Error message "Address doesn't exist "

Dear Experts,
In ME23n, when i give some purchase order and click on ADDRESS tab it is giving the error message as "'Address doesn't exist 51457447 4601225079"", And when i check the address in ADRC table for the same vendor via ADRNR number it is providing the address
And also it displays the address in the smartform preview.
But same is not populated in the ADDRESS tab.
Anybody help
Regards,
Venki....

Venki,
I once had exactly the same problem and message. It turned out that the error message was misleading..
In my case, a (custom) function module was returning an exception WITHOUT specifying a message. Subsequently the calling program also returned an exception, and simply reported the last message sitting in the SYST structure.
I recommend you set a breakpoint on the MESSAGE statement when debugging.
cheers
Paul Bakker

Similar Messages

Error message Address doesn't exist 24593 in t-code va01,va02,va03

Hi Friends,
After entering order in T-code va03 i get the error message Address doesn't exist 24593 .
please guide
thanks in advance,
regards.
Bhaskar

Check your ship-to Party.
Also read the S-note 865271

When creating po, pop up error message 'address doesn't exist'.

when creating po via me21n, when click delivery tab screen, pop up error message dialog box 'address doesn't exist T001 wsu20 00010'. message no is 'am010'. then i was forced to exit transaction.
ps: 'su20' is my plant, but in me21n, when selecting plant, i can see two 'su20', the diffrence is International address version. why there is two same plant

go into customizing and maintain an adress by clicking the envelope button in the detail to the plant. The adress in the customizing views itself is not sufficient.

Message "Address doesn't exist 6951" while posting GR to PO

Hello,
Trying to post a GR to a purchase order. A message comes saying "address doesn't exist 6951". While checking XK02, the system does not display the "Address" field. i.e. a run time error comes when the address field is checked. The error says
"Runtime Errors DYNPRO_NOT_FOUND"
"The system attempted to use dynpro 0000 in program "SAPLSZA1". This dynpro does not exist."
Checked the program. The exact point where the error is trigerred is while calling the sub screen i.e. "CALL SUBSCREEN ADDRESS INCLUDING 'SAPLSZA1' '0300'.
Please advise.
Note : This error is pertaining to only this vendor.
Regards,
Sakthy

HI,
vendor adress is stored with key "adress number" in table ADRC. Whatever the reason is, the adress number 6951 assigned to this particular vendor does not exist in table ADRC.
Best regards, Christian

FPCOPARA ERROR. Address doesn't exist

Hi Experts,
When i want to print a welcomes letter i get the error Address doesn't exist. Does some know why this message appear and how to solve it?
I've looked in the table ADRC en found out the the spefic address for that addressnumber is marked as a Maintenance object address.
This specific number is not linked to the business partner in the table BUT021_FS. In this table I found that the BP is linked to another address number that have the same city, street, zip-code etc. as the one that mared as Maintenance object address but this is marked as Business partner (customer, supplier).
Kind regards,
R.L.Groener

Hi,
Most likely master data is incomplete. Run that program with the same variant online and set a break-point on 'message' statement to find out where the problem is.

Error 'Address doesn't exist                  '

Hi guys
I am getting an error while running the background job for delivery duelist standard report RVV50R10C with some variant
this program is being run from last few months but i got this type of error first time
the error is shown in job log as below
Message Text                Message class    Message No   Message type
Address doesn't exist             AM                010                E
Can anyone tell why and when this error message occurs .
Thanks& regards
Babu

Hi,
Most likely master data is incomplete. Run that program with the same variant online and set a break-point on 'message' statement to find out where the problem is.

When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?

Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.].

ME21N Error "Address Doesn't Exist AM010"

Hello All,
I run into this error where when creating a Purchase Order using ME21N, marked the line item as free item, during save I get the error "Address Doesn't Exist". It doesn't seem to be of any error relating to the Purchase Order. Does anybody knows the reason which the system will generate this error?
Thanks.

Hello Dzez,
Thanks for the effort but I have already maintained the Vendor Address. I have another Vendor but I can create "Free Item" PO without any errors. It is a real pain as I need to create the Purchase Order urgently.....
Thanks.

BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD

Dear All
Please help me to solve this issue, during the BI Installer the process get errors message
"Error: ABAP Backend doesn't exist in SLD"
Follwoing the oss Note 983156 - BI configuration w. Template Installer
1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
Please check in Home -> Technical Systems -> select type ABAP. This
should have configuration of your ABAP (BI) system. yes the system already there.
2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
the connection is running well.
Please any one can help me to solve this issue,
Thanks and Best Regards,
Chrisna

Hi
I found your question because I wanted the answer to it too. I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA. I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD".
I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
I think I've solved it however.
I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>. This separates, to a degree, the physical server from the SAP instance.
I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>). When I used the real hostname in the template it ran to completion.
The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying. I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
Hope one or other of these things might help.
Murray

Address doesn't exist CUSTOMER_ADDRESS

Hi,
We have a Z program to create items in purchasing contracts. It normally works OK with all vendors/ contracts. For contracts of a particular vendor, it throws up an error "Address doesn't exist CUSTOMER_ADDRESS" message no. AM010. How to resolve this error?
ADRC table is having only one entry of ADRNR. i.e. I got ADRNR from LFA1 table by inputing vendor number. I input this ADRNR in ADRC table and there is only one record in ADRC.

Hi,
Do check the below OSS Note it may help you...
458251 - ADDR_EXP_SUBSCREEN: no ADDRESS_NOT_EXIST exception triggered
163454 - Addresses for master data missing after upgrade

Error message "resource does not exist"

C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???

hey guys just updating you all.. i wrote previously how my ovi store wasn't working, it gave me an error message 'resource does not exist'. i did soft/hard reset, also uninstalled ovi store and reinstalled STILL it wasn't working. It lasted a day. And today it's working fine. i think it was a problem with their server. It sorted it self out
But guys i did contact the team, and i got a reply that said i should do the following if it still doesn't work:
1. GO TO MENU
2. GO TO INTERNET
3. CLICK ON WEB
4.GO TO OPTIONS
5. GO TO CLEAR PRIVACY DATA
6. DELETE CATCHE AND COOKIES
That should apperantly work.
If not guys, then i wouldn't worry. Just like mines, yours should sort it self out

Cisco Aironet AIR-SAP2602I-E-K9 WAP -ERROR: VLAN 1000 doesn't exist on 'Radio1-802.11N 5GHZ' (see Services VLAN)

Hey guys,
I'm configuring my access points with two SSID's through the GUI. The first is a corporate SSID and the second a guest SSID. The corporate SSID needs to be attached to native VLAN 1000. The guest SSID needs to be attached to VLAN 1234. Both SSID's / VLAN's are to use WPAv2 AES CCMP with a PSK. Although I'm getting an error message indicating that my VLAN's don't exist on ‘Radio1-802.11N 5GHZ’ . Here are steps I take from start to error...
Create SSID’s with no security. CORP not to broadcast. Set CORP to use native VLAN 1000. Set guest to use VLAN1234.
Within security encryption manager > Set encryption mode cipher to AES CCMP on both VLAN 1000 and VLAN1234.
Within services > VLAN check that both VLAN’s have Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ selected. They do.
Within Security > SSID Manager – set client authenticated key management to mandatory, enable WPA – WPAv2. Set pre-shared key. Hit apply > “ERROR: VLAN 1000 doesn’t exist on ‘Radio1-802.11N 5GHZ’ (see Services > VLAN).
I get the same error for both SSID’s. Radio1-802.11N 5GHZ is "checked" against both VLAN's. Am I missing something? Both Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ are enable interfaces and are "up".
I'm pretty customed to switch and router IOS although have absolutely no exposure to WAP CLI.
Any assistance appreciated.

I've resolved this myself. The GUI is basically terrible and very buggy. I used the CLI and was able to add WPA through the CLI.

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Apple TV error message HDMI doesn't support HDCP

Apple TV error message HDMI doesn't support HDCP

I ran into this problem and I re-started the Apple TV by holding down the Menu+Down arrow buttons, restarting my television and now i can watch everything.

Error message "Address doesn't exist "

Similar Messages

Maybe you are looking for