that I don't understand but you may:
    I have…… Mac OS X Version 10.6.7 with all updates onit.  Processor 2.8 GHz Intel Corei7.  Memory 4GB 1067 MHz DDR3.
    iDVD version 7.1.1
    HardwareOverview:
      Model Name: iMac
      Model Identifier: iMac11,1
      Processor Name: Intel Core i7
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 4GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: IM111.0034.B02
    SMC Version (system):            1.54f36
    OPTIARCDVD RW AD-5680H:
      Firmware Revision:     3AHB
      Interconnect:    ATAPI
      Burn Support:   Yes (AppleShipping Drive)
      Cache:    2048KB
      Reads DVD:    Yes
      CD-Write: -R, -RW
      DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
      Write Strategies:  CD-TAO,CD-SAO, CD-Raw, DVD-DAO
      Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
    If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement). 
    Eagerly awaiting your reply.
    Jayne

  • I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

    I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
    http://sourceforge.net/projects/kernelex/

  • Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

    Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

    I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
    Thanks
    Carol

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Error Message: Sorry...serious error PRE 7 must shut down

    PRE 7 was running well. In fact I edited four movies successfully.
    But now whenever I attempt to Open Project or New Project I get the message:
    "Sorry...serious error encountered...must shut down.
    It is really frustrating to pay for a product and then not have it work.
    Any suggestions will be sincerely appreciated.
    Henry-11

    I am running Windows XP. (latest version).
    The properties window for my drives says:
    C Drive
    Used Space 27.3 GB
    Free Space 205 GB
    Capacity 232 GB
    E (External Drive)
    Used Space 27.3 GB
    Free Space 205 GB
    Capacity 232 GB
    I use camcorder: Sony VX2000.
    I have deleted all previously made (4) movies, hoping for a clean start and hoping that would help. It did not.
    So now I don't even get a chance to load from the camecorder because when I click on New Project, I get the message: "Sorry..."
    Since PRE 7 has worked in the past, I can only assume that somewhere in there I did something wrong to cause this problem.
    Side note: I down loaded a tril version of PRE 8 to see if that would work. Same thing. I have since removed PRE 8.
    I will most sincerely appreciate any help because I am a total computer dummie.
    Note that I did update to the latest version of Quick  Time. Did not help.
    I am so frustrated over this. I recently videoed a Puppet Show and gal is really on my case for the finished product.

  • I cannot open the general pane in system preferences. I get a message saying there is an error. Any suggestions

    I cannot open the general pane in system preferences. I get a message saying there is an error. Any suggestions?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Lightroom 5 will not open and gives me a message saying it encountered an error reading from its preview cache. [was: Lightroom 5 question]

    @Lightroom 5 will not open and gives me a message saying it encountered an error reading from its preview cache.

    This is the Photoshop forum however.
    Close Lightroom and go to your Lightroom catalog folder.
    The default location is usually in Pictures.
    Delete the file in the catalog folder which ends Previews.lrdata
    Do not touch the catalog itself which ends.lrcat
    Then try re-launching Lightroom.

  • Everytime I open lightroom I get a pop up message saying "Lightroom encountered an error when reading from its preview cache and needs to quit" and it closes. Ive already tried reinstalling, nothing seems to work. Help please!

    Every time I open lightroom I get a pop up message saying "Lightroom encountered an error when reading from its preview cache and needs to quit" and it closes. Ive already tried reinstalling, nothing seems to work. Help please!

    Open the folder containing your catalog. In that folder you will find another folder with the extension .lrdata, and you need to delete that folder. After you do that, Lightroom should start normally and will create a new preview cache.

  • Error message on reading device saying error dialog user not activated

    error message on reading device saying     error dialog  user not activated.  unable to open book to read

    I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a  MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
    the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

  • Version 31.3, error in upadting RSS feeds. Error Message - not a valid feed.

    After upgrading to version 31.3, error in updating RSS feeds.
    Error message - not a valid feed.
    Unable to Attach screen shot of feed validator results

    The answer is in the guide, please read it carefully:
    https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
    You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so.

  • Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yeste

    Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2.  I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message.  This only started happening yesterday. Anyone else having this problem? Thanks.

    I am having the same problem and took the following steps to mitigate it to no avail.
    1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
    2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
    3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
    Please advise.

Maybe you are looking for