Error message about user agreement

I am trying to use Adobe Reader to view PDF files and am getting a message from Adobe saying that I need to click on the user agreement at the end and relaunch Adobe.  It's already installed and there is no option to click on the agreement; I did that when I installed it. Any suggestions?

If you are on a Mac, and it says you need to launch Adobe Reader, launch it from Applications. If more than one Adobe Reader is shown, launch and quit each in turn. You can then use it in a browser.

Similar Messages

  • Itunes will not open - no error message - flashes user agreement and closes

    I just updated Itunes to 10.5.1 I am running MacOs 10.6.8 on a macbook pro.  when I open Itunes it flashes the user agreement and then closes. no error message.  please, for the love of all that is holy, help me

    Dear Julian,
    I have had this problem for the past year, I have tried everything except the obvious (and correct) solution:
    immediately after you click itunes (from the dock) start rapidly pushing the enter button.  when the licence agreement flashes it already has "okay" highlighted so if you press enter at the right time it will continue opening Itunes - you may have to try it a few times to get it right, but it works.  isnt it wonderful that someone on this forum responded to your inquiry? thanks for posting!

  • Error message about forms when ID exported PDF is opened in Reader

    I'm using ID CS2.
    Has anyone successfully made navigation buttons on an exported PDF that doesn't produce an error message about forms when opened in Adobe Reader?
    There's an Adobe page about this that says it's caused by having a stroke too near a link field, but I can't seem to avoid the message if I place more than one button anywhere on a page. I've spent a lot of time playing with this and can't seem to find a workaround.
    Am I a sucker? Is anyone else trying to use this function other than me? It seemed like the perfect solution to this project I produced and now whenever a user opens the PDF they are greeted with a confusing message that has absolutely nothing to do with the functionality of the document.

    Well, everything in those PDFs were form fields. You can make form fields in Acrobat - and then you can right-click on 'em and change their appearance, whether or not they'll accept rich text input, whether or not they'll scroll, and so on. It could also be done in LiveCycle Designer, for what it's worth. I wrote a now-obsolete post about this in response to yours before Mike showed up with this video.
    Probably most of your work on your designs in InDesign would need to be trashed; you'd need to rebuild the whole thing in Acrobat or LiveCycle. I have to say that, unless your targeted documents are extremely simple, that this is one of the worst document translation workflows I've ever seen in the last fifteen years. It might work - I'm trying to keep an open mind, here - but if you have any non-Latin-script languages in your target list, or if print reproduction is what you're after, or if you're expecting tracking revisions to the translations to be anything but a nightmare, I would suggest that you test this method inside and out before progressing any further.

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?

    iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved?  What information is available besides the "learn more" option that does not deal with the problem?
    Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

    Thanks for the suggestion kcell. I've tried both versions
    9.0.115 and 9.0.124 and both fail with the policy permission error.
    I also tried with and without your crossdomain.xml file but
    with the same result. It looks like this file is intended for URL
    policy, instead of socket policy. Recently Adobe separated the two.
    When I run with the files installed on my dev PC, it does
    work, which makes sense because the flash player isn't loaded from
    an unknown domain.
    I did get one step closer. If a crossdomain.xml in the server
    root exists and the socketpolicy file is loaded from the app folder
    then the first two warnings disappear. The logs now show:
    OK: Root-level SWF loaded:
    https://192.168.2.5/trunk/myapp.swf
    OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
    OK: Policy file accepted:
    https://192.168.2.5/trunk/socketpolicy.xml
    Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
    seconds) while waiting for socket policy file. This should not
    cause any problems, but see
    http://www.adobe.com/go/strict_policy_files
    for an explanation.
    Warning: [strict] Ignoring policy file with incorrect syntax:
    xmlsocket://192.168.2.5:993
    Error: Request for resource at xmlsocket://192.168.2.5:993 by
    requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
    lack of policy file permissions.
    Which basically says, everything is okay, but you stay out
    anyway.
    PS: I found the XML schema files here:
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
    and the socket policy schema:
    http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
    UPDATE: When serving up the policy file on port 843 using the
    example perl script then the socket connection seems to be accepted
    and the connect succeeds. After that flex hangs trying to logon to
    the IMAP server.

  • Why do I get an error message about 'purging the central cache' everytime I open Bridge?

    Whenever I open Bridge I get an error message about the cache not being able to be read and that I should try purging the central cache in Cache Preferences.
    I've looked at the Cache Preferences and purged the cache as it suggested, but this message comes up every time I open Bridge. Any help gratefully received.
    Cheers,
    Cathie

    Your central cache file seems corrupted and you ave to delete this manual. Regarding your screenshot you seem to be on a Mac.
    Per OSX 10.7 the user library is hidden, if you don't have your user library in view use menu go in Finder with option key to reveal this library.
    Quit Bridge, go to your user library (user (your username) / library / Caches/ Adobe/ Bridge CSxx (your version) and inhere are a plug in file and a folder called Cache.
    Drag both files outside of the library (preferable to the trash) and restart Bridge. This creates both deleted files again but the cache folder is empty and you need to recache your files again (takes a bit of time) but then you should be OK.

  • Can we display custom error message in user decision step screen.

    Hi,
    My requirement is to display error message when approver selects reject button in user decision step.
    based on some condition i need to display error message in user decision screen when approver tries to
    reject .
    Please help
    Thanks,
    Phani

    Hi ibrahim,
    Thanks for your Replay.
    steps
    1. cretae global class with interface  IF_SWF_IFS_WORKITEM_EXIT.
    2. cretae Event with importing parameter.
    where i need to call EVENT_RAISED method ,do inned to call that method in
    IF_SWF_IFS_WORKITEM_EXIT ?
    how  SWRCO_EVENT_AFTER_EXECUTION value is passed to method EVENT_RAISED ?
    Thanks,
    phani

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • I updated iTunes from the update message and now my Windows computer (at work- I use Mac at home) keeps sending me error messages about MobileMe and iTunes. It indicates a .dll error but I can't find any such file. I tried removing the entire ITunes app.

    I downloaded an update to my iTunes app on my work Windows computer and now I am constantly getting error messages about MobileMe, when I download a webpage and marked slowness of my Outlook application. I tried removing iTunes and reloading directly from the Apple site, but no change. One of my peers is having the same issue and messages.
    Any suggestions?

    See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
    tt2

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

    How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

    Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
    If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
    you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

    Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

    Hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

    Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

    Thanks b noir,
    I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

  • Installed yosemite. CS5 no longer workers. Error message about Java SE 6. But SE 6 doesn't seem to have a MAC version. How can I resolve?

    Installed Yosemite on my Mac. CS5 no longer workers. When I try to open Photoshop, I get an error message about needing a Java SE 6. This is different from the other Java update Yosemite required (I already installed that). I assumed the higher update would suffice for previous versions, but I guess it doesn't work that way. Went over to the Java site, but SE 6 doesn't seem to have a MAC version. How can I resolve this?

    Prompted to install Java SE 6 Runtime | Mac OS 10.9
    Mylenium

Maybe you are looking for