Error message about too many devices activated.

Need to reset devices for Adobe reader. Error message about too many devices activated.

Reader has no such limitation. It's either Acrobat or Digital Editions.

Similar Messages

HT1386 ITunes keeps complaining about too many devices registered to my account Max 5

I have 3 devices registered with my account/appleID and Itunes remains complaining about 5 devices coupled to my account.
Bad user experience, who is going to help me?
The message remains: You cannot Authorize more than 5 computers while my account overview tells me that there 3 devices registered????
Why is this made so difficult all ?????

The number of computers that your account is authorised on and the number of computers and/or devices associated to an account are different things.
The 'manage devices' section of your account shows the computers and/or iOS devices that are associated to your account i.e. tied to it via iTunes Match, automatic downloads and/or redownloading past purchases : iTunes Store: Associating a device or computer to your Apple ID.
For the computers that are authorised (iOS devices aren't authorised/deauthorised) then have you had other computers in the past and/or updated/reinstalled the OS on your current computer and not deauthorised them ? IniIndividual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can log into your account on your computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : http://support.apple.com/kb/HT1420
There can be a maximum of 10 computers/devices associated to an account - but as a computer also has to be authorised (and there can be at most 5 computers authorised) for it to be able to associated, at most 5 of the 10 can be computers.

HT1351 error message: have too many apple id's

how many applie id's are we allowed in order to sync all media files to the iPod nano?

An iPod can contain protected content from a maximum of five different Apple IDs.
(94891)

I just bought a macbook and tried to add it to my home share but got a message that there were too many devices. How do I deauthorize machine I nolonger have?

I just bought anothe macbook and tried to add it to my home share but got a message about too many devises. How do I deauthorize machine I no longer have as I am sure some of those I threw out had itunes?

You'll have to log in to your iTunes account. On the Account Information page click on the 'Deauthorize All' button. You will have to re-authorize all the computers you presently want to associate with the iTunes account. (See screen shot below.)
In the future, to avoid having to deauthorize all and then re-authorize, select 'Deauthorize This Computer…' from the 'Store' menu on the computer you no longer want to use with the iTunes account.

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Digital Editions: The account you tried to log in with is activated on too many devices.

Digital Editions: The account you tried to log in with is activated on too many devices.
How do i reset it???
Chat does not run, my english is not got enough to call the hotline.
I didn*t find out how to contact adobe support by email :-(((
So, what can i do? Please help.
Otherwise, i can not read my ebooks any longer :-(((

The only people that I'm aware of who can reset your activation count is
the Adobe Help line that you call. And many of those people have to be
told that it is their job. This forum does not have the ability to forward
posts to Adobe technical support to get these kinds of problems resolved.
Trust in your English - or perhaps have a friend that speaks English better
do the talking.
I have to ask what you have been doing that used up all of the
activations. We need to fix the root of the problem.
=================

Router connection problems - DISH satellite receivers or too many devices?

(Sorry about that - I thought I had broken the message up.)
I'm having significant issues with my Linksys router timing out, and need help. I'll try to be as detailed as I can.
I have the following:
- Linksys WRT54G v3 wireless router I purchased off eBay 3-4 years ago. Using 128-bit WEP secirity. Even though the model says WRT54G, my Linksys setup page says I have a WRT54GL. Don't know if that's pertinent but thought I'd include the info)
- HP desktop running Vista Home Premium
- Gateway Solo laptop (circa 3Q 2002) running WinXP SP3, and also have WPC54G - Wireless-G Notebook Adapter
- Gateway M275 Notebook running Windows XP Tablet Edition w/SP3, internal wireless card
- Linksys WRE54G Wireless Range Expander, v3
My broadband internet connects to my cable modem, which then runs via ethernet to my router. I have my desktop connected to my router via (wired) ethernet cable (port 1), and the two laptops connect wirelessly. All three computers on my network run just fine and have had no connection issues until I had two (2) DISH satellite receivers installed this past Friday.
Prior to installation, I knew I would need the two receivers hooked up to my network via ethernet cable. Since one receiver was in the same room as my router, it was easy to run an ethernet cable from my router to the receiver (port 2). I had a challenge with the upstairs receiver, because I didn't have a direct connection, and wasn't sure how to wire it. So, I used my range expander by plugging in the expander into a nearby outlet, then connecting the receiver to the expander via ethernet cable.
I had some issues getting a good signal, and did some troubleshooting but made it work. Now I had five devices connected to my router: two with a wired ethernet cable and three wirelessly.
I started having connection timeouts within about 3-4 hours of satellite [receiver] installation. All of the sudden I couldn't connect to the internet on ANY device; both laptops couldn't connect wirelessly, my desktop couldn't connect, and the receivers were telling me my connection was bad. I checked modem but there were no issues. Still, I unplugged the power cable from the modem for a minute, then reconnected - still no internet. I called my cable company to have them troubleshoot the modem, but they pinged it several times & got positive results - still no internet, so I ruled the modem out.
I tried using the Windows connection troubleshooter to repair the problem, and got a DNS error message (which I don't know how to fix). I decided to unplug my router for 10-15 seconds, then plug back in - that got my internet connection going again. That lasted a couple hours & then failed. I unplugged the router again (is that a soft reset or a power cycle?), then reconnected & was able to connect to the internet. This happened a few more times over the weekend, and finally I decided the expander might be the issue (both DISH and Linksys tech support was not very helpful).
I found a way to wire my second receiver via ethernet cable (port 3), so now I had three wired devices, and two wireless devices. I thought this would fix the problem; it didn't, but at least I learned how to wire CAT5 cable. So I got that going for me... which is nice.
I plugged the ethernet cable directly from my modem to my desktop to test the timeout, but had no issues - the modem just wasn't the problem.
I was getting some IP address conflicts on my Norton Inernet Security, so I uninstalled that from my desktop, disconnected the power from the modem, disconnected the power from the router, shut down all devices, reset the IP addresses on the receivers, deleted the wireless connection from the laptops, shut down the desktop, and just left the whole mess alone for half a day. Then I reinstalled the Norton Internet Security, connected my wired devices, plugged the modem in, plugged the router in, reset my security, connected wirelessly with my laptops.
Within an hour my connection timed out.
Trying to chat with tech support wasn't feasible, as my connection kept going out. A guy at work said I shoudl ping my IP address, and let it repeat until my connection goes out. So I unplugged the router and plugged it back in to get an internet connection, the opened a cmd prompt and typed
ping 192.168.1.1 -t
I left it alone for a few hours, and when I came back, my internet connection was down, but I was still getting active pings - no problems there.
At this point I thought I had done everything except replacing my router (which I'm still tempted to do), but I called my broadband provider to see if there was anything they could do. One of the techs said I had too many devices connected to the internet, but I thought these routers were supposed to handle dozens of devices?
I finally called Linksys Tech Support and had a conversation for 90 minutes. We went through all the steps of unplugging the the modem, router & all connected devices, resetting the router, etc, etc. The only thing different he did was had me change my security from WPA to 64-bit WEP, and added passwords for DNA1 and DNS 2 (same password for each).
That was at 1:30am last night, and when I woke up to check my connection this morning, it was still connected. I have to check it again when I get home, but I'm wondering if I should just be prepared to get another router (and if so, any recommendations), or if there's something I'm still not doing that could resolve my issue - if I still have connection losses.
Also, I'm concerned about the security thing. If changing from WEP 128 or WPA to WEP 64 fixed my problem, I'm not sure I feel completely protected from intrusion - isn't that pretty much the least amount of security I can have (without forgoing it altogether)??
Finally, I've read a few threads suggesting possibly changing to static IP from DHCP; however, my satellite receiver installation documentation specifically advises against this for the receivers.
Anyway, I would very much appreciate some help.
Message Edited by CKdoubleU on 10-01-2008 08:43 AM

First please break that long text into separate paragraphs. No one wants to read one long runon sentences
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following i

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following. When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer. It did get progressively worse though, at first it crashed not that often and then got worse. So restores are failing, recovery, everything. Anyone run into this?
11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c bug type 110
incident identifier 8ff84a87

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hi
i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hello there ypda75,
I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899.
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
All the very best,
Sterling

Too many devices

I received an error message when trying to authenticate my Kindle device to use Overdrive that I had too many devices authenticated to my ID. What can I do?

This is a question for the DIgital Editions forum It has nothing to do with Reader.

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error message about too many devices activated.

Similar Messages

Maybe you are looking for