Error message a.2 beep/power LED codes

have a new 8200 elite convertible mini tower that has beep/power LED codes of 4 beeps - power LED blinks red 4 times @ 1hz - probable causse power failure - power supply overloaded - check storage devices expanion cards and/or system board (CPU power connector P#3 what does this mean?

Hello ben2039,
Try these solutions in this order
1.Check that the voltage selector, located on the rear of the power supply, is set to the appropriate voltage. Proper voltage setting depends on your region.
2. Open the hood and ensure the 4-wire power supply cable is seated into the connector on the system board.
3. Check if a device is causing the problem by removing ALL attached devices (such as hard, diskette, or optical drives, and expansion cards). Power on the system. If the system enters the POST, then power off and replace one device at a time and repeat this procedure until failure occurs. Replace the device that is causing the failure. Continue adding devices one at a time to ensure all devices are functioning properly.
4. Repair / Replace the power supply
5. Repair / Replace the system board.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Similar Messages

CAN'T START IPAD ERROR MESSAGE SHOWS ITUNE AND POWER CORD

my ipad wouldn't start as usual, it came up with error message showing itune and power cord sign.

Your ipad is in recovery mode.
You need to connect it to a computer running itunes as indicated.

Error message 'insertion of infotype 1001 (return code 3)'

Hello,
I have an IDoc containing many object like 'CP' and 'S' with their IT1001 relationships in UPDATE mode.
While posting the IDoc, it's going into 51 status with error message 'Error: insertion of infotype 1001 (return code 3)'.
Could you help me any possible solution?
Thanks.

Hello,
The IDoc contains IT1001 relationships in update mode of Object type 'S' and 'CP'.
There is no structural issue with the IDoc contents.
Is there any other specific issue?
Thanks.

Error Message: External program terminated with exit code 2

Hi ALL
We are doing REORG tablespace in DB13 and i am getting below error message. Please help us to resolve the issue.
20100430 113234 DB6PM 000 Reorg_Tbspc:Command DB6CLP failed on server
20100430 103959 DB6PM 000 Reorg_Tbspc:Exitcode:Error
20100430 103959 DB6PM 000 Reorg_Tbspc:ERRORMESSAGE: An SQL error occured. Will print output of the command
20100430 103959 DB6PM 000 Reorg_Tbspc:External program terminated with exit code 2
20100430 103959 DB6PM 000 REASON=C call failed
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Apr 30, 2010 6:55 AM

Exitcode 2, if returned from the OS, means "No such file or directory". Note that as of SAP kernel release 7, you usually do not have DB6CLP any more. Can you check if the executable is available in the SAP exe directory ?
If running SAÜ kernel 700 or higher, I suggest to apply a recent SP level.
Malte

I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off

I turned on my MacBook Pro and got an error message with several lines of code and then it turns off

Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?

Error message when exporting to Power Point

Hi,
I'm trying to export my Keynote to Power Point. This is a project that originated in Power Point and I jazzed up with Keynote. But when I export the progress bar almost finishes then I get a message saying, "Error: Out of Memory". Any ideas of what my issue is?
G5 Mac OS X (10.4.9) 1GB RAM

Be sure to post back your results as other people
forced to create PPT's would love to know
I built a completely new (I thought) theme using a .jpg figure for background, and a Keynote selected white foreground. Spent hours getting the title and body boxes formatted exactly as before. (Every time I select a new theme, I loose the text framing & formatting.)
This did not export. Even 1 blank slide did not export.
Other difference: I am using a 540 px by 720 px slide size. I don't know how I wound up there.
This is getting ridiculous. My client must have .ppt files. I can export them as .png slides, then paste each one into .ppt slides (blank). All capability of PowerPoint is gone. A rather sorry workaround.
This was all done with Keynote 2.0.2. I sure hope Keynote 3.0 exports better than this.
Jay

Error message FF762 " Condition type MWVS tax code A8 does not extist- MIRO

Dear all,
after support packagesi mplemented , I've the problem with transaction MIRO,
because I cannot released the invoic for the folloqiong error:
FF762 " Condition type MWVS tax code A8 does not extist.
Please, could you help me.
Thanks in advance for your cooperation
Gaetano

Hi,
Go to FTXP and give the tax code A8.
In the resultant screen, select the condition type MWVS, and link the condition type to an account key.
Make sure all the other tax determination settings are fine
Now, try the transaction it should work fine.
Hope this helps you

Error message 'hold down the power button'

Hi there, i was just sat with my macbook pro on my lap, surfing the web, when all of a sudden a grey filter filled the screen with a message telling me to 'hold the power button and turn it on again'.
But whats unsual is my sister got the same message whilst we were skyping earlier this afternoon.
I'm on a 15" macbook pro unibody running 10.6 snow leopard and she's on a 13" white macbook running 10.5 i think. Anyone else have this problem or know what it could be?
I've turned it back on and everything seems to be running okay! Any help is appreciated.
Hannah

If the message is one that comes up in several languages, that's called a kernel panic. They are usually, but not always, caused by hardware, with memory the leading hardware contributor. If you do a 'skype mac kernel panic' query on google, you'll find a number of hits, which may be the problem causing the kernel panic on your sisters system.
If you have your original OS X disks, you might run the Apple hardware test to see if it finds anything unusual. Find the gray OS X disk that says 'AHT Version x.x' in small print on the label (may be the application installation disk). Insert and reboot holding the D key down, or reboot holding the alt/option key, and choose the Apple hardware test. Choose the extended test when prompted. If it says everything is OK, I wouldn't think about it anymore unless you start getting them more often.
If you want to know more about kernel panics, this is a good FAQ: http://www.thexlab.com/faqs/kernelpanics.html

Error message when trying to redeem promo codes

I'm havig trouble redeeming promotional codes through iTunes and the App Store with my iPhone 3GS. Once I input the code, I get a white screen with what appears to be lines of code? I know the codes to be valid, but this has been happening every time for a little while. Is there something I'm doing wrong?
Thanks!

Have you tried to redeem the codes through iTunes on a computer?
I've never had an issue redeeming codes on my iPhone, except for when the code is not legible.

Error message saying not enough power to connect device to usb port

because a usp device was drawing too much power from my computer, one or more of your USB devices has been disabled

Rest the SMC:
Intel-based Macs: Resetting the System Management Controller (SMC)
Next, disconnect all uSB device and connect them one at a time until you find the problem. Could be due to cable or device.

Error message : HTTP responce code: 401 Access denied

Hi,
I am working on Oracle OpenScript 8.5.
After record the script when i click on playback I got an error message in the following Bold lines code.
http.get(33, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "GET_DOC_PAGE"), http.param("Action", "GetTemplatePage"), http.param("Page", "TRAY_SEARCH_FORM")), null, true, "iso-8859-1", "utf-8/");
http.get(37, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("siteId", "FCOE"), http.param("siteRelativeUrl", "%2Fhttp%3A%2F%2Fstclnx01.satyam.com%2Fidc%2Fidcplg"), http.param("ssUrlType", "2"), http.param("IdcService", "COLLECTION_DISPLAY"), http.param("hasCollectionID", "true"), http.param("dCollectionID", "42")), null, true, "utf-8/", "utf-8/");
http.get(41, "http://fusion.satyam.com/idc/idcplg", http.querystring(http.param("IdcService", "SS_GET_PAGE"), http.param("nodeId", "13"), http.param("siteId", "FCOE")), null, true, "iso-8859-1", "ASCII");
The error message in Result view is HTTP responce code: 401 Access denied .
The error message in Console View is oracle.oats.scripting.modules.http.api.exceptions.ThinBrowserException: HTTP response code: 401 Access denied
Note: When i comment that Bolded Code then the script was passed.
Can any one help me... ..it's very urgent.
Thanking you.
Regards,
Ramesh Dodda
Edited by: Ramesh Dodda on Jun 11, 2009 1:27 AM
Edited by: Ramesh Dodda on Jun 11, 2009 1:40 AM

Hi
Do you need a username and password to get to the application ?
Regards
Alex

TS2634 IOS6 error message Accessory unavailable uses too much power

IOS6 has stopped me from using my apple access connector that loads photos direct from memory card. Error message ,uses to much power. This worked fine on my iPad 2 until I upgraded, any suggestions how to fix this?

Hi Bobnewport1,
Welcome to the Support Communities!
The best way to load GoPro videos is to remove the micro sd card from the GoPro and insert it into a Card Reader attached to your iPad Camera Connector.
iPad: Using the Apple iPad Camera Connection Kit
http://support.apple.com/kb/ht4101
Cheers,
- Judy

Info Record - Error Message "Company Code not assigned to Country"

Hi,
I am a beginner in SAP MM.
I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location. While saving the data error message is being displayed as "Company Code not assigned to Country".
Please let me know the reason for this error.
Thanks,
Vinod.J

Hi Vinod,
The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
Check whether customizing given in below link is done,
http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
Regards,
Pravin

Unable to show error message in Advanced Table

Hi All,
I have an requirement to show a pdf ouput when user clicks on image or button in advanced table. I have created a new button in advanced table and when user clicks on button, I am showing an error message for testing. i used below code for CO extn, but when I click on button, I can see the diagnostic message but the error message is not showing in the page.
Need your assistance.
package XXJava.oracle.apps.ar.program.webui;
import java.io.BufferedInputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Hashtable;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import oracle.apps.ar.irec.common.webui.CustomCustSearchCO;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.webui.OADataBoundValueFireActionURL;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAImageBean;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.OAWebBeanData;
import oracle.apps.fnd.framework.webui.beans.nav.OAButtonBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
import oracle.cabo.ui.UIConstants;
import oracle.cabo.ui.action.FireAction;
public class XX_CustomCustSearchCO extends CustomCustSearchCO {
public XX_CustomCustSearchCO() {
public void processRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
super.processRequest(paramOAPageContext, paramOAWebBean);
OAAdvancedTableBean CustomCustSearchTable= (OAAdvancedTableBean)paramOAWebBean.findChildRecursive("CustomCustSearchTable");
          OAImageBean XX_Attach =(OAImageBean)CustomCustSearchTable.findChildRecursive("XX_Attach");
          /*Hashtable params = new Hashtable (1);
          //params.put ("XX_ACTION","XXX");
          params.put ("XX_ACTION","ATTACHMENT");
          Hashtable paramsWithBinds = new Hashtable(1);
          //paramsWithBinds.put ("XX_PRIMARY",new OADataBoundValueFireActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
          paramsWithBinds.put ("CONS_ID",new OADataBoundValueFireActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
          //paramsWithBinds.put ("CONS_ID",new OADataBoundValueFirePartialActionURL((OAWebBeanData) XX_Attach, "{$ConsInvId}"));
XX_Attach.setFireActionForSubmit("addnInfoEvent",params,paramsWithBinds,false,false);*/
FireAction localaction = new FireAction("tempEvent");
OAButtonBean XX_Button1 =(OAButtonBean)CustomCustSearchTable.findChildRecursive("XX_Button1");
XX_Button1.setAttributeValue(UIConstants.PRIMARY_CLIENT_ACTION_ATTR, localaction);
public void processFormRequest(OAPageContext paramOAPageContext, OAWebBean paramOAWebBean)
     super.processFormRequest(paramOAPageContext, paramOAWebBean);
String flaction = paramOAPageContext.getParameter("event");
if (flaction.equalsIgnoreCase("tempEvent"))
paramOAPageContext.writeDiagnostics(this, "XX_CustomCustSearchCO :Inside the event ", 1);
throw new OAException("The file path is invalid. Please check the value of the profile option",OAException.ERROR);
Regards,
Ram

You are throwing the message and then catching it yourself, and then printing the stack, which is what java is doing.
So, you need to
remove
}catch(Exception e)
e.printStackTrace();
and you would need to place the try block appropriately, since some methods you have used want exceptions caught.
Tapash

Error message in userexit_field_modification

Hello,
I'm doing a check in the "Ship-to-party" field at VA01-VA02 transactions.
Under some conditions, the value that the user inputs is not right so they want me to show an error message like "The ship to party is not valid for this kind of sales order" and block all the fields of the transaction except this one (KUWEV-KUNNR). If the user wants to proceed, has to change the value of ship-to-party for a good one.
First of all, I'm not sure if this user exit is the place to do this, but I've done it because the consultant told me and I haven't found an alternative. Now the problem is that when I show an error message, it prompts in a popup and then it closes the transaction... is there a way to avoid this and get the behaviour that I told you before?

Please try this Error meesage:
MESSAGE ID '00' TYPE 'E' NUMBER '435' WITH 'Please fill vaild' ' Ship-to-party.Press enter to continue'.
Remove the popup error message.Try to send some sample code and exit that your using.
Based on that I can suggest some validations.
I hope this may helpfull.
Thank you,
Thanks,
AMS

Error message a.2 beep/power LED codes

Similar Messages

Maybe you are looking for