Error message: AB064 when running S_ALR_87011964

Dear All Experts,
When I'm running an Asset Balance Report via S_ALR_87011964 , selects the Varient and executes, the following message appears:
No data was selected
Message No. AB064
Could anyone advice me what should I do to solve this?
Thank you in advance.
Best Regards,
Utarat.P

Hi Utarat,
Information message AB064 can happen for all various reasons. For example, for the date you choose there is indeed no value to be displayed with the variant that you created.
Here is just one example to illustrate why AB064 can happen:
Let's say you have done your legacy data transfer on 31.03.2009 and run the report on  31.03.2009.  Now you get Message no. AB064. In this case this would be justified and is correct since FY start values in table ANLC are updated for the next year only (2010).         
So, in order for you to find out why you may get AB064 ("No data was was selected") you need to have a closer look at your variant and its selection parameters. In most cases when AB064 is gotten when
trying to run a report it is in fact justified according to the selection parameters in the report.
I hope this helps to explain a bit.
Kind regards,
Brigitte

Similar Messages

  • Error message A12ES when running downloaded app?

    Anyone encounter the error message: A12ES?

    And in what program/ app on what system? You need to be more specific.
    Mylenium

  • I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

    Hi Brizill,
    Please refer to the help document below to understand the technical specifications for the same:
    System requirements | Photoshop
    Regards,
    Sheena

  • When I tried to open a fresh iTunes download my computer gave the error message : 'program cannot run in DOS mode'. Since both items are Apple, why might this be happening?

    When I tried to open a fresh iTunes download my computer gave the error message : 'program cannot run in DOS mode'. Since both items are Apple, why might this be happening?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99602)

  • Error message appears when trying to start server in VM Manager

    Error message appears when trying to start server in VM Manager
    OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
    When trying to restart server:
    OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • Why do I get this error message /opt/firefox/run-mozilla.sh: 399: /opt/firefox/firefox-bin: not found

    kubuntu 10.04
    firefox 10.0.2
    I downloaded and installed firefox 10.0.2 but when I...
    1. click the desktop icon nothing happens.
    2. use terminal mode and type firefox I get the following error message:
    /opt/firefox/run-mozilla.sh: 399: /opt/firefox/firefox-bin: not found
    How do I fix this?

    In short, I used kpackagekit to uninstall firefox. Then used synaptic to uninstall firefox. After that I manually scanned the computer for residual DIRs. In the end, I noticed that I still had 3 DIRs containing firefox: /opt/firefox, /usr/lib/firefox-10.0.1, /usr/lib64/firefox-10.0.1
    So removing firefox didn't work as expected.
    As it turns out, the copy of firefox residing in /opt/firefox is v3.5.3, but I have a current version in /usr/lib and /usrlib64. For some reason the, new install didn't replace the copy in /opt/firefox and the /usr/bin scripts firefox and run-mozilla.sh point to /opt/firefox.
    So when I use terminal mode and type firefox I get the cited error message. When I use my desktop icon it hangs.
    My remedy for this was to due the following:
    1. track down the location of the desktop icon: /usr/share/applications/firefox.desktop
    2. edit the file: sudo pico /usr/share/applications/firefox.desktop
    3. modify entry to: EXEC=/usr/lib/firefox-10.0.1 /firefox.sh u% ( save and exit)
    4. modify terminal command: firefox
    5. track down the location of the firefox command: /usr/bin/firefox and /usr/bin/
    firefox.ubuntu
    6. remove symbolic link: rm /usr/bin/firefox
    7. remove symbolic link: rm /usr/bin/firefox
    8. create new symbolic link: ln -sT /usr/lib/firefox-10.0.1/firefox.sh firefox
    9. create new symbolic link: ln -sT /usr/lib/firefox-10.0.1/firefox.sh firefox.ubuntu
    Everything works now as it should.
    I believe the cause of this problem was related to the fact that the mozilla-team made a change to the location of their upgrade/update libraries which affected the entries in the file: /etc/apt/sources.list. When the ppa library location changed, my kubuntu version 10.04 didn't make this change and residual copies of firefox were left behind and DIRs /usr/bin and /opt/firefox were not modified.
    Perhaps my experience will help others that tread this path.
    Maybe somebody can explain to me why we need 3 DIRs for firefox: /opt/fire ; /usr/lib ; /usr/lib64

  • I just started getting the error message below - when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this.  Why ? and how to to stop this request ?

    I just started getting the error message below, when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this."  Why ? and how to to stop this request ?

    There should be nothing native to the OS X which would ask for a password
    or  other information on a restart, unless accompanied by the traditional login
    box with your user name.
    There are adware or marginal products that could be called malware (bad)
    that would impose their presence and some items that could have been
    downloaded by accident or through some corrupted free software site; of
    those some could ask for and gain permission to go through your Mac
    and maybe even run in the background to do other nefarious misdeeds.
    You could see if startup in SafeBoot allows you access past that the Completer.
    Since I don't have a pile of helpful article links on how to resolve various issues
    I'd be looking them up one way or another.
    There are some helpful items in the site http://thesafemac.com - see Tech Guides
    listed  (adware, malware, & performance) plus a link to the adwaremedic page.
    Also, Apple support has a helpful page on how to remove adware and other bits:
    •Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • I need help re-installing itunes.  I get the error message: Install failed run preupgrade for Apple Mobile Device Support.  Any solutions?

    I've been trying to upgrade to/install Itunes 10.  When trying to do so, I get the error message: Install failed run preupgrade for Apple Mobile Device Support.
    Per what I saw as a response to someone else who had a similar issue, I thought a fix might be to uninstall my existing Itunes, then try to re-install the Itunes 10.  I tried that.  However, I still get the same error message.  Now, I have no Itunes.   
    I tried to email Apple, and they have not replied.
    Anyone offer any solutions? 

    me too did you get any help?

  • TS2570 How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the loadbar thn

    How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????

    Hello, what OSX version?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Java error message received when downloading torrent...help

    I receive the JAVA error message detailed when trying to download a torrent file on my laptop. I have two browsers installed, Firefox and Internet Explorer. I do not get the message if I download via I.E. so the problem is a Firefox/Java one. the message reads :
    java.lang.ClassNotFoundException: org.gudy.azureus2.ui.swt.Main
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at com.exe4j.runtime.LauncherEngine.launch(Unknown Source)
    at com.exe4j.runtime.WinLauncher.main(Unknown Source)
    Any help greatly appreciated. Java version up to date and correct version. (Why does it work with I.E. and not Firefox ??)

    Hmmm. Bang goes the theory of trying to get a heads-up on a 2324 with the other message.
    The following is a better bet with a 2330 (rather than a 2324), but it might be useful to get the possibility off the table.
    Let's try running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, does itunes launch without the 2324 afterwards?

  • Error message -54 when syncing

    error message -54 when trying ti sync

    There is no documentation on this crazy error code.  But, I think I figured this out.  I down loaded the latest version of desktop software to my desktop - running Aug 25, 2010 bundle 47.  I am running 64 bit Windows 7, new PC.  I received the error 0x83860028.  I went into "Organizer" and clicked on the "Reset Settings" button.  I then reconfigured the settings to sync e-mail and calendar only.
    I then re-ran the sync and it worked.  I am no techie but found this with luck.  Good luck.

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

    After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
    I have had this problem before and had to reinstall an earlier version of firefox.
    The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
    Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

Maybe you are looking for

  • Help with nav buttons please

    Hey there, i've recently been following a tutorial and I have come across a problem with the AS for the nav buttons,  http://www.flash-game-design.com/flash-tutorials/basic-flash-website-tutorial-6.html, the tutorial says to write: btnabout.onRelease

  • Mail not coming in even though it's on the server

    A friend is having trouble receiving her emails. She's running 10.4.11 on an eMac. The last email she received was 5 days ago. She can send emails no problem. When we look at the server via Account Info we can see all her emails but they're not trans

  • Sound not working for text alert just vibrate

    Sound not working for text alert just vibrate and no sound on keyboard

  • Troubles with Nokia C3

    Hi, I have a problem with mi Nokia C3. My Nokia doesn't open the communities, chat and mail. It shows me code-error 2. I think that happen because I deleted the authority certificates of security options by mistake. I appreciate any help of how I can

  • Reg: Adapters

    Hi All I'm confused with the adapter concepts. My query is below: For File to proxy we use adapter type as XI in communcation channel. Though we specify the adapter type as XI it is regarded as adapterless communication. But for the same reason we ha